Re: Problems with DKU-5 and 3220 on fc4

[BORBELY Zoltan]

Hi,

On Thu, Nov 03, 2005 at 05:31:51PM +0000, Darren Honeyball wrote:
> Other usb related stuff:
> 
> # lsusb -v
> Bus 001 Device 003: ID 10ac:10c6 Honeywell, Inc.
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0        64
>   idVendor           0x10ac Honeywell, Inc.
>   idProduct          0x10c6

[...]

> Manually binding the device:
> 
> # insmod /lib/modules/2.6.13-1.1532_FC4/kernel/drivers/usb/serial/ 
> usbserial.ko vendor=0x10ac product=0x10c6
> 
> I've tried with and without the pl2303 but nothing seems to happen,  
> and I get the following response from gnokii...

[...]

> Connecting
> Serial device: opening device /dev/ttyUSB0
> Serial device: setting RTS to low and DTR to low
> Serial device: setting RTS to high and DTR to high
> Serial device: setting speed to 19200
> Serial device: setting speed to 115200
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> Serial write: transmitter busy, waiting
> Serial write: transmitter ready
> 
> The last few lines just keep repeating infinitely and nothing ever  
> happens.
> 
> What am I doing wrong?

It seems the kernel doesn't support your cable. Try to ask your question
on your linux-usb mailing list.

Bye,
Bozo