Re: Support for Nokia 5000

[Dave Plater]

On 12/14/2009 10:20 AM, Pawel Kot wrote:
> Hi,
>
> On Mon, Dec 14, 2009 at 07:03, Dave Plater <address@hidden> wrote:
>   
>> Hi, has anybody managed to get a Nokia 5000 working properly with
>> gnokii? I built cvs 20091212 to try and the model = 6510 that I used
>> connected to the phone but was unable to do anything else. When I tried
>> to download the phone book there was a continual string of retry
>> messages on the console and what looked like the occasional success but
>> nothing actually came through.
>>     
> Please provide debug output for stuff that do not work.
>
> take care,
>   
Sorry I took so long with more info, it's my daughters phone. To follow
is the cli output from xgnokii :-
xgnokii                                                                         
                              

Couldn't read /root/.gnokiirc config
file.                                                                           
                                 

Couldn't read /root/.gnokiirc config
file.                                                                           
                                 

LOG: debug mask is
0x1                                                                             
                                                   

Config read from file
/etc/gnokiirc.                                                                  
                                                


(xgnokii:1591): Gtk-WARNING **: horizontal scrolling not implemented

(xgnokii:1591): Gtk-WARNING **: horizontal scrolling not implemented
phone instance config:                                             
model = 6510                                                       
port = /dev/ttyUSB0                                                
connection = serial                                                
initlength = default                                               
serial_baudrate = 19200                                            
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  0]
[Sending Ack of type 1b, seq: 2]
Message received: 0x1b / 0x003e
01 33 00 08 00 01 58 38 00 31 56 20 30 34 2e 38 |  3    X8 1V 04.8
39 0a 31 33 2d 30 38 2d 30 38 0a 52 4d 2d 33 36 | 9 13-08-08 RM-36
32 0a 28 63 29 20 4e 6f 6b 69 61 20 20 20 20 20 | 2 (c) Nokia
20 20 20 20 20 20 20 0a 49 44 00 00 00 00       |         ID
Received message type 1b
model length: 6
Received model RM-362
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  1]
[Received Ack of type 1b, seq:  2]
[Sending Ack of type 1b, seq: 3]
Message received: 0x1b / 0x001a
01 33 00 01 00 01 41 14 00 10 33 35 33 31 30 30 |  3    A   353100
30 32 33 33 36 35 38 34 35 00                   | 023365845
Received message type 1b
Received imei 353100023365845
[Sending Ack of type 1b, seq: 4]
Message received: 0x1b / 0x003e
01 33 00 08 00 01 58 38 00 31 56 20 30 34 2e 38 |  3    X8 1V 04.8
39 0a 31 33 2d 30 38 2d 30 38 0a 52 4d 2d 33 36 | 9 13-08-08 RM-36
32 0a 28 63 29 20 4e 6f 6b 69 61 20 20 20 20 20 | 2 (c) Nokia
20 20 20 20 20 20 20 0a 49 44 00 00 00 00       |         ID
Received message type 1b
Received revision V 04.89
model length: 6
Received model RM-362
Getting network info ...
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Getting battery level...
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |

and this is as far as it gets if I try to do anything else it just
carries on retrying.
Thanks
Dave P