|
| From: | Luca Clemente |
| Subject: | Nokia 6610i and CA-42 cable |
| Date: | Wed, 17 Oct 2007 15:03:38 +0200 |
|
Hello, I am trying to use an old Nokia 6610i in an OpenSuse box with an original CA-42 USB Nokia cable. The identify command get me the following feedback. I anyone able to give me some help? Thank you in advance Luca Dr. Clemente Luca - T.I.M. Srl GNOKII Version 0.6.18 LOG: debug mask is 0x1 Config read from file /tim/zb5/usr1/.gnokiirc. phone instance config: model: 6610i port_device: /dev/ptmx connection_type: 2 init_length: 0 serial_baudrate: 19200 serial_write_usleep: -1 hardware_handshake: 0 require_dcd: 0 smsc_timeout: 100 connect_script: disconnect_script: rfcomm_cn: 1 sm_retry: off Connecting Serial device: opening device /dev/ptmx Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to high Serial device: setting speed to 19200 Switching to FBUS mode Serial device: setting speed to 115200 Getting model... Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Serial device: closing device Serial device: opening device /dev/ptmx Serial device: setting speed to 115200 Serial device: setting RTS to low and DTR to low Error in link initialisation: 4 Telephone interface init failed: Problem occurred internal to model specific code. Quitting. Cannot unlock device. Problem occurred internal to model specific code. address@hidden:~> /usr/zb-svil/opt/gnokii-0.6.18/bin/gnokii --identify GNOKII Version 0.6.18 LOG: debug mask is 0x1 Config read from file /tim/zb5/usr1/.gnokiirc. phone instance config: model: 6610i port_device: /dev/ptmx connection_type: 2 init_length: 0 serial_baudrate: 19200 serial_write_usleep: -1 hardware_handshake: 0 require_dcd: 0 smsc_timeout: 100 connect_script: disconnect_script: rfcomm_cn: 1 sm_retry: off Connecting Serial device: opening device /dev/ptmx Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to high Serial device: setting speed to 19200 Switching to FBUS mode Serial device: setting speed to 115200 Getting model... Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Serial device: closing device Serial device: opening device /dev/ptmx Serial device: setting speed to 115200 Serial device: setting RTS to low and DTR to low Error in link initialisation: 4 Telephone interface init failed: Problem occurred internal to model specific code. Quitting. Cannot unlock device. Problem occurred internal to model specific code. |
| [Prev in Thread] | Current Thread | [Next in Thread] |