[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r22991 - in gnunet-planetlab/gplmt/contrib: . tasklists
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] r22991 - in gnunet-planetlab/gplmt/contrib: . tasklists |
|
Date: |
Mon, 30 Jul 2012 17:23:54 +0200 |
Author: wachs
Date: 2012-07-30 17:23:54 +0200 (Mon, 30 Jul 2012)
New Revision: 22991
Added:
gnunet-planetlab/gplmt/contrib/tasklists/
gnunet-planetlab/gplmt/contrib/tasklists/check_fedora_version.xml
gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet.xml
gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc12.xml
gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc8.xml
gnunet-planetlab/gplmt/contrib/tasklists/start_gnunet_fc12.xml
gnunet-planetlab/gplmt/contrib/tasklists/stop_gnunet_fc12.xml
gnunet-planetlab/gplmt/contrib/tasklists/test_sftp_tasks.xml
gnunet-planetlab/gplmt/contrib/tasklists/test_tasks.xml
Removed:
gnunet-planetlab/gplmt/contrib/check_fedora_version.xml
gnunet-planetlab/gplmt/contrib/deploy_gnunet.xml
gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc12.xml
gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
gnunet-planetlab/gplmt/contrib/sftp_tasks.xml
gnunet-planetlab/gplmt/contrib/start_gnunet_fc12.xml
gnunet-planetlab/gplmt/contrib/tasks.xml
Modified:
gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment.conf
gnunet-planetlab/gplmt/contrib/simpletasks.xml
gnunet-planetlab/gplmt/contrib/test.conf
Log:
- mv taskslist to separate dir
Deleted: gnunet-planetlab/gplmt/contrib/check_fedora_version.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/check_fedora_version.xml 2012-07-30
15:13:58 UTC (rev 22990)
+++ gnunet-planetlab/gplmt/contrib/check_fedora_version.xml 2012-07-30
15:23:54 UTC (rev 22991)
@@ -1,32 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="Check Fedora version on node"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
-
- <run id="0" name="check peer">
- <!-- Check if peer is working -->
- <command>sudo date</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>2012</expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
-
-
- <run id="1" name="Check for Fedora 8 ">
- <command>cat /etc/fedora-release</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>Fedora release 8 (Werewolf)</expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="2" name="Check for Fedora 12 ">
- <command>cat /etc/fedora-release</command>
- <arguments>Fedora release 8 (Werewolf)</arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>Fedora release 12 (Constantine)</expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
-
-</tasklist>
Deleted: gnunet-planetlab/gplmt/contrib/deploy_gnunet.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_gnunet.xml 2012-07-30 15:13:58 UTC
(rev 22990)
+++ gnunet-planetlab/gplmt/contrib/deploy_gnunet.xml 2012-07-30 15:23:54 UTC
(rev 22991)
@@ -1,457 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
-
- <run id="0" name="check peer">
- <!-- Check if peer is working -->
- <command>sudo date</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>2012</expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
-
-
- <sequence enabled="false">
- <!-- Install dependencies -->
- <run id="1" name="Install dependencies with yum : make">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>make</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : gcc">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gcc</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : autoconf">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>autoconf</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : automake">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>automake</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : texinfo">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>texinfo</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : m4">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>m4</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : gettext">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>texinfo</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : gettext-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gettext-devel</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : zlib-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>zlib-devel</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : sqlite-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>sqlite-devel</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : gmp-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gmp-devel</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : glpk glpk-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gmp-devel</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="false">
- <!-- Remove too old packages -->
- <run id="1" name="Remove outdated packages: libgcrypt">
- <command>sudo rpm -e --nodeps </command>
- <arguments>libgcrypt</arguments>
- <timeout>60</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Remove outdated packages: libgpg-error-devel">
- <command>sudo rpm -e --nodeps </command>
- <arguments>libgpg-error-devel</arguments>
- <timeout>60</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Remove outdated packages: libgpg-error">
- <command>sudo rpm -e --nodeps </command>
- <arguments>libgpg-error</arguments>
- <timeout>60</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="false">
- <!-- Setup subversion -->
- <run id="1" name="Install dependencies with yum : subversion">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>subversion</arguments>
- <timeout>60</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Create subversion folders">
- <command>mkdir ~/.subversion; mkdir ~/.subversion/auth; mkdir
~/.subversion/auth/svn.ssl.server </command>
- <arguments></arguments>
- <timeout>60</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <put id="0" name="Copy GNUnet certificate to node">
- <source>contrib/gnunet-svn-cert</source>
-
<destination>.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</destination>
- <stop_on_fail>false</stop_on_fail>
- </put>
- </sequence>
-
- <sequence enabled="false">
- <!-- Install depencies from source -->
- <sequence enabled="false">
- <!-- Install libtool -->
- <run id="1" name="Download libtool">
- <command>mkdir libtool; cd libtool; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack libtool">
- <command>cd libtool; tar xfvz </command>
- <arguments>libtool-2.4.2.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libtool">
- <command>cd libtool/libtool-2.4.2; ./configure </command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libtool">
- <command>cd libtool/libtool-2.4.2; sudo make install</command>
- <arguments> </arguments>
- <timeout>360</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Libtool clean up">
- <command>sudo rm -rf libtool</command>
- <arguments> </arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install libcurl -->
- <run id="1" name="Download libcurl">
- <command>mkdir libcurl; cd libcurl; wget </command>
-
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack libcurl">
- <command>cd libcurl; tar -xzvf</command>
- <arguments>curl-7.26.0.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libcurl">
- <command>cd libcurl/curl-7.26.0; ./configure </command>
- <arguments> --with-gnutls</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libcurl">
- <command>cd libcurl/curl-7.26.0; sudo make install</command>
- <arguments> </arguments>
- <timeout>480</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install glpk -->
- <run id="1" name="Download glpk">
- <command>mkdir glpk; cd glpk; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack glpk">
- <command>cd glpk; tar -xzvf</command>
- <arguments>glpk-4.47.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure glpk">
- <command>cd glpk/glpk-4.47; ./configure </command>
- <arguments> --with-gnutls</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install glpk">
- <command>cd glpk/glpk-4.47; sudo make install</command>
- <arguments> </arguments>
- <timeout>480</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install libextractor -->
- <run id="1" name="Download libextractor">
- <command>mkdir libextractor; cd libunistring; wget </command>
-
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack libextractor">
- <command>cd libextractor; tar -xzvf</command>
- <arguments>libextractor-0.6.3.tar.gz</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libextractor">
- <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>720</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libextractor">
- <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
- <arguments> </arguments>
- <timeout>720</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="false">
- <!-- Install libextractor from svn -->
- <!-- svn is broken atm -->
- <run id="1" name="Download Extractor" >
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/Extractor</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Bootstrap Extractor" enabled="true">
- <command>cd Extractor; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure Extractor" enabled="true">
- <command>cd Extractor; ./configure </command>
- <arguments></arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install Extractor">
- <command>cd Extractor; sudo make install</command>
- <arguments> </arguments>
- <timeout>480</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="false">
- <!-- Install libmicrohttpd from svn -->
- <run id="1" name="Download libmicrohttpd" enabled="true">
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/libmicrohttpd</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Bootstrap libmicrohttpd" enabled="true">
- <command>cd libmicrohttpd; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libmicrohttpd" enabled="true">
- <command>cd libmicrohttpd; ./configure </command>
- <arguments>--with-gnutls=/usr --enable-messages
--enable-curl</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libmicrohttpd">
- <command>cd libmicrohttpd; sudo make install</command>
- <arguments> </arguments>
- <timeout>480</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install GNUnet from svn -->
- <run id="1" name="Download GNUnet" enabled="true">
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/gnunet</arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Bootstrap GNUnet" enabled="true">
- <command>cd gnunet; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>120</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure GNUnet" enabled="true">
- <command>cd gnunet; ./configure </command>
- <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--enable-logging=verbose</arguments>
- <timeout>720</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install GNUnet">
- <command>cd gnunet; make install</command>
- <arguments> </arguments>
- <timeout>720</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="false">
- <!-- Postinstallation setup -->
- <run id="1" name="Create GNUnet directory" enabled="true">
- <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
- <arguments></arguments>
- <timeout>20</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Set GNUNET_PREFIX" enabled="true">
- <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
- <arguments></arguments>
- <timeout>20</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure GNUnet" enabled="true">
- <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
- <arguments></arguments>
- <timeout>20</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
-</tasklist>
Deleted: gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc12.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc12.xml 2012-07-30
15:13:58 UTC (rev 22990)
+++ gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc12.xml 2012-07-30
15:23:54 UTC (rev 22991)
@@ -1,441 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
-
- <run id="0" name="check peer">
- <!-- Check if peer is working -->
- <command>sudo date</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>2012</expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
-
-
- <sequence enabled="false">
- <!-- Install dependencies -->
- <run id="1" name="Install dependencies with yum : gcc">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gcc</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : make">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>make</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : autoconf">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>autoconf</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : gettext-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gettext-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : texinfo">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>texinfo</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : libunistring-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libunistring-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : gnutls-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gnutls-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : libgcrypt-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libgcrypt-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : zlib-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>zlib-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : sqlite-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>sqlite-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : postgresql-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>postgresql-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : mysql-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>mysql-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : libgsf-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libgsf-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install dependencies with yum : libvorbis-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libvorbis-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Setup subversion -->
- <run id="1" name="Install dependencies with yum : subversion">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>subversion</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Download GNUnet svn certificate">
- <command>wget --no-check-certificate</command>
-
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
- <timeout>0</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Install GNUnet svn certificate">
- <command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
-
- </sequence>
-
- <sequence enabled="false">
- <!-- Install depencies from source -->
- <sequence enabled="true">
- <!-- Install libtool -->
- <run id="1" name="Download libtool">
- <command>mkdir libtool; cd libtool; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack libtool">
- <command>cd libtool; tar xfvz </command>
- <arguments>libtool-2.4.2.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libtool">
- <command>cd libtool/libtool-2.4.2; ./configure </command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libtool">
- <command>cd libtool/libtool-2.4.2; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="false">
- <!-- Install libcurl -->
- <run id="1" name="Download libcurl">
- <command>mkdir libcurl; cd libcurl; wget </command>
-
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack libcurl">
- <command>cd libcurl; tar -xzvf</command>
- <arguments>curl-7.26.0.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libcurl">
- <command>cd libcurl/curl-7.26.0; ./configure </command>
- <arguments> --with-gnutls</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libcurl">
- <command>cd libcurl/curl-7.26.0; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="false">
- <!-- Install glpk -->
- <run id="1" name="Download glpk">
- <command>mkdir glpk; cd glpk; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack glpk">
- <command>cd glpk; tar -xzvf</command>
- <arguments>glpk-4.47.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure glpk">
- <command>cd glpk/glpk-4.47; ./configure </command>
- <arguments> --with-gnutls</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install glpk">
- <command>cd glpk/glpk-4.47; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- </sequence>
-
- <sequence enabled="false">
- <!-- Install libextractor -->
- <run id="1" name="Download libextractor">
- <command>mkdir libextractor; cd libextractor; wget </command>
-
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Unpack libextractor">
- <command>cd libextractor; tar -xzvf</command>
- <arguments>libextractor-0.6.3.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libextractor">
- <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libextractor">
- <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="false">
- <!-- Install libextractor from svn -->
- <!-- svn is broken atm -->
- <run id="1" name="Download Extractor" >
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/Extractor</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="1" name="Bootstrap Extractor" enabled="true">
- <command>cd Extractor; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure Extractor" enabled="true">
- <command>cd Extractor; ./configure </command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install Extractor">
- <command>cd Extractor; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install libmicrohttpd from svn -->
- <run id="1" name="Download libmicrohttpd" enabled="true">
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/libmicrohttpd</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Bootstrap libmicrohttpd" enabled="true">
- <command>cd libmicrohttpd; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure libmicrohttpd" enabled="true">
- <command>cd libmicrohttpd; ./configure </command>
- <arguments>--with-gnutls=/usr --enable-messages
--enable-curl</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install libmicrohttpd">
- <command>cd libmicrohttpd; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install GNUnet from svn -->
- <run id="1" name="Download GNUnet">
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/gnunet</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Bootstrap GNUnet">
- <command>cd gnunet; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure GNUnet">
- <command>cd gnunet; ./configure </command>
- <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--with-mysql=/usr/lib/mysql --enable-logging=verbose</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Install GNUnet">
- <command>cd gnunet; make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Postinstallation setup -->
- <run id="1" name="Create GNUnet directory" enabled="true">
- <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Set GNUNET_PREFIX" enabled="true">
- <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="1" name="Configure GNUnet" enabled="true">
- <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
-</tasklist>
Deleted: gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-30
15:13:58 UTC (rev 22990)
+++ gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-30
15:23:54 UTC (rev 22991)
@@ -1,619 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
-
- <run id="0" name="check peer">
- <!-- Check if peer is working -->
- <command>sudo date</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>2012</expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
-
- <sequence enabled="true">
- <!-- Install buildtools -->
- <run id="11" name="Install dependencies with yum : gcc">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gcc</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="12" name="Install dependencies with yum : make">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>make</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="13" name="Install dependencies with yum : automake">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>automake</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="14" name="Install dependencies with yum : autoconf">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>autoconf</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="15" name="Install dependencies with yum : gettext-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gettext-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="16" name="Install dependencies with yum : texinfo">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>texinfo</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="17" name="Install dependencies with yum : zlib-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>zlib-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install dependencies -->
- <run id="21" name="Install dependencies with yum : gnutls-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gnutls-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="22" name="Install dependencies with yum : libgcrypt-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libgcrypt-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="23" name="Install dependencies with yum : sqlite-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>sqlite-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="24" name="Install dependencies with yum : postgresql-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>postgresql-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="25" name="Install dependencies with yum : mysql-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>mysql-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="26" name="Install dependencies with yum : libgsf-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libgsf-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="27" name="Install dependencies with yum : libvorbis-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libvorbis-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Setup subversion -->
- <run id="30" name="Install dependencies with yum : subversion">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>subversion</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="31" name="Download GNUnet svn certificate">
- <command>wget --no-check-certificate</command>
-
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
- <timeout>0</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="32" name="Install GNUnet svn certificate">
- <command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence >
- <!-- Install depencies from source -->
- <sequence enabled="true">
- <!-- Install libtool -->
- <run id="41" name="Download libtool">
- <command>mkdir libtool; cd libtool; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="42" name="Unpack libtool">
- <command>cd libtool; tar xfvz </command>
- <arguments>libtool-2.4.2.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="43" name="Configure libtool">
- <command>cd libtool/libtool-2.4.2; ./configure </command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="44" name="Install libtool">
- <command>cd libtool/libtool-2.4.2; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install glpk -->
- <run id="51" name="Download glpk">
- <command>mkdir glpk; cd glpk; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="52" name="Unpack glpk">
- <command>cd glpk; tar -xzvf</command>
- <arguments>glpk-4.47.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="53" name="Configure glpk">
- <command>cd glpk/glpk-4.47; ./configure </command>
- <arguments> --with-gnutls</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="54" name="Install glpk">
- <command>cd glpk/glpk-4.47; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install libgpg-error -->
- <run id="61" name="Download libgpg-error">
- <command>mkdir libgpg-error; cd libgpg-error; wget </command>
-
<arguments>ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="62" name="Unpack libgpg-error">
- <command>cd libgpg-error; tar -xjvf</command>
- <arguments>libgpg-error-1.10.tar.bz2</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="63" name="Configure libgpg-error">
- <command>cd libgpg-error/libgpg-error-1.10; ./configure </command>
- <arguments>--prefix=/usr</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="64" name="Install libgpg-error">
- <command>cd libgpg-error/libgpg-error-1.10; sudo make
install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install libgcrypt -->
- <run id="71" name="Download libgcrypt">
- <command>mkdir libgcrypt; cd libgcrypt; wget </command>
-
<arguments>ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="72" name="Unpack libgcrypt">
- <command>cd libgcrypt; tar -xjvf</command>
- <arguments>libgcrypt-1.5.0.tar.bz2</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="73" name="Configure libgcrypt">
- <command>cd libgcrypt/libgcrypt-1.5.0; ./configure </command>
- <arguments>--prefix=/usr</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="74" name="Install libgcrypt">
- <command>cd libgcrypt/libgcrypt-1.5.0; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install libcurl -->
- <run id="81" name="Download libcurl">
- <command>mkdir libcurl; cd libcurl; wget </command>
-
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="82" name="Unpack libcurl">
- <command>cd libcurl; tar -xzvf</command>
- <arguments>curl-7.26.0.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="83" name="Configure libcurl">
- <command>cd libcurl/curl-7.26.0; ./configure </command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="84" name="Install libcurl">
- <command>cd libcurl/curl-7.26.0; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence enabled="true">
- <!-- Install libunistring -->
- <run id="85" name="Download libunistring">
- <command>mkdir libunistring; cd libunistring; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="86" name="Unpack libunistring">
- <command>cd libunistring; tar -xzvf</command>
- <arguments>libunistring-0.9.3.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="87" name="Configure libunistring">
- <command>cd libunistring/libunistring-0.9.3; ./configure
</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="88" name="Install libunistring">
- <command>cd libunistring/libunistring-0.9.3; sudo make
install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <!-- Return code can be 0 if package was installed and 1 if not -->
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence>
- <run id="91" name="Remove conflicting packages : libgcrypt">
- <command>sudo rpm -e --nodeps</command>
- <arguments>libgcrypt</arguments>
- <timeout>0</timeout>
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <run id="91" name="Remove conflicting packages : libgpg-error">
- <command>sudo rpm -e --nodeps</command>
- <arguments>libgpg-error</arguments>
- <timeout>0</timeout>
- <!-- Return code can be 0 if package was installed and 1 if not -->
- <expected_return_code>-1</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install libextractor -->
- <run id="101" name="Download libextractor">
- <command>mkdir libextractor; cd libextractor; wget </command>
-
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="102" name="Unpack libextractor">
- <command>cd libextractor; tar -xzvf</command>
- <arguments>libextractor-0.6.3.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="103" name="Configure libextractor">
- <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="104" name="Install libextractor">
- <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
-
- <sequence enabled="true">
- <!-- Install libmicrohttpd and dependencies -->
- <run id="111" name="Install dependencies with yum : gmp-devel">
- <!-- Install gmp and gmp devel for libnettle and gnutls
-->
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>gmp-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
- <sequence enabled="true">
- <!-- Install libnettle required for GnuTLS-->
- <run id="112" name="Download libnettle">
- <command>mkdir libnettle; cd libnettle; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="113" name="Unpack libnettle">
- <command>cd libnettle; tar -xzvf</command>
- <arguments>nettle-2.5.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="114" name="Configure libnettle">
- <command>cd libnettle/nettle-2.5; ./configure </command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="115" name="Build libnettle">
- <command>cd libnettle/nettle-2.5; make all</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="116" name="Install libnettle">
- <command>cd libnettle/nettle-2.5; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <!-- Install GnuTLS for MHD -->
- <run id="117" name="Download GnuTLS">
- <command>mkdir gnutls; cd gnutls; wget </command>
-
<arguments>http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="118" name="Unpack gnutls">
- <command>cd gnutls; tar -xvjf</command>
- <arguments>gnutls-2.12.20.tar.bz2</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="119" name="Configure gnutls">
- <command>cd gnutls/gnutls-2.12.20; ./configure</command>
- <arguments>--without-p11-kit</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="120" name="Install gnutls">
- <command>cd gnutls/gnutls-2.12.20; sudo make install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- <sequence >
- <!-- Install libmicrohttpd -->
- <run id="121" name="Download ">
- <command>mkdir libmicrohttpd; cd libmicrohttpd; wget </command>
-
<arguments>ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="122" name="Unpack libmicrohttpd">
- <command>cd libmicrohttpd; tar -xzvf</command>
- <arguments>libmicrohttpd-0.9.21.tar.gz</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="123" name="Configure libmicrohttpd">
- <command>cd libmicrohttpd/libmicrohttpd-0.9.21; ./configure
</command>
- <arguments>--prefix=/usr/local </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="124" name="Install libmicrohttpd">
- <command>cd libmicrohttpd/libmicrohttpd-0.9.21; sudo make
install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- </sequence>
-
- <sequence>
- <!-- Install GNUnet from svn -->
- <run id="131" name="Download GNUnet">
- <command>svn checkout</command>
- <arguments> https://gnunet.org/svn/gnunet</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="132" name="Bootstrap GNUnet" enabled="true">
- <command>cd gnunet; libtoolize; ./bootstrap</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="133" name="Configure GNUnet" enabled="true">
- <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib;
./configure </command>
- <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr/local
--with-curl=/usr/local --with-mysql=/usr/lib/mysql
--enable-logging=verbose</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="134" name="Install GNUnet">
- <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib; make
install</command>
- <arguments> </arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <sequence enabled="true">
- <!-- Postinstallation setup -->
- <run id="141" name="Create GNUnet directory" enabled="true">
- <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="142" name="Set GNUNET_PREFIX" enabled="true">
- <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="143" name="Configure GNUnet" enabled="true">
- <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
- <arguments></arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- </sequence>
- </sequence>
-</tasklist>
Modified: gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment.conf
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment.conf
2012-07-30 15:13:58 UTC (rev 22990)
+++ gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment.conf
2012-07-30 15:23:54 UTC (rev 22991)
@@ -34,6 +34,10 @@
#ssh_keyfile = <keyfile>
ssh_password = <password>
+# protocoll for put get operations (Planetlab does not support SFTP)
+ssh_transfer = scp
+#ssh_transfer = sftp
+
# Use system's SSH "known hosts" file
ssh_use_known_hosts = yes
# Add node hostkeys automatically
Deleted: gnunet-planetlab/gplmt/contrib/sftp_tasks.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/sftp_tasks.xml 2012-07-30 15:13:58 UTC
(rev 22990)
+++ gnunet-planetlab/gplmt/contrib/sftp_tasks.xml 2012-07-30 15:23:54 UTC
(rev 22991)
@@ -1,13 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="remote put/get test task list"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
- <put id="0" name="put testfile">
- <source>/tmp/test.file</source>
- <destination>/tmp/put.file</destination>
- <stop_on_fail>true</stop_on_fail>
- </put>
- <get id="1" name="get testfile">
- <source>/tmp/put.file</source>
- <destination>/tmp/</destination>
- <stop_on_fail>true</stop_on_fail>
- </get>
-</tasklist>
Modified: gnunet-planetlab/gplmt/contrib/simpletasks.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/simpletasks.xml 2012-07-30 15:13:58 UTC
(rev 22990)
+++ gnunet-planetlab/gplmt/contrib/simpletasks.xml 2012-07-30 15:23:54 UTC
(rev 22991)
@@ -5,7 +5,7 @@
<arguments></arguments>
<timeout>10</timeout>
<expected_return_code>0</expected_return_code>
- <expected_output>home</expected_output>
+ <expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
</tasklist>
Deleted: gnunet-planetlab/gplmt/contrib/start_gnunet_fc12.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/start_gnunet_fc12.xml 2012-07-30
15:13:58 UTC (rev 22990)
+++ gnunet-planetlab/gplmt/contrib/start_gnunet_fc12.xml 2012-07-30
15:23:54 UTC (rev 22991)
@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="Start GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
-
- <run id="0" name="check peer">
- <!-- Check if peer is working -->
- <command>sudo date</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output>2012</expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
- <run id="0" name="Start GNUnet">
- <command>gnunet-arm</command>
- <arguments>-d -s</arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>true</stop_on_fail>
- </run>
-
-</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/check_fedora_version.xml (from
rev 22971, gnunet-planetlab/gplmt/contrib/check_fedora_version.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/check_fedora_version.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/check_fedora_version.xml
2012-07-30 15:23:54 UTC (rev 22991)
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Check Fedora version on node"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+
+ <run id="1" name="Check for Fedora 8 ">
+ <command>cat /etc/fedora-release</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>Fedora release 8 (Werewolf)</expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="2" name="Check for Fedora 12 ">
+ <command>cat /etc/fedora-release</command>
+ <arguments>Fedora release 8 (Werewolf)</arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>Fedora release 12 (Constantine)</expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+
+</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet.xml (from rev
22971, gnunet-planetlab/gplmt/contrib/deploy_gnunet.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet.xml 2012-07-30
15:23:54 UTC (rev 22991)
@@ -0,0 +1,457 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+
+ <sequence enabled="false">
+ <!-- Install dependencies -->
+ <run id="1" name="Install dependencies with yum : make">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>make</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gcc">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gcc</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : autoconf">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>autoconf</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : automake">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>automake</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : texinfo">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>texinfo</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : m4">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>m4</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gettext">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>texinfo</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gettext-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gettext-devel</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : zlib-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>zlib-devel</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : sqlite-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>sqlite-devel</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gmp-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gmp-devel</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : glpk glpk-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gmp-devel</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Remove too old packages -->
+ <run id="1" name="Remove outdated packages: libgcrypt">
+ <command>sudo rpm -e --nodeps </command>
+ <arguments>libgcrypt</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Remove outdated packages: libgpg-error-devel">
+ <command>sudo rpm -e --nodeps </command>
+ <arguments>libgpg-error-devel</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Remove outdated packages: libgpg-error">
+ <command>sudo rpm -e --nodeps </command>
+ <arguments>libgpg-error</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Setup subversion -->
+ <run id="1" name="Install dependencies with yum : subversion">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>subversion</arguments>
+ <timeout>60</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Create subversion folders">
+ <command>mkdir ~/.subversion; mkdir ~/.subversion/auth; mkdir
~/.subversion/auth/svn.ssl.server </command>
+ <arguments></arguments>
+ <timeout>60</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <put id="0" name="Copy GNUnet certificate to node">
+ <source>contrib/gnunet-svn-cert</source>
+
<destination>.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</destination>
+ <stop_on_fail>false</stop_on_fail>
+ </put>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install depencies from source -->
+ <sequence enabled="false">
+ <!-- Install libtool -->
+ <run id="1" name="Download libtool">
+ <command>mkdir libtool; cd libtool; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libtool">
+ <command>cd libtool; tar xfvz </command>
+ <arguments>libtool-2.4.2.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libtool">
+ <command>cd libtool/libtool-2.4.2; ./configure </command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libtool">
+ <command>cd libtool/libtool-2.4.2; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>360</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Libtool clean up">
+ <command>sudo rm -rf libtool</command>
+ <arguments> </arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install libcurl -->
+ <run id="1" name="Download libcurl">
+ <command>mkdir libcurl; cd libcurl; wget </command>
+
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libcurl">
+ <command>cd libcurl; tar -xzvf</command>
+ <arguments>curl-7.26.0.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libcurl">
+ <command>cd libcurl/curl-7.26.0; ./configure </command>
+ <arguments> --with-gnutls</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libcurl">
+ <command>cd libcurl/curl-7.26.0; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>480</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install glpk -->
+ <run id="1" name="Download glpk">
+ <command>mkdir glpk; cd glpk; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack glpk">
+ <command>cd glpk; tar -xzvf</command>
+ <arguments>glpk-4.47.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure glpk">
+ <command>cd glpk/glpk-4.47; ./configure </command>
+ <arguments> --with-gnutls</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install glpk">
+ <command>cd glpk/glpk-4.47; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>480</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install libextractor -->
+ <run id="1" name="Download libextractor">
+ <command>mkdir libextractor; cd libunistring; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libextractor">
+ <command>cd libextractor; tar -xzvf</command>
+ <arguments>libextractor-0.6.3.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libextractor">
+ <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>720</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libextractor">
+ <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>720</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install libextractor from svn -->
+ <!-- svn is broken atm -->
+ <run id="1" name="Download Extractor" >
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/Extractor</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap Extractor" enabled="true">
+ <command>cd Extractor; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure Extractor" enabled="true">
+ <command>cd Extractor; ./configure </command>
+ <arguments></arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install Extractor">
+ <command>cd Extractor; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>480</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="false">
+ <!-- Install libmicrohttpd from svn -->
+ <run id="1" name="Download libmicrohttpd" enabled="true">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/libmicrohttpd</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap libmicrohttpd" enabled="true">
+ <command>cd libmicrohttpd; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libmicrohttpd" enabled="true">
+ <command>cd libmicrohttpd; ./configure </command>
+ <arguments>--with-gnutls=/usr --enable-messages
--enable-curl</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libmicrohttpd">
+ <command>cd libmicrohttpd; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>480</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install GNUnet from svn -->
+ <run id="1" name="Download GNUnet" enabled="true">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/gnunet</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap GNUnet" enabled="true">
+ <command>cd gnunet; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure GNUnet" enabled="true">
+ <command>cd gnunet; ./configure </command>
+ <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--enable-logging=verbose</arguments>
+ <timeout>720</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install GNUnet">
+ <command>cd gnunet; make install</command>
+ <arguments> </arguments>
+ <timeout>720</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="false">
+ <!-- Postinstallation setup -->
+ <run id="1" name="Create GNUnet directory" enabled="true">
+ <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
+ <arguments></arguments>
+ <timeout>20</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Set GNUNET_PREFIX" enabled="true">
+ <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>20</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure GNUnet" enabled="true">
+ <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>20</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc12.xml (from
rev 22971, gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc12.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc12.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc12.xml
2012-07-30 15:23:54 UTC (rev 22991)
@@ -0,0 +1,441 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+
+ <sequence enabled="false">
+ <!-- Install dependencies -->
+ <run id="1" name="Install dependencies with yum : gcc">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gcc</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : make">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>make</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : autoconf">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>autoconf</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gettext-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gettext-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : texinfo">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>texinfo</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libunistring-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libunistring-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gnutls-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gnutls-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libgcrypt-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgcrypt-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : zlib-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>zlib-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : sqlite-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>sqlite-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : postgresql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>postgresql-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : mysql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>mysql-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libgsf-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgsf-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libvorbis-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libvorbis-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Setup subversion -->
+ <run id="1" name="Install dependencies with yum : subversion">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>subversion</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Download GNUnet svn certificate">
+ <command>wget --no-check-certificate</command>
+
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install GNUnet svn certificate">
+ <command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install depencies from source -->
+ <sequence enabled="true">
+ <!-- Install libtool -->
+ <run id="1" name="Download libtool">
+ <command>mkdir libtool; cd libtool; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libtool">
+ <command>cd libtool; tar xfvz </command>
+ <arguments>libtool-2.4.2.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libtool">
+ <command>cd libtool/libtool-2.4.2; ./configure </command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libtool">
+ <command>cd libtool/libtool-2.4.2; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install libcurl -->
+ <run id="1" name="Download libcurl">
+ <command>mkdir libcurl; cd libcurl; wget </command>
+
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libcurl">
+ <command>cd libcurl; tar -xzvf</command>
+ <arguments>curl-7.26.0.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libcurl">
+ <command>cd libcurl/curl-7.26.0; ./configure </command>
+ <arguments> --with-gnutls</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libcurl">
+ <command>cd libcurl/curl-7.26.0; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="false">
+ <!-- Install glpk -->
+ <run id="1" name="Download glpk">
+ <command>mkdir glpk; cd glpk; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack glpk">
+ <command>cd glpk; tar -xzvf</command>
+ <arguments>glpk-4.47.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure glpk">
+ <command>cd glpk/glpk-4.47; ./configure </command>
+ <arguments> --with-gnutls</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install glpk">
+ <command>cd glpk/glpk-4.47; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install libextractor -->
+ <run id="1" name="Download libextractor">
+ <command>mkdir libextractor; cd libextractor; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libextractor">
+ <command>cd libextractor; tar -xzvf</command>
+ <arguments>libextractor-0.6.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libextractor">
+ <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libextractor">
+ <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install libextractor from svn -->
+ <!-- svn is broken atm -->
+ <run id="1" name="Download Extractor" >
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/Extractor</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap Extractor" enabled="true">
+ <command>cd Extractor; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure Extractor" enabled="true">
+ <command>cd Extractor; ./configure </command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install Extractor">
+ <command>cd Extractor; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libmicrohttpd from svn -->
+ <run id="1" name="Download libmicrohttpd" enabled="true">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/libmicrohttpd</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap libmicrohttpd" enabled="true">
+ <command>cd libmicrohttpd; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libmicrohttpd" enabled="true">
+ <command>cd libmicrohttpd; ./configure </command>
+ <arguments>--with-gnutls=/usr --enable-messages
--enable-curl</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libmicrohttpd">
+ <command>cd libmicrohttpd; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install GNUnet from svn -->
+ <run id="1" name="Download GNUnet">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/gnunet</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap GNUnet">
+ <command>cd gnunet; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure GNUnet">
+ <command>cd gnunet; ./configure </command>
+ <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--with-mysql=/usr/lib/mysql --enable-logging=verbose</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install GNUnet">
+ <command>cd gnunet; make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Postinstallation setup -->
+ <run id="1" name="Create GNUnet directory" enabled="true">
+ <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Set GNUNET_PREFIX" enabled="true">
+ <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure GNUnet" enabled="true">
+ <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc8.xml (from
rev 22983, gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc8.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/deploy_gnunet_fc8.xml
2012-07-30 15:23:54 UTC (rev 22991)
@@ -0,0 +1,619 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+ <sequence enabled="true">
+ <!-- Install buildtools -->
+ <run id="11" name="Install dependencies with yum : gcc">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gcc</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="12" name="Install dependencies with yum : make">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>make</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="13" name="Install dependencies with yum : automake">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>automake</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="14" name="Install dependencies with yum : autoconf">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>autoconf</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="15" name="Install dependencies with yum : gettext-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gettext-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="16" name="Install dependencies with yum : texinfo">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>texinfo</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="17" name="Install dependencies with yum : zlib-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>zlib-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install dependencies -->
+ <run id="21" name="Install dependencies with yum : gnutls-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gnutls-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="22" name="Install dependencies with yum : libgcrypt-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgcrypt-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="23" name="Install dependencies with yum : sqlite-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>sqlite-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="24" name="Install dependencies with yum : postgresql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>postgresql-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="25" name="Install dependencies with yum : mysql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>mysql-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="26" name="Install dependencies with yum : libgsf-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgsf-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="27" name="Install dependencies with yum : libvorbis-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libvorbis-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Setup subversion -->
+ <run id="30" name="Install dependencies with yum : subversion">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>subversion</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="31" name="Download GNUnet svn certificate">
+ <command>wget --no-check-certificate</command>
+
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="32" name="Install GNUnet svn certificate">
+ <command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence >
+ <!-- Install depencies from source -->
+ <sequence enabled="true">
+ <!-- Install libtool -->
+ <run id="41" name="Download libtool">
+ <command>mkdir libtool; cd libtool; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="42" name="Unpack libtool">
+ <command>cd libtool; tar xfvz </command>
+ <arguments>libtool-2.4.2.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="43" name="Configure libtool">
+ <command>cd libtool/libtool-2.4.2; ./configure </command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="44" name="Install libtool">
+ <command>cd libtool/libtool-2.4.2; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install glpk -->
+ <run id="51" name="Download glpk">
+ <command>mkdir glpk; cd glpk; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="52" name="Unpack glpk">
+ <command>cd glpk; tar -xzvf</command>
+ <arguments>glpk-4.47.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="53" name="Configure glpk">
+ <command>cd glpk/glpk-4.47; ./configure </command>
+ <arguments> --with-gnutls</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="54" name="Install glpk">
+ <command>cd glpk/glpk-4.47; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libgpg-error -->
+ <run id="61" name="Download libgpg-error">
+ <command>mkdir libgpg-error; cd libgpg-error; wget </command>
+
<arguments>ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="62" name="Unpack libgpg-error">
+ <command>cd libgpg-error; tar -xjvf</command>
+ <arguments>libgpg-error-1.10.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="63" name="Configure libgpg-error">
+ <command>cd libgpg-error/libgpg-error-1.10; ./configure </command>
+ <arguments>--prefix=/usr</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="64" name="Install libgpg-error">
+ <command>cd libgpg-error/libgpg-error-1.10; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libgcrypt -->
+ <run id="71" name="Download libgcrypt">
+ <command>mkdir libgcrypt; cd libgcrypt; wget </command>
+
<arguments>ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="72" name="Unpack libgcrypt">
+ <command>cd libgcrypt; tar -xjvf</command>
+ <arguments>libgcrypt-1.5.0.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="73" name="Configure libgcrypt">
+ <command>cd libgcrypt/libgcrypt-1.5.0; ./configure </command>
+ <arguments>--prefix=/usr</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="74" name="Install libgcrypt">
+ <command>cd libgcrypt/libgcrypt-1.5.0; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libcurl -->
+ <run id="81" name="Download libcurl">
+ <command>mkdir libcurl; cd libcurl; wget </command>
+
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="82" name="Unpack libcurl">
+ <command>cd libcurl; tar -xzvf</command>
+ <arguments>curl-7.26.0.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="83" name="Configure libcurl">
+ <command>cd libcurl/curl-7.26.0; ./configure </command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="84" name="Install libcurl">
+ <command>cd libcurl/curl-7.26.0; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libunistring -->
+ <run id="85" name="Download libunistring">
+ <command>mkdir libunistring; cd libunistring; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="86" name="Unpack libunistring">
+ <command>cd libunistring; tar -xzvf</command>
+ <arguments>libunistring-0.9.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="87" name="Configure libunistring">
+ <command>cd libunistring/libunistring-0.9.3; ./configure
</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="88" name="Install libunistring">
+ <command>cd libunistring/libunistring-0.9.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <!-- Return code can be 0 if package was installed and 1 if not -->
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence>
+ <run id="91" name="Remove conflicting packages : libgcrypt">
+ <command>sudo rpm -e --nodeps</command>
+ <arguments>libgcrypt</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="91" name="Remove conflicting packages : libgpg-error">
+ <command>sudo rpm -e --nodeps</command>
+ <arguments>libgpg-error</arguments>
+ <timeout>0</timeout>
+ <!-- Return code can be 0 if package was installed and 1 if not -->
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install libextractor -->
+ <run id="101" name="Download libextractor">
+ <command>mkdir libextractor; cd libextractor; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="102" name="Unpack libextractor">
+ <command>cd libextractor; tar -xzvf</command>
+ <arguments>libextractor-0.6.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="103" name="Configure libextractor">
+ <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="104" name="Install libextractor">
+ <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install libmicrohttpd and dependencies -->
+ <run id="111" name="Install dependencies with yum : gmp-devel">
+ <!-- Install gmp and gmp devel for libnettle and gnutls
-->
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gmp-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <sequence enabled="true">
+ <!-- Install libnettle required for GnuTLS-->
+ <run id="112" name="Download libnettle">
+ <command>mkdir libnettle; cd libnettle; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="113" name="Unpack libnettle">
+ <command>cd libnettle; tar -xzvf</command>
+ <arguments>nettle-2.5.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="114" name="Configure libnettle">
+ <command>cd libnettle/nettle-2.5; ./configure </command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="115" name="Build libnettle">
+ <command>cd libnettle/nettle-2.5; make all</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="116" name="Install libnettle">
+ <command>cd libnettle/nettle-2.5; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <!-- Install GnuTLS for MHD -->
+ <run id="117" name="Download GnuTLS">
+ <command>mkdir gnutls; cd gnutls; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="118" name="Unpack gnutls">
+ <command>cd gnutls; tar -xvjf</command>
+ <arguments>gnutls-2.12.20.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="119" name="Configure gnutls">
+ <command>cd gnutls/gnutls-2.12.20; ./configure</command>
+ <arguments>--without-p11-kit</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="120" name="Install gnutls">
+ <command>cd gnutls/gnutls-2.12.20; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence >
+ <!-- Install libmicrohttpd -->
+ <run id="121" name="Download ">
+ <command>mkdir libmicrohttpd; cd libmicrohttpd; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="122" name="Unpack libmicrohttpd">
+ <command>cd libmicrohttpd; tar -xzvf</command>
+ <arguments>libmicrohttpd-0.9.21.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="123" name="Configure libmicrohttpd">
+ <command>cd libmicrohttpd/libmicrohttpd-0.9.21; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="124" name="Install libmicrohttpd">
+ <command>cd libmicrohttpd/libmicrohttpd-0.9.21; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ </sequence>
+
+ <sequence>
+ <!-- Install GNUnet from svn -->
+ <run id="131" name="Download GNUnet">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/gnunet</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="132" name="Bootstrap GNUnet" enabled="true">
+ <command>cd gnunet; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="133" name="Configure GNUnet" enabled="true">
+ <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib;
./configure </command>
+ <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr/local
--with-curl=/usr/local --with-mysql=/usr/lib/mysql
--enable-logging=verbose</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="134" name="Install GNUnet">
+ <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib; make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <sequence enabled="true">
+ <!-- Postinstallation setup -->
+ <run id="141" name="Create GNUnet directory" enabled="true">
+ <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="142" name="Set GNUNET_PREFIX" enabled="true">
+ <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="143" name="Configure GNUnet" enabled="true">
+ <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ </sequence>
+</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/start_gnunet_fc12.xml (from
rev 22971, gnunet-planetlab/gplmt/contrib/start_gnunet_fc12.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/start_gnunet_fc12.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/start_gnunet_fc12.xml
2012-07-30 15:23:54 UTC (rev 22991)
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Start GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="0" name="Start GNUnet">
+ <command>gnunet-arm</command>
+ <arguments>-d -s</arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+</tasklist>
Added: gnunet-planetlab/gplmt/contrib/tasklists/stop_gnunet_fc12.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/stop_gnunet_fc12.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/stop_gnunet_fc12.xml
2012-07-30 15:23:54 UTC (rev 22991)
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Start GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="0" name="Start GNUnet">
+ <command>gnunet-arm</command>
+ <arguments> -d -e</arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/test_sftp_tasks.xml (from rev
22986, gnunet-planetlab/gplmt/contrib/sftp_tasks.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/test_sftp_tasks.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/test_sftp_tasks.xml
2012-07-30 15:23:54 UTC (rev 22991)
@@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="remote put/get test task list"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+ <put id="0" name="put testfile">
+ <source>/tmp/test.file</source>
+ <destination>/tmp/put.file</destination>
+ <stop_on_fail>true</stop_on_fail>
+ </put>
+ <get id="1" name="get testfile">
+ <source>/tmp/put.file</source>
+ <destination>/tmp/</destination>
+ <stop_on_fail>true</stop_on_fail>
+ </get>
+</tasklist>
Copied: gnunet-planetlab/gplmt/contrib/tasklists/test_tasks.xml (from rev
22971, gnunet-planetlab/gplmt/contrib/tasks.xml)
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasklists/test_tasks.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/tasklists/test_tasks.xml 2012-07-30
15:23:54 UTC (rev 22991)
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Tasklist example"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+ <task>
+ <id>0</id>
+ <name>run 1</name>
+ <type>run</type>
+ <command>ls</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>0</stop_on_fail>
+ </task>
+ <parallel>
+ <task>
+ <id>1</id>
+ <name>run p2a</name>
+ <type>run</type>
+ <command>date</command>
+ <arguments></arguments>
+ <timeout>30</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>0</stop_on_fail>
+ </task>
+ <task>
+ <id>2</id>
+ <name>run p2b</name>
+ <type>run</type>
+ <command>ls</command>
+ <arguments></arguments>
+ <timeout>30</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>0</stop_on_fail>
+ </task>
+ </parallel>
+ <sequence>
+ <task>
+ <id>3</id>
+ <name>run 3</name>
+ <type>run</type>
+ <command>date</command>
+ <arguments></arguments>
+ <timeout>30</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>0</stop_on_fail>
+ </task>
+ <task>
+ <id>4</id>
+ <name>run 4</name>
+ <type>run</type>
+ <command>date</command>
+ <arguments></arguments>
+ <timeout>30</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>0</stop_on_fail>
+ </task>
+ </sequence>
+</tasklist>
Deleted: gnunet-planetlab/gplmt/contrib/tasks.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/tasks.xml 2012-07-30 15:13:58 UTC (rev
22990)
+++ gnunet-planetlab/gplmt/contrib/tasks.xml 2012-07-30 15:23:54 UTC (rev
22991)
@@ -1,62 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<tasklist name="Tasklist example"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
- <task>
- <id>0</id>
- <name>run 1</name>
- <type>run</type>
- <command>ls</command>
- <arguments></arguments>
- <timeout>10</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>0</stop_on_fail>
- </task>
- <parallel>
- <task>
- <id>1</id>
- <name>run p2a</name>
- <type>run</type>
- <command>date</command>
- <arguments></arguments>
- <timeout>30</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>0</stop_on_fail>
- </task>
- <task>
- <id>2</id>
- <name>run p2b</name>
- <type>run</type>
- <command>ls</command>
- <arguments></arguments>
- <timeout>30</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>0</stop_on_fail>
- </task>
- </parallel>
- <sequence>
- <task>
- <id>3</id>
- <name>run 3</name>
- <type>run</type>
- <command>date</command>
- <arguments></arguments>
- <timeout>30</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>0</stop_on_fail>
- </task>
- <task>
- <id>4</id>
- <name>run 4</name>
- <type>run</type>
- <command>date</command>
- <arguments></arguments>
- <timeout>30</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>0</stop_on_fail>
- </task>
- </sequence>
-</tasklist>
Modified: gnunet-planetlab/gplmt/contrib/test.conf
===================================================================
--- gnunet-planetlab/gplmt/contrib/test.conf 2012-07-30 15:13:58 UTC (rev
22990)
+++ gnunet-planetlab/gplmt/contrib/test.conf 2012-07-30 15:23:54 UTC (rev
22991)
@@ -1,6 +1,6 @@
[gplmt]
-#nodes = contrib/localhost.nodes
-nodes = contrib/current.nodes
+nodes = contrib/localhost.nodes
+nodes = contrib/test_node.nodes
#tasks = contrib/tasks.xml
tasks = contrib/simpletasks.xml
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r22991 - in gnunet-planetlab/gplmt/contrib: . tasklists,
gnunet <=