[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r18987 - gnunet/doc/man
From: |
gnunet |
Subject: |
[GNUnet-SVN] r18987 - gnunet/doc/man |
Date: |
Wed, 4 Jan 2012 16:46:29 +0100 |
Author: grothoff
Date: 2012-01-04 16:46:29 +0100 (Wed, 04 Jan 2012)
New Revision: 18987
Modified:
gnunet/doc/man/gnunet-arm.1
gnunet/doc/man/gnunet-monkey.1
gnunet/doc/man/gnunet-nat-server.1
gnunet/doc/man/gnunet-statistics.1
Log:
-formatting patch from GArik_
Modified: gnunet/doc/man/gnunet-arm.1
===================================================================
--- gnunet/doc/man/gnunet-arm.1 2012-01-04 15:22:49 UTC (rev 18986)
+++ gnunet/doc/man/gnunet-arm.1 2012-01-04 15:46:29 UTC (rev 18987)
@@ -1,4 +1,4 @@
-.TH GNUNET\-ARM 1 "Mar 7, 2009" "GNUnet"
+.TH GNUNET\-ARM 1 "Jan 4, 2012" "GNUnet"
.SH NAME
gnunet\-arm \- control GNUnet services
@@ -12,36 +12,28 @@
\fBgnunet\-arm\fP can be used to start or stop GNUnet services, including the
ARM service itself. The ARM service is a supervisor for GNUnet's service
processes. ARM starts services on-demand or as configured and re-starts them
if they crash.
.SH OPTIONS
-
-.TP
+.B
.IP "\-c FILENAME, \-\-config=FILENAME"
Use the configuration file FILENAME.
-
-.TP
+.B
.IP "\-e, \-\-end"
Shutdown all GNUnet services (including ARM itself). Running "gnunet-arm -e"
is the usual way to shutdown a GNUnet peer.
-
-.TP
+.B
.IP "\-h, \-\-help"
Print short help on options.
-
-.TP
+.B
.IP "\-L LOGLEVEL, \-\-loglevel=LOGLEVEL"
Use LOGLEVEL for logging. Valid values are DEBUG, INFO, WARNING and ERROR.
-
-.TP
+.B
.IP "\-i SERVICE, \-\-init=SERVICE"
Starts the specified SERVICE if it is not already running. More specifically,
this makes the service behave as if it were in the default services list.
-
-.TP
+.B
.IP "\-k SERVICE, \-\-kill=SERVICE"
Stop the specified SERVICE if it is running. While this will kill the service
right now, the service may be restarted immediately if other services depend on
it (service is then started 'on-demand'). If the service used to be a
'default' service, its default-service status will be revoked. If the service
was not a default service, it will just be (temporarily) stopped, but could be
re-started on-demand at any time.
-
-.TP
+.B
.IP "\-s, \-\-start"
Start all GNUnet default services on this system (and also ARM). Naturally,
if a service is demanded by a default service, it will then also be started.
Running "gnunet-arm -s" is the usual way to start a GNUnet peer.
-
-.TP
+.B
.IP "\-v, \-\-version"
Print GNUnet version number.
Modified: gnunet/doc/man/gnunet-monkey.1
===================================================================
--- gnunet/doc/man/gnunet-monkey.1 2012-01-04 15:22:49 UTC (rev 18986)
+++ gnunet/doc/man/gnunet-monkey.1 2012-01-04 15:46:29 UTC (rev 18987)
@@ -1,4 +1,4 @@
-.TH GNUNET\-MONKEY 1 "Nov 4, 2010" "GNUnet"
+.TH GNUNET\-MONKEY 1 "Jan 4, 2012" "GNUnet"
.SH NAME
gnunet\-monkey \- automatically debugging for services
@@ -12,28 +12,22 @@
\fBgnunet\-monkey\fP used to automatically debug a service.
.SH OPTIONS
-
-.TP
+.B
.IP "\-h, \-\-help"
Print short help on options.
-
-.TP
+.B
.IP "\-L LOGLEVEL, \-\-loglevel=LOGLEVEL"
Use LOGLEVEL for logging. Valid values are DEBUG, INFO, WARNING and ERROR.
-
-.TP
+.B
.IP "\-m, \-\-mode"
Monkey's mode of operation: text: for writing debugging report in a text file,
email: for sending debugging report to an email address.
-
-.TP
+.B
.IP "\-b, \-\-binary"
Path of the binary to debug with Monkey.
-
-.TP
+.B
.IP "\-o, \-\-output"
Only required in text mode: The path of the text file in which Monkey should
write the debugging report.
-
-.TP
+.B
.IP "\-v, \-\-version"
Print GNUnet version number.
Modified: gnunet/doc/man/gnunet-nat-server.1
===================================================================
--- gnunet/doc/man/gnunet-nat-server.1 2012-01-04 15:22:49 UTC (rev 18986)
+++ gnunet/doc/man/gnunet-nat-server.1 2012-01-04 15:46:29 UTC (rev 18987)
@@ -1,11 +1,12 @@
-.TH GNUNET\-NAT\-SERVER 1 "Jul 1, 2011" "GNUnet"
+.TH GNUNET\-NAT\-SERVER 1 "Jan 4, 2012" "GNUnet"
.SH NAME
gnunet\-nat\-server \- help GNUnet setup test network setup with NAT
.SH SYNOPSIS
.B gnunet\-nat\-server
-.RI [ options ] PORT
+.RI [ options ]
+.RI PORT
.br
.SH DESCRIPTION
@@ -22,8 +23,7 @@
.SH OPTIONS
-
-.TP
+.B
.IP "\-c FILENAME, \-\-config=FILENAME"
Use the configuration file FILENAME.
Modified: gnunet/doc/man/gnunet-statistics.1
===================================================================
--- gnunet/doc/man/gnunet-statistics.1 2012-01-04 15:22:49 UTC (rev 18986)
+++ gnunet/doc/man/gnunet-statistics.1 2012-01-04 15:46:29 UTC (rev 18987)
@@ -1,11 +1,12 @@
-.TH GNUNET\-STATISTICS 1 "Mar 6, 2009" "GNUnet"
+.TH GNUNET\-STATISTICS 1 "Jan 4, 2012" "GNUnet"
.SH NAME
gnunet\-statistics \- Display statistics about your GNUnet system
.SH SYNOPSIS
.B gnunet\-statistics
-.RI [ options ] [ VALUE ]
+.RI [ options ]
+.RI [ VALUE ]
.br
.SH DESCRIPTION
@@ -13,32 +14,25 @@
gnunet\-statistics can be used to set a value by giving the options \-n, \-s
and also a VALUE.
.SH OPTIONS
-
-.TP
+.B
.IP "\-c FILENAME, \-\-config=FILENAME"
Use the configuration file FILENAME.
-
-.TP
+.B
.IP "\-h, \-\-help"
Print short help on options.
-
-.TP
+.B
.IP "\-L LOGLEVEL, \-\-loglevel=LOGLEVEL"
Use LOGLEVEL for logging. Valid values are DEBUG, INFO, WARNING and ERROR.
-
-.TP
+.B
.IP "\-n NAME, \-\-name=NAME"
Each statistic has a name that is unique with in its subsystem. With this
option, the output can be restricted to statistics that have a particular name.
-
-.TP
+.B
.IP "\-p, \-\-persistent"
When setting a value, make the value persistent. If the value used to be
persistent and this flag is not given, it will be marked as non\-persistent.
-
-.TP
+.B
.IP "\-s SUBSYSTEM, \-\-subsystem=SUBSYSTEM"
Statistics are kept for various subsystems. With this option, the output can
be restricted to a particular subsystem only.
-
-.TP
+.B
.IP "\-v, \-\-version"
Print GNUnet version number.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r18987 - gnunet/doc/man,
gnunet <=