Re: Call and SMS Notification

[Fred Lefévère-Laoide]

The little bit I didn't noticed is that I had to poll myself by calling 
gn_sm_loop

which I did in an idle function ET VOILA !!!

Thanks

Fred

Fred Lefévère-Laoide a écrit :
> Am I missing something ?
>
> In the example (gnokii-extras/snippets/monitor/waitcall.c), after the 
> call gn_sm_functions(GN_OP_SetCallNotification
> there is a loop with gn_call_check_active(state);
>
> Is it mandatory if the call notification is accepted by the driver ?
>
>
> When I look at the sources, I don't see any select on the BT socket 
> after setting the notification ...
>
> Any help would be much appreciated ...
>
> Thanks
>
> Fred
>
> Fred Lefévère-Laoide a écrit :
> > Daniele Forsi a écrit :
> > > On Friday 28 March 2008, 12:13:30, Fred wrote:
> > >
> > > > I tried replacing AT+CLCC=1 by AT+CCWA=1 in atgen.c/steCallNotification
> > > > and I get no error but no callback either ...
> > >
> > > I don't know about SE W880i with unmodified libgnokii since you 
> > > didn't post the relevant part of debug log, but SE Z310i replies to 
> > > AT+CPAS with just "+CRING: " while we were expecting "+CRING: VOICE"
> > > see the fix I just committed with atgen.c,v 1.179
> >
> > It replies to +CCWA=1 with +CRING: VOICE
> > But gnokii doesn't see anything although hyperterminal see it ...
> >
> > I'll try +CPAS ...
> >
> > > the error with AT+CLCC=1 is a minor problem because the phone stays 
> > > in what is its default state (since ATZ is sent as first command) 
> > > which with some phones is ok
> > >
> > > Pawel, I would change it to just AT+CLCC because Sony-Ericsson docs 
> > > (dg_at_2006--07_r3a.pdf) state that "1" means "notifiy incoming data 
> > > calls" while we only check for VOICE, but the docs don't specify what 
> > > happens without arguments; from my tests both SE Z310i and Nokia 5300 
> > > always notify voice calls, with AT+CLCC=1 and with AT+CLCC