Re: Gnokii 0.6.14 & Nokia N72

[Harsha Ramesh]

Hi Pawel,

I think i had goofed up with the model number.. I am pasting the details of the new results. Am i moving on the right track now?

thanks,
Harsha

(same configuration as mentioned earlier -- just changed the rfcomm conn to 14 )
---------------------
1. model = 7110
-----------------------
GNOKII Version 0.6.14
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
phone instance config:
model: 7110
port_device: 00:17:4B:A9:93:35
connection_type: 5
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
rfcomm_cn: 14
sm_retry: off
Connecting
Serial device: opening device 00:17:4B:A9:93:35
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2          
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2          
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2          
SM_Block: exiting the retry loop
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2          
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2          
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 03 01 32                               |      2          
SM_Block: exiting the retry loop
IMEI         : Unknown
Manufacturer : Unknown
Model        : Unknown
Product name : Unknown
Revision     : Unknown

---------------------
2. model = AT
---------------------
GNOKII Version 0.6.14
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
phone instance config:
model: AT
port_device: 00:17:4B:A9:93:35
connection_type: 5
init_length: 0
serial_baudrate: 115200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
rfcomm_cn: 14
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device 00:17:4B:A9:93:35
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ             
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1            
write: [ATE1<cr>]
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1       
write: [AT+CMEE=1<cr>]
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM         
write: [AT+CGMM<cr>]
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM          
write: [AT+GMM<cr>]
Initialization failed (11)
Telephone interface init failed: Command timed out.
Quitting.
Command timed out.

On 12/4/06, Pawel Kot <address@hidden> wrote:

Hi,

On 12/4/06, Harsha Ramesh <address@hidden> wrote:
> I have a new N72 and was trying out gnokii 0.6.14 release (FC6) on it and

Isn't it Series 60 rev 3?

> $ gnokii --identify
> GNOKII Version 0.6.14
> LOG: debug mask is 0x1
> LOG: rlpdebug mask is 0x1
> phone instance config:
> model: series60

This is incorrect. See docs.

take care,
pkot
--
Pawel Kot


_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users