Re: [Gnumed-devel] [Gnumed-bugs] <bug>: still happening

[Sebastian Hilbert]

I see a number of issues. First, xcopy seems to fail. You can potentiall 
bypass this by manually doing the copy stuff and removing the line from the 
batch file.

Second a python module is not found, 

module' object has no attribute 'symlink'

Karsten has supposedly fixed an issue I reported earlier related to wxGlade. 
If he sends me the updated files or rolls another rc3/4 I can provide binaries 
quickly. 

Did 1.5.6 work on Windows10 ?

Sebastian

Am Dienstag, 25. August 2015, 20:30:41 schrieb slappinjohn:
> Hi Karsten
> 
> rc3 acts like this:
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>gm-from-vcs.bat
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # GNUmed
> tarball start
> 
> up batch file
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # normally we
> would li
> 
> ke to use a link but Python
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # on Windows
> seems to
> 
> have problems importing
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # modules from
> directo
> 
> ry links
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM mklink /J
> ..\Gnumed ..
> 
> \client
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # hence we use
> xcopy:
> 
> http://commandwindows.com/xcopy.htm
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # note that no
> (old) l
> 
> ink should pre-exist lest we overwrite ourselves
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>xcopy ..\client
> ..\Gnumed
> 
> /E /I /F /H /O /Y
> 
> Zugriff verweigert
> 
> 0 Datei(en) kopiert
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>set PYTHONPATH=..;
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>Python gnumed.py
> --log-fil
> 
> e=gm-from-vcs.log --conf-file=gm-from-vcs.conf --local-import --debug
> 
> Running from local source tree
> (C:\Users\marc\Downloads\gnumed-client.1.5.7rc3)
> 
> ...
> 
> Adjusting PYTHONPATH ...
> 
> 
> 
> GNUmed startup: Cannot load GNUmed Python modules !
> 
> ---------------------------------------------------
> 
> CRITICAL ERROR: Program halted.
> 
> 
> 
> Please make sure you have:
> 
> 
> 
> 1) the required third-party Python modules installed
> 
> 2) the GNUmed Python modules linked or installed into site-packages/
> 
>     (if you do not run from a CVS tree the installer should have taken
> care of t
> 
> hat)
> 
> 3) your PYTHONPATH environment variable set up correctly
> 
> 
> 
> sys.path is currently set to:
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client
> 
> C:\Python27\lib\site-packages\setuptools-12.2-py2.7.egg
> 
> C:\Python27\lib\site-packages\hl7-0.3.2-py2.7.egg
> 
> C:\Python27\lib\site-packages\six-1.9.0-py2.7.egg
> 
> C:\Python27\lib\site-packages\twain-1.0.5-py2.7-win32.egg
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client
> 
> C:\WINDOWS\SYSTEM32\python27.zip
> 
> C:\Python27\DLLs
> 
> C:\Python27\lib
> 
> C:\Python27\lib\plat-win
> 
> C:\Python27\lib\lib-tk
> 
> C:\Python27
> 
> C:\Python27\lib\site-packages
> 
> C:\Python27\lib\site-packages\PIL
> 
> C:\Python27\lib\site-packages\win32
> 
> C:\Python27\lib\site-packages\win32\lib
> 
> C:\Python27\lib\site-packages\Pythonwin
> 
> C:\Python27\lib\site-packages\wx-2.8-msw-unicode
> 
> 
> 
> If you are running from a copy of the CVS tree make sure you
> 
> did run gnumed/check-prerequisites.sh with good results.
> 
> 
> 
> If you still encounter errors after checking the above
> 
> requirements please ask on the mailing list.
> 
> 
> 
> and after removing the Gnumed link - I thought it would be recreated -
> this did not happen!
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>gm-from-vcs.bat
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # GNUmed
> tarball start
> 
> up batch file
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # normally we
> would li
> 
> ke to use a link but Python
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # on Windows
> seems to
> 
> have problems importing
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # modules from
> directo
> 
> ry links
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM mklink /J
> ..\Gnumed ..
> 
> \client
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # hence we use
> xcopy:
> 
> http://commandwindows.com/xcopy.htm
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>REM # note that no
> (old) l
> 
> ink should pre-exist lest we overwrite ourselves
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>xcopy ..\client
> ..\Gnumed
> 
> /E /I /F /H /O /Y
> 
> Zugriff verweigert
> 
> 0 Datei(en) kopiert
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>set PYTHONPATH=..;..;
> 
> 
> 
> C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client>Python gnumed.py
> --log-fil
> 
> e=gm-from-vcs.log --conf-file=gm-from-vcs.conf --local-import --debug
> 
> Running from local source tree
> (C:\Users\marc\Downloads\gnumed-client.1.5.7rc3)
> 
> ...
> 
> Creating local module import symlink ...
> 
> real dir: C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\client
> 
>      link: C:\Users\marc\Downloads\gnumed-client.1.5.7rc3\Gnumed
> 
> Traceback (most recent call last):
> 
>   File "gnumed.py", line 638, in <module>
> 
>     setup_python_path()
> 
>   File "gnumed.py", line 191, in setup_python_path
> 
>     os.symlink(real_dir, link_name)
> 
> AttributeError: 'module' object has no attribute 'symlink'
> 
> 
> 
> Marc
> 
> Am 22.08.2015 um 14:31 schrieb Karsten Hilbert:
> > On Wed, Aug 19, 2015 at 04:55:04PM +0200, Karsten Hilbert wrote:
> >>> happened only on Windows8/10 on activating item in upper left corner of
> >>> notes tab.
> >> 
> >> I have uploaded a 1.5.7rc2 which contains improved logging.
> >> 
> >> The gm-from-vcs.bat still needs --local-import manually added
> >> to override a systemwide install on Windows.
> >> 
> >     http://www.gnumed.de/downloads/client/1.5/
> > 
> > now contains 1.5.7rc3 which offers an improved
> > gm-from-vcs.bat with both --local-import as well as
> > xcopy-rather-than-mklink support included.
> > 
> > Karsten