Re: Nokia 6030 problems

[hacknslash]

Hi Konrad

To check is the cable is talking to the phone you can look at lsusb if
its installed, and also the output of dmesg.

Please let me know the output of both, as there is an alternative libusb
which is compatible with the 6000 series phones. Which we may be able to
utilise.


Regards
Ian


On Sat, 2007-03-24 at 14:05 +0100, Konrad Wojas wrote:
> Hi,
> 
> I've been trying to get gnokii to work with my Nokia 6030 and FBUS/CA-45
> cable, but I did not succeed. I tried the stock Ubuntu version
> (0.6.12-0ubuntu3), the latest stable version (0.6.14) and the latest
> version with the small common/misc.c patch.
> 
> My current config is:
> 
> [global]
> port = /dev/ttyUSB0
> # model = 6510
> model = 6030
> initlength = default
> connection = dku5
> # connection = dlr3p
> # connection = serial
> # use_locking = no
> serial_baudrate = 19200
> # smsc_timeout = 10
> [logging]
> debug = on
> 
> I also tried all options commented out above, they make no difference.
> 
> Example output is attached with prepended timestamps. 
> 
> By the way, the following line is printed in dmesg on every attempt:
> [1227124.105375] drivers/usb/serial/ark3116.c: can't set 0 baud, using 9600 
> instead
> 
> Any clue? The output doesn't look any different with the phone
> disconnected, could the cable be broken?
> 
> Best regards,
> Konrad
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users