|
| From: | Zloty |
| Subject: | Unknown error with dialvoice |
| Date: | Mon, 26 Dec 2005 16:09:36 +0100 |
|
Hi, I write own app, using libgnokii. But in testing I
found strange behavior. I check this using gnokii program and libgnoki, and it
was the same. Then I think it’s gnokii problem. I have N5110 &N5130 (REDHAT 9.0). When I made
gnokii –dialvoice MYNUMBER, then ma N5110 call to my number and
it’s ok, but when I reject a call on MYNUMBER phone then when I make next
gnokii –dialvoice MYNUMBER, I got ‘Dialing failed: Unknown error -
well better than nothing!!’, I make some tests and this error only occur
when call is rejected on destination phone. Any suggestions? I check debug log on normal call and then when this
error occurred there are different communicates in initialization. Whats mean: ISDN
cause: 00 11 location: user cause:
User busy Unsolicited frame, skipping... Best Regards Robert Logs: GNOKII Version 0.6.10 LOG: debug mask is 0x1 phone instance config: model: 6110 port_device: /dev/ttyS0 connection_type: 0 init_length: 0 serial_baudrate: 19200 serial_write_usleep: -1 hardware_handshake: 0 require_dcd: 0 smsc_timeout: 100 connect_script: disconnect_script: rfcomm_cn: 1 sm_retry: on Serial device: opening device /dev/ttyS0 Serial device: setting speed to 115200 Serial device: setting RTS to low and DTR to high Message sent: 0x40 / 0x0004 00 01 64
01
| d
[Sending Ack of type 0d, seq: 7] Message received: 0x0d / 0x0007 01 08 00 52 01 01
02
|
R Received message type 0d [Received Ack of type 40, seq: 80] [Sending Ack of type 01, seq: 0] Message received: 0x01 / 0x0008 01 08 00 04 01 65 11
00
|
e Received message type 01 ISDN cause:
00 11 location:
user cause:
User busy Unsolicited frame, skipping... [Sending Ack of type 40, seq: 1] Message received: 0x40 / 0x000c 01 01 64 03 01 2d 09 01 01 01 1b
58
| d - X Received message type 40 Message: Extended commands enabled. Message sent: 0x40 / 0x0003 00 01
66
|
f [Received Ack of type 40, seq: 1] [Sending Ack of type 40, seq: 2] Message received: 0x40 / 0x0014 01 01 66 01 34 39 35 35 30 38 32 30 38 37 32 33
| f 495508208723 37 31 32
00
| 712 Received message type 40 IMEI: 495508208723712 Message sent: 0x40 / 0x0004 00 01 64
01
|
d [Received Ack of type 40, seq: 2] [Sending Ack of type 40, seq: 3] Message received: 0x40 / 0x000c 01 01 64 03 01 2d 09 01 01 01 1b
58
| d - X Received message type 40 Message: Extended commands enabled. Message sent: 0x40 / 0x0004 00 01 c8
01
|
[Received Ack of type 40, seq: 3] [Sending Ack of type 40, seq: 4] Message received: 0x40 / 0x0025 01 01 c8 01 00 56 20 30 35 2e 33 30 0a 32 33 2d
| V 05.30 23- 30 34 2d 39 39 0a 4e 53 4b 2d 31 0a 28 63 29 20 |
04-99 NSK-1 (c) 4e 4d 50 2e
00
| NMP. Received message type 40 Received SW 05.30 Received model NSK-1 Message sent: 0x40 / 0x0004 00 01 64
01
|
d [Received Ack of type 40, seq: 4] [Sending Ack of type 40, seq: 5] Message received: 0x40 / 0x000c 01 01 64 03 01 2d 09 01 01 01 1b
58
| d - X Received message type 40 Message: Extended commands enabled. Message sent: 0x40 / 0x0004 00 01 c8
05
|
[Received Ack of type 40, seq: 5] [Sending Ack of type 40, seq: 6] Message received: 0x40 / 0x000a 01 01 c8 05 00 32 36 31 31
00
| 2611 Received message type 40 Received SW 05.30, HW 2611 comparing "NSK-1" and "" ……. comparing "NSK-1" and "NSC-1" Found model "NSK-1" Getting phone info (new way)... Message sent: 0x64 / 0x0004 00 01 00
10
|
[Received Ack of type 64, seq: 6] [Sending Ack of type 64, seq: 7] Message received: 0x64 / 0x0036 01 08 00 11 4e 30 38 37 32 33 37 31 32 00 4e 53 4b 2d 31 00 30 |
08723712 NSK-1 0 35 30 32 32 39 31 00 32 36 31 31 00 30 35 2e 33 |
502291 2611 05.3 30 00 77 4a ac
c6
| 0 wJ Received message type 64 Received imei 495508208723712 Received model NSK-1 Received revision SW 05.30, HW 2611 Message: Mobile phone identification received: IMEI:
495508208723712 Model:
NSK-1 Production
Code: 0502291 HW: 2611 Firmware:
05.30 Magic
bytes: 77 4a ac c6 Message sent: 0x02 / 0x0007 00 01 00 0d 00 00
02
|
[Received Ack of type 02, seq: 7] [Sending Ack of type 02, seq: 0] Message received: 0x02 / 0x0004 01 08 00 0e
|
Received message type 02 Message sent: 0x02 / 0x0005 00 01 00 20
02
|
[Received Ack of type 02, seq: 0] [Sending Ack of type 02, seq: 1] Message received: 0x02 / 0x0004 01 08 00
21
| !
Received message type 02 Setting CellBroadcast successful Message sent: 0x02 / 0x0007 00 01 00 0d 01 00
02
|
[Received Ack of type 02, seq: 1] [Sending Ack of type 02, seq: 2] Message received: 0x02 / 0x0004 01 08 00
0e
|
Received message type 02 Getting phone info (new way)... Message sent: 0x64 / 0x0004 00 01 00
10
|
[Received Ack of type 64, seq: 2] [Sending Ack of type 64, seq: 3] Message received: 0x64 / 0x0036 01 08 00 11 4e 30 38 37 32 33 37 31 32 00 4e 53 4b 2d 31 00 30 |
08723712 NSK-1 0 35 30 32 32 39 31 00 32 36 31 31 00 30 35 2e 33 |
502291 2611 05.3 30 00 77 4a ac
c6
| 0 wJ Received message type 64 Message: Mobile phone identification received: IMEI:
495508208723712 Model:
NSK-1 Production
Code: 0502291 HW: 2611 Firmware:
05.30 Magic
bytes: 77 4a ac c6 Message sent: 0x64 / 0x002d 00 01 00 12 10 64 53 2c dc f4 3a 36 3e 14 74 74
| dS, :6> tt 23 40 fc 92 4e 63 63 65 73 73 Message sent: 0x0c / 0x0005 00 01 00 40
01
| @
[Received Ack of type 64, seq: 3] [Received Ack of type 0c, seq: 4] [Sending Ack of type 0c, seq: 4] Message received: 0x0c / 0x006a 01 08 00 41 2e 2c e4 e5 e0 e6 00 64 65 66 33 e9 e8 00 67 68 69 34
| def3 ghi4 ec 00 6a 6b 6c 35 a3 00 6d 6e 00 70 71 72 73 37 24 df 00 74 75 76 38 fc f9 00
| pqrs7$ tuv8 77 78 79 7a 39 00 20 30 00 00 00 2e 2c 3b 2d 2b 23 2a 28 29 27 22 3c 3e bf a1 a7 3d a4 bc a5
00
| <> = Received message type 0c Message sent: 0x0a / 0x0004 00 01 00
70
| p
[Received Ack of type 0a, seq: 5] [Sending Ack of type 0a, seq: 5] Message received: 0x0a / 0x0013 01 08 00 71 01 00 01 0b 01 02 12 2b 01 90 62 f0
| q + b 30 00
00
| 0
Received message type 0a Voice Call Message sent: 0x01 / 0x0016 00 01 00 01 09 35 30 38 30 36 36 36 34 35 05 01
| 508066645 01 05 81 01 00
00
|
[Received Ack of type 01, seq: 6] [Sending Ack of type 01, seq: 6] Message received: 0x01 / 0x0004 01 08 00
40 |
@ Received message type 01 Unsolicited frame, skipping... [Sending Ack of type 01, seq: 7] Message received: 0x01 / 0x0008 01 08 00 04 00 64 68
00
|
dh Received message type 01 ISDN
cause: 00 68 location:
user cause:
Unknown Dialing failed: Unknown error - well better than
nothing!! Serial device: closing device |
| [Prev in Thread] | Current Thread | [Next in Thread] |