[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: gnokii and C1-02
From: |
Pawel Kot |
Subject: |
Re: gnokii and C1-02 |
Date: |
Fri, 13 Jan 2012 23:26:26 +0100 |
Hi,
2012/1/13 Petr Baudis <address@hidden>:
> Hi!
>
> On Fri, Jan 13, 2012 at 10:38:00PM +0100, Pawel Kot wrote:
>> On Thu, Jan 12, 2012 at 22:29, Petr Baudis <address@hidden> wrote:
>> > I'm trying to use gnokii for uploading files to C1-02 (apparently, USB
>> > mass storage mode requires SD card). However, I cannot get it to work
>> > in the series40 mode, only in the AT mode. gnokii just hangs in the
>> > series40 mode - in strace I see it writing many 'U' characters
>> > to the serial port, eventually just hanging at the next write() (never
>> > even trying to read()).
>>
>> Do you mind sharing more details on your configuration, logs, dmesgs,
>> etc? Without it, it's quit hard to say what could go wrong. Apparently
>> the phone does not respond to the configuration. So either you have
>> incorrect port or incorrect connection type.
>
> My configuration is:
>
> [global]
> port=/dev/ttyACM0
> connection=serial
You should use configuration from http://wiki.gnokii.org/index.php/DKU2
You may need to pay special attention to
http://wiki.gnokii.org/index.php/DKU2#Check_if_you_are_using_linux_kernel_2.6.30_or_later
take care,
--
Pawel Kot