Re: connection to nokia 3220 breaks after one gnokii-statement

[Burkhard Soehne]

>
> I recommend to avoid USB cables where possible.
>
There is no other possibility to connect the 3220 to a PC!

> > > > I can establish a connection between nokia 3220 to my PC only for one
> > > > or two gnokii-statements. For any additional command I will get a
> > > > timeout.
> > > > I use gnokii 0.6.12 on ubuntu 6.06.
> > >
> > > can you retry with the latest version?
> > > 0.6.18 has been released a couple of months ago
> >
> > I will try to compile the newest version. First I have to setup a
> > developing system. This will take some time...
>
> You can do it in few minutes on Ubuntu.
>
Yes, you are right. It was really simple.

Unfortunately the effect is nearly the same.
After booting the 3220 once I had a program-hang. Then twice a good connection 
and then an error forever. The error message has changed between the 
versions. Here is the debugging output.

Hardi

address@hidden:~$ gnokii --getdatetime
GNOKII Version 0.6.18
LOG: debug mask is 0x1
Config read from file /home/user/.gnokiirc.
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
<Ctrl-C> to abort
address@hidden:~$ gnokii --getdatetime
GNOKII Version 0.6.18
LOG: debug mask is 0x1
Config read from file /home/user/.gnokiirc.
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Error in link initialisation: 4
Telephone interface init failed: Problem occurred internal to model specific 
code.
Quitting.
Cannot unlock device.
Problem occurred internal to model specific code.
address@hidden:~$ gnokii --getdatetime
GNOKII Version 0.6.18
LOG: debug mask is 0x1
Config read from file /home/user/.gnokiirc.
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  0]
[Sending Ack of type 1b, seq: 2]
Message received: 0x1b / 0x0032
01 38 00 08 00 01 58 2c 00 26 56 20 30 33 2e 36 |  8    X, &V 03.6
30 20 20 20 20 20 0a 30 31 2d 31 30 2d 30 34 0a | 0      01-10-04
52 48 2d 33 37 0a 33 32 32 30 0a 28 63 0a 43 00 | RH-37 3220 (c C
00 00                                           |
Received message type 1b
model length: 5
Received model RH-37
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |
[Received Ack of type 19, seq:  1]
[Sending Ack of type 19, seq: 3]
Message received: 0x19 / 0x0016
01 32 00 0b 01 02 01 0c 01 03 07 d7 0a 02 16 34 |  2             4
01 00 04 04 01 00                               |
Received message type 19
Incoming clock!
Date/Time received!
Datum: 2007/10/02
Zeit: 22:52:01
Serial device: closing device
address@hidden:~$ gnokii --getdatetime
GNOKII Version 0.6.18
LOG: debug mask is 0x1
Config read from file /home/user/.gnokiirc.
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 80]
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 81]
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  2]
[Sending Ack of type 1b, seq: 4]
Message received: 0x1b / 0x0032
01 38 00 08 00 01 58 2c 00 26 56 20 30 33 2e 36 |  8    X, &V 03.6
30 20 20 20 20 20 0a 30 31 2d 31 30 2d 30 34 0a | 0      01-10-04
52 48 2d 33 37 0a 33 32 32 30 0a 28 63 0a 43 00 | RH-37 3220 (c C
00 00                                           |
Received message type 1b
model length: 5
Received model RH-37
Message sent: 0x19 / 0x0006
00 01 00 0a 00 00                               |
[Received Ack of type 19, seq:  3]
[Sending Ack of type 19, seq: 5]
Message received: 0x19 / 0x0016
01 32 00 0b 01 02 01 0c 01 03 07 d7 0a 02 16 34 |  2             4
35 00 04 04 01 00                               | 5
Received message type 19
Incoming clock!
Date/Time received!
Datum: 2007/10/02
Zeit: 22:52:53
Serial device: closing device
address@hidden:~$ gnokii --getdatetime
GNOKII Version 0.6.18
LOG: debug mask is 0x1
Config read from file /home/user/.gnokiirc.
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 80]
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 81]
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 82]
Serial device: closing device
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Error in link initialisation: 4
Telephone interface init failed: Problem occurred internal to model specific 
code.
Quitting.
Cannot unlock device.
Problem occurred internal to model specific code.
address@hidden:~$