Re: Nokia 3120 hang

[Michael Durawa]

Hello

I compiled a new kernel 2.6.15.2 with patched pl2303.c and pl2303.h for the
ca-42 cable (vendor_id: 0x6547 product_id: 0x0232).
Now I get a few more lines after them listed above (I
changed /dev/usb/nokia3120 to /dev/ttyUSB0):

Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial device: opening device /dev/ttyUSB0


The output of dmesg:
usb 2-2: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 2-2:1.0: pl2303 converter detected
usb 2-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver



Michael


--

Michael Durawa

.gnokiirc
Description: Text document