The only data cable I could find for my 6020 is a MA-8620E from Mobile Action
When I plug it into my Fedora10 machine, dmesg reports this:: usb 2-1: new low speed USB device using uhci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=0df7, idProduct=0800 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB Data Cable usb 2-1: Manufacturer: MobileAction Technology Inc.
When I look under /dev the following extra devices gets created:: usbdev2.2_ep00 usbdev2.2_ep02 usbdev2.2_ep81
Nothing extra.
My question is what port should I configure in my gnokiirc file for it to see my phone?
I tried all three devices mentioned on top but still get:: GNOKII Version 0.6.27 Couldn't read /root/.gnokiirc config file. Couldn't read /root/.gnokiirc config file. LOG: debug mask is 0x1 Config read from file /etc/gnokiirc.
phone instance config: model = 6020 port = /dev/usbdev2.3_ep81 connection = serial initlength = default serial_baudrate = 19200 serial_write_usleep = -1 handshake = software require_dcd = 0 smsc_timeout = 10
rfcomm_channel = 0 sm_retry = 0 Connecting Serial device: opening device /dev/usbdev2.3_ep81 Gnokii serial_open: open: No such device or address Couldn't open FBUS device: No such device or address Error in link initialisation: 1
Serial device: opening device /dev/usbdev2.3_ep81 Gnokii serial_open: open: No such device or address Couldn't open FBUS device: No such device or address Error in link initialisation: 1 Serial device: opening device /dev/usbdev2.3_ep81
Gnokii serial_open: open: No such device or address Couldn't open FBUS device: No such device or address Error in link initialisation: 1 Telephone interface init failed: Command failed. Quitting. Cannot unlock device.
Command failed.