gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Nokia e60 via dcu-2


From: slav0nic
Subject: Nokia e60 via dcu-2
Date: Tue, 07 Nov 2006 22:10:22 +0200
User-agent: IceDove 1.5.0.7 (X11/20061013)

OS debian etch/ kernel 2.6.18 / udev
try use e60-1 via default usb data-cable...

r00t:/home/slav0nic# lsusb
...
Bus 002 Device 003: ID 0421:0434 Nokia Mobile Phones

r00t:/home/slav0nic# ls -l /dev/bus/usb/002/003
crw-rw-r-- 1 root root 189, 130 2006-11-07 21:09 /dev/bus/usb/002/003

when i try enter this dev to gnokii cofig it print "Can't open file. File does not exist"

2) try load usbcore driver

modprobe usbcore vendor=0x0421 product=0x0434

but it does not create /dev/ttyUSB =\

3)on dmesg sume errors:

usb 2-1: USB disconnect, address 3
usb 2-1: new full speed USB device using ohci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
  Vendor:           Model:                   Rev:
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 2004993 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2004993 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
 sda:
sd 1:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
end_request: I/O error, dev sda, sector 2004992
printk: 202 messages suppressed.
Buffer I/O error on device sda, logical block 2004992
end_request: I/O error, dev sda, sector 2004992
Buffer I/O error on device sda, logical block 2004992
end_request: I/O error, dev sda, sector 2004928
...
end_request: I/O error, dev sda, sector 2004976
end_request: I/O error, dev sda, sector 0
end_request: I/O error, dev sda, sector 1
...

ps:
can i use e60 on linux :| ?





reply via email to

[Prev in Thread] Current Thread [Next in Thread]