cable problem (CA-42 which it isnt)

[Michael Moritz]

Hi 

I have a problem with a cable I purchased from ABC Products. Apparently it has 
a PL2303 chip. It reports as 

0ea0:6858 Ours Technology, Inc.

I have tried following the instructions from the wiki 
(http://wiki.gnokii.org/index.php/New_DKU_cable) - added the vendor id and 
device id in pl2303.c in the kernel sources, reload kernel module, and it 
gives:

Jan 18 11:29:58 haendel kernel: usb 3-2: new full speed USB device using 
uhci_hcd and address 17
Jan 18 11:29:58 haendel kernel: pl2303 3-2:1.0: PL-2303 converter detected
Jan 18 11:29:58 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: device 
type: 2
Jan 18 11:29:58 haendel kernel: usb 3-2: PL-2303 converter now attached to 
ttyUSB0
Jan 18 11:29:59 haendel usb.agent[12989]:      pl2303: already loaded
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_open -  port 0
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0xc0:0x1:0x8484:0x0  1 - 9c
Jan 18 11:30:15 haendel kernel: usb 3-2: gnokii timed out on ep0out
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0x40:0x1:0x404:0x0  -110
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0xc0:0x1:0x8484:0x0  0 - 9c
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0xc0:0x1:0x8383:0x0  1 - c0
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0xc0:0x1:0x8484:0x0  1 - c0
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0x40:0x1:0x404:0x1  0
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0xc0:0x1:0x8484:0x0  1 - 9c
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0xc0:0x1:0x8383:0x0  1 - 9c
Jan 18 11:30:15 haendel kernel: usb 3-2: gnokii timed out on ep0out
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0x40:0x1:0x0:0x1  -110
Jan 18 11:30:15 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0x40:0x1:0x1:0x0  0
Jan 18 11:30:16 haendel kernel: usb 3-2: gnokii timed out on ep0out
Jan 18 11:30:16 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0x40:0x1:0x2:0x44  -110
Jan 18 11:30:16 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
0x40:0x1:0x8:0x0  0
Jan 18 11:30:16 haendel kernel: usb 3-2: gnokii timed out on ep0out

Jan 18 11:30:18 haendel kernel: usb 3-2: gnokii timed out on ep0out
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
set_control_lines - value = 3, retval = -110
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl (0) cmd = 0x5401
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl not supported = 0x5401
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl (0) cmd = 0x5401
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl not supported = 0x5401
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl (0) cmd = 0x5403
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl not supported = 0x5403
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_chars_in_buffer - port 0
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_chars_in_buffer - returns 0
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_set_termios -  port 0
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_set_termios - nothing to change...
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl (0) cmd = 0x5401
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_ioctl not supported = 0x5401
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_read_int_callback (0)
|:
Jan 18 11:30:18 haendel kernel: PL-2303 ttyUSB0: pl2303_read_int_callback - 
length = 8, data = 9c 00 03 43 4c 00 4b 00
Jan 18 11:30:18 haendel 
kernel: /usr/src/kernel-source-2.6.10/drivers/usb/serial/pl2303.c: 
pl2303_read_int_callback (0)
:| (repeat many times)

Any ideas,

Thanks

mimo