Re: [gnokii] glibc invalid pointer

[Daniele Forsi]

2009/10/16 Janno Sannik:

> 1) for some reason sms sending fails with timeout.

your device might be slow to restart after ATZ
see, there is no OK after ATZ, it  is received only after AT+GMM:

> [2009-10-13 13:20:06][ERROR][15760] Message sent: 0x00 / 0x0004
> [2009-10-13 13:20:06][ERROR][15760] 41 54 5a 0d
>         | ATZ
> [2009-10-13 13:20:06][ERROR][15760] write: [ATZ<cr>]
> [2009-10-13 13:20:06][ERROR][15760] Message sent: 0x00 / 0x0005
> [2009-10-13 13:20:06][ERROR][15760] 41 54 45 31 0d
>        | ATE1
> [2009-10-13 13:20:06][ERROR][15760] write: [ATE1<cr>]
> [2009-10-13 13:20:06][ERROR][15760] Message sent: 0x00 / 0x000a
> [2009-10-13 13:20:06][ERROR][15760] 41 54 2b 43 4d 45 45 3d 31 0d
>         | AT+CMEE=1
> [2009-10-13 13:20:06][ERROR][15760] write: [AT+CMEE=1<cr>]
> [2009-10-13 13:20:06][ERROR][15760] Message sent: 0x06 / 0x0007
> [2009-10-13 13:20:06][ERROR][15760] 41 54 2b 47 4d 4d 0d
>        | AT+GMM
> [2009-10-13 13:20:06][ERROR][15760] write: [AT+GMM<cr>]
> [2009-10-13 13:20:06][ERROR][15760] read : [OK<cr><lf>]
> [2009-10-13 13:20:06][ERROR][15760] Message received: 0x06 / 0x0004
> [2009-10-13 13:20:06][ERROR][15760] 02 4f 4b 0d
>         |  OK

you can send ATZ with a terminal program (eg. minicom) and see how
long it takes to show OK

also since you are using a real serial modem you can try if setting
hardware handshake helps:
in your gnokiirc change handshake = software to hardware

-- 
Daniele Forsi