SMS Send failed (Command timed out.

[Gregory Vera]

Please I need help badly I installed GNOKII Version 0.6.14 on CentOS 4, and I'm using Nokia 3120 with a DKU-5 cable. I was able to send an SMS once but after a struggle. But after after so many tries I can't send. If I run command gnokii --dialvoice it can dial the number I would have supplied, I can read SMS messages on the phone if I run gnokii --getsms IN 1. But sending is a problem, below are results of what comes when I try to send an sms.

# gnokii --sendsms +26311438000
GNOKII Version 0.6.14
LOG: debug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 2400
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial port speed 2400 not supported!
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                Serial write: transmitter busy, waiting
Serial write: transmitter ready
[Sending Ack of type 1b, seq: 0]
Message received: 0x1b / 0x0032
01 31 00 08 00 01 58 2c 00 26 56 20 30 36 2e 33 |  1    X, &V 06.3
31 20 20 20 20 20 0a 32 35 2d 31 31 2d 30 35 0a | 1      25-11-05
52 48 2d 31 39 0a 28 63 29 20 4e 6f 6b 0a 43 00 | RH-19 (c) Nok C
00 00                                           |                Received message type 1b
model length: 5
Received model RH-19
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |                [Received Ack of type 02, seq:  1]
[Sending Ack of type 02, seq: 1]
Message received: 0x02 / 0x002a
01 5b 00 15 00 01 0b 24 01 e8 00 00 0b 03 82 0c |  [     $       02 08 07 91 62 13 11 19 02 f1 82 08 01 02 00 ff |     b          55 55 81 08 02 00 00 00 00 00                   | UU             Received message type 02
Frame of type 0x02 (SMS handling) received!
SMSC Received
Please enter SMS text. End your input with <cr><control-D>:test me
General Data Coding
dcs: 0x0
Length: 0x7
user_data_length: 0x7
ValidityIndicator: 2
user_data: F4F29C0E6A9701
Sending
Sending SMS...(62)
Message sent: 0x02 / 0x003e
00 01 00 02 00 00 00 55 55 01 02 34 11 00 00 00 |        UU  4   00 04 82 0c 01 08 0b 91 62 13 41 83 00 f0 82 0c |         b A    02 08 07 91 62 13 11 19 02 f1 80 10 07 07 f4 f2 |     b          9c 0e 6a 97 01 55 55 55 55 55 08 04 01 a9       |   j  UUUUU     Serial write: transmitter busy, waiting
Serial write: transmitter ready
SM_Block: exiting the retry loop
SMS Send failed (Command timed out.)
Serial device: closing device


my .gnokiirc

port = /dev/ttyUSB0
model = 6510
initlength = default
connection = dku5
use_locking = yes
serial_baudrate = 2400
#serial_write_usleep = 10000
#sm_retry = 1
smsc_timeout = 10
[gnokiid]
bindir = /usr/local/sbin/
[connect_script]
TELEPHONE = 012614734
debug = on
rlpdebug = off
xdebug = off