Nokia 6020 CA-42 don't work !!! HELP !!!!!!

[cthamin]

Hello,
I try to connect my nokia phone 6020 with a ca-42 cable. And it doesn't
works.
Please help me.

Some information about my system :
Linux 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686 GNU/Linux

When i plug my phone dmesg gives me :

hub.c: USB new device connect on bus2/1, assigned device number 11
usbserial.c: Generic converter detected
usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0
for devfs)

I tried all version between 0.6.5 and 0.6.8. I patched the 0.6.5
version with patch gived here
http://lists.nongnu.org/archive/html/gnokii-users/2005-05/txtCJjjoD0cWP.txt.



I try to change 2 parameters
speed : 19200 and 115200. i have the same output

connection dlr3p and serial : I have the same output

Between two tests, i un-plug my phone and my cable for
reinitialisation.

My File Config is :
-------------------------------------------------------------------------------
[global]
port = /dev/ttyUSB0
model = 6020
initlength = default
connection = dlr3p
#connection = serial

use_locking = yes

serial_baudrate = 19200
#serial_baudrate = 115200

serial_write_usleep = 10000

smsc_timeout = 10

[gnokiid]
bindir = /usr/local/sbin/

[connect_script]
TELEPHONE = 12345678

[disconnect_script]

[logging]
debug = on

rlpdebug = off

xdebug = off
-------------------------------------------------------------------------------
The result is :
-------------------------------------------------------------------------------
 /usr/bin/gnokii --identify
GNOKII Version 0.6.8
LOG: debug mask is 0x1
Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding it..
phone instance config:
model: 6020
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: 10000
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Timeout: aborting command ``/usr/lib/gnokii/gnokii'' with signal 9
/usr/bin/gnokii: line 16: 10049 Killed                  timeout
$TIMEOUT $BINARY
"$@"
-------------------------------------------------------------------------------

With some gnokii version i have this message :

-------------------------------------------------------------------------------
erial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready

-------------------------------------------------------------------------------

Any suggestions are welcome.
Thanks for yours attentions.
Sorry for my english, i am french.

Regards.
Cedric.