Re: Failing when entering FBUS mode

[Maarten Vanraes]

that looks similar to what i had with the new version, my solution was
that i compiled and ran a 0.6.14 once and since then, the new version
works. each time i reboot, i must execute 'gnokii-0.6.14/gnokii/gnokii
--identify' once, and after that, the 0.6.19 works...


> Hi,
>
> I used Gnokii a few years ago and loved it.  I now need to use it again
> and have
> been reminding myself how it works! :-)
>
> I think I have everything set correctly however I cannot talk to the phone
> correctly.  It seems to be communicating with something however just hangs
> when
> Switching to FBUS mode.
>
> Below is the debug output.  Any help would be gratefully appreciated.
> Thank you
>
> Dan
>
> # gnokii --identify
> GNOKII Version 0.6.19
> LOG: debug mask is 0x1
> Config read from file /etc/gnokiirc.
> phone instance config:
> model: 6210
> port_device: /dev/ttyS5
> connection_type: 2
> init_length: 0
> serial_baudrate: 19200
> serial_write_usleep: -1
> hardware_handshake: 0
> require_dcd: 0
> smsc_timeout: 100
> connect_script:
> disconnect_script:
> rfcomm_cn: 1
> sm_retry: off
> Connecting
> Serial device: opening device /dev/ttyS5
> Serial device: setting RTS to low and DTR to low
> Serial device: setting RTS to high and DTR to high
> Serial device: setting speed to 19200
> Switching to FBUS mode
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>
>