|
| From: | gnunet |
| Subject: | [GNUnet-SVN] r25073 - in gnunet-update: . gnunet-ext |
| Date: | Wed, 21 Nov 2012 09:19:39 +0100 |
Author: harsha
Date: 2012-11-21 09:19:39 +0100 (Wed, 21 Nov 2012)
New Revision: 25073
Added:
gnunet-update/ABOUT-NLS
gnunet-update/INSTALL
gnunet-update/bootstrap
gnunet-update/configure.ac
gnunet-update/gnunet-ext/
gnunet-update/m4/
gnunet-update/po/
gnunet-update/src/
Removed:
gnunet-update/INSTALL
gnunet-update/gnunet-ext/ABOUT-NLS
gnunet-update/gnunet-ext/INSTALL
gnunet-update/gnunet-ext/bootstrap
gnunet-update/gnunet-ext/configure.ac
gnunet-update/gnunet-ext/m4/
gnunet-update/gnunet-ext/po/
gnunet-update/gnunet-ext/src/
Log:
added gnunet-ext
Copied: gnunet-update/ABOUT-NLS (from rev 25072, gnunet-ext/ABOUT-NLS)
===================================================================
--- gnunet-update/ABOUT-NLS (rev 0)
+++ gnunet-update/ABOUT-NLS 2012-11-21 08:19:39 UTC (rev 25073)
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. Installers may use special
+options at configuration time for changing the default behaviour. The
+command:
+
+ ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it. If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to address@hidden', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to address@hidden' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of June
+2010. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am an ar as ast az be address@hidden bg bn_IN bs
ca
+ +--------------------------------------------------+
+ a2ps | [] [] |
+ aegis | |
+ ant-phone | |
+ anubis | |
+ aspell | [] [] |
+ bash | |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | |
+ bison-runtime | [] |
+ bluez-pin | [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] |
+ cryptsetup | |
+ dfarc | |
+ dialog | [] [] |
+ dico | |
+ diffutils | [] |
+ dink | |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ exif | |
+ fetchmail | [] |
+ findutils | [] |
+ flex | [] |
+ freedink | |
+ gas | |
+ gawk | [] [] |
+ gcal | [] |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gjay | |
+ gliv | [] |
+ glunarclock | [] [] |
+ gnubiff | |
+ gnucash | [] |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gold | |
+ gpe-aerial | |
+ gpe-beam | |
+ gpe-bluetooth | |
+ gpe-calendar | |
+ gpe-clock | [] |
+ gpe-conf | |
+ gpe-contacts | |
+ gpe-edit | |
+ gpe-filemanager | |
+ gpe-go | |
+ gpe-login | |
+ gpe-ownerinfo | [] |
+ gpe-package | |
+ gpe-sketchbook | |
+ gpe-su | [] |
+ gpe-taskmanager | [] |
+ gpe-timesheet | [] |
+ gpe-today | [] |
+ gpe-todo | |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | [] [] |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] [] [] |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] |
+ gutenprint | |
+ hello | [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | |
+ iso_639 | [] [] [] [] |
+ iso_639_3 | |
+ jwhois | |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] |
+ libc | [] [] |
+ libexif | () |
+ libextractor | |
+ libgnutls | |
+ libgpewidget | |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | [] |
+ libidn | |
+ lifelines | |
+ liferea | [] [] |
+ lilypond | |
+ linkdr | [] |
+ lordsawar | |
+ lprng | |
+ lynx | [] |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | |
+ man-db | |
+ man-db-manpages | |
+ minicom | |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | |
+ psmisc | |
+ pspp | [] |
+ pwdutils | |
+ radius | [] |
+ recode | [] [] |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | |
+ tar | [] |
+ texinfo | |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] |
+ +--------------------------------------------------+
+ af am an ar as ast az be address@hidden bg bn_IN bs
ca
+ 6 0 1 2 3 19 1 10 3 28 3 1 38
+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ +-------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] () |
+ anubis | [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] [] |
+ bfd | [] |
+ bibshelf | [] [] [] |
+ binutils | [] |
+ bison | [] [] |
+ bison-runtime | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] [] [] |
+ cflow | [] [] |
+ clisp | [] [] [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] [] [] |
+ cryptsetup | [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] |
+ dink | [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ exif | () [] [] |
+ fetchmail | [] [] () [] [] [] |
+ findutils | [] [] [] |
+ flex | [] [] |
+ freedink | [] [] [] |
+ gas | [] |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gip | [] [] [] [] |
+ gjay | [] |
+ gliv | [] [] [] |
+ glunarclock | [] [] |
+ gnubiff | () |
+ gnucash | [] () () () () |
+ gnuedu | [] [] |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] |
+ gpe-aerial | [] [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] [] [] |
+ gpe-edit | [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] () [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] |
+ grub | [] [] |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] () [] |
+ gtkam | [] [] () [] [] |
+ gtkorphan | [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] |
+ hello | [] [] [] [] |
+ help2man | [] |
+ hylafax | [] [] |
+ idutils | [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] [] [] [] () [] [] [] () |
+ iso_3166_2 | () |
+ iso_4217 | [] [] [] () [] [] |
+ iso_639 | [] [] [] [] () [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] [] [] [] |
+ latrine | [] () |
+ ld | [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] () |
+ libgphoto2_port | [] () [] |
+ libgsasl | |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ liferea | [] [] [] [] [] |
+ lilypond | [] [] [] |
+ linkdr | [] [] [] |
+ lordsawar | [] |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] [] [] [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] |
+ pies | |
+ popt | [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] |
+ pwdutils | [] |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rosegarden | () () () |
+ rpm | [] [] [] |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] |
+ sed | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | |
+ skencil | [] () [] |
+ solfege | [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ sysstat | [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] |
+ vice | () () |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] [] |
+ +-------------------------------------------------+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ 5 64 105 117 18 1 8 0 28 89 18 19 0
+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ +----------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] [] |
+ aspell | [] [] [] [] |
+ bash | [] [] [] [] |
+ bfd | [] [] [] |
+ bibshelf | [] [] [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] |
+ bison-runtime | [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] |
+ cflow | [] [] [] |
+ clisp | [] |
+ coreutils | [] [] [] [] [] |
+ cpio | [] [] [] [] |
+ cppi | [] [] |
+ cpplib | [] [] [] |
+ cryptsetup | [] [] [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ dink | [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] |
+ freedink | [] [] [] |
+ gas | [] [] |
+ gawk | [] [] [] [] () [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] [] [] |
+ gjay | [] |
+ gliv | [] () |
+ glunarclock | [] [] [] [] |
+ gnubiff | () [] () |
+ gnucash | () () () () () [] |
+ gnuedu | [] [] |
+ gnulib | [] [] [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] [] |
+ gpe-aerial | [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] [] [] |
+ gpe-calendar | [] [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] [] [] |
+ gpe-contacts | [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] [] |
+ gpe-go | [] [] [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] [] |
+ grub | [] [] [] [] |
+ gsasl | [] [] [] [] [] |
+ gss | [] [] [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] [] [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] [] |
+ hello | [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | () [] [] [] |
+ iso_4217 | [] () [] [] [] [] |
+ iso_639 | [] () [] [] [] [] [] [] [] |
+ iso_639_3 | () [] [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] [] [] [] |
+ keytouch-editor | [] [] [] [] [] |
+ keytouch-keyboa... | [] [] [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] [] () |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] [] |
+ libidn | [] [] [] [] |
+ lifelines | () |
+ liferea | [] [] [] [] |
+ lilypond | [] [] |
+ linkdr | [] [] [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] [] [] |
+ m4 | [] [] [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] [] |
+ man-db | [] [] |
+ man-db-manpages | [] |
+ minicom | [] [] [] [] [] |
+ mkisofs | [] [] [] [] |
+ myserver | |
+ nano | [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] [] |
+ pies | |
+ popt | [] [] [] [] [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | |
+ pwdutils | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () () () () |
+ rpm | [] [] |
+ rush | |
+ sarg | [] |
+ screem | [] [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] |
+ sp | [] () |
+ sysstat | [] [] [] [] [] |
+ tar | [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux-ng | [] [] [] [] [] [] |
+ vice | () () () |
+ vmm | [] |
+ vorbis-tools | [] |
+ wastesedge | () () |
+ wdiff | [] |
+ wget | [] [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] |
+ +----------------------------------------------------+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ +-----------------------------------------------+
+ a2ps | [] |
+ aegis | |
+ ant-phone | |
+ anubis | [] [] |
+ aspell | [] |
+ bash | |
+ bfd | |
+ bibshelf | [] [] |
+ binutils | |
+ bison | [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] |
+ cpio | |
+ cppi | |
+ cpplib | |
+ cryptsetup | |
+ dfarc | [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] |
+ dink | |
+ doodle | |
+ e2fsprogs | |
+ enscript | |
+ exif | [] |
+ fetchmail | |
+ findutils | |
+ flex | |
+ freedink | [] |
+ gas | |
+ gawk | |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] |
+ gettext-tools | [] |
+ gip | [] [] |
+ gjay | |
+ gliv | |
+ glunarclock | [] |
+ gnubiff | |
+ gnucash | () () () () |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gold | |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] |
+ gpe-timesheet | [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] [] [] |
+ gstreamer | |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | |
+ hello | [] [] [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | |
+ iso_15924 | [] [] |
+ iso_3166 | [] [] () [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] |
+ iso_639 | [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] [] |
+ libc | [] |
+ libexif | |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | |
+ libidn | |
+ lifelines | |
+ liferea | |
+ lilypond | |
+ linkdr | |
+ lordsawar | |
+ lprng | |
+ lynx | |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | [] [] [] |
+ psmisc | |
+ pspp | |
+ pwdutils | |
+ radius | |
+ recode | |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] |
+ sed | |
+ sharutils | |
+ shishi | |
+ skencil | |
+ solfege | [] |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | [] |
+ tar | [] |
+ texinfo | [] |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] |
+ wyslij-po | |
+ xchat | [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +-----------------------------------------------+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] |
+ bfd | [] |
+ bibshelf | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] () |
+ buzztard | [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cppi | [] |
+ cpplib | [] |
+ cryptsetup | [] |
+ dfarc | [] |
+ dialog | [] [] [] [] |
+ dico | [] |
+ diffutils | [] [] [] [] [] [] |
+ dink | () |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ exif | [] [] [] () [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ freedink | [] [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] |
+ gip | [] [] [] [] [] |
+ gjay | |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] |
+ gnubiff | [] () |
+ gnucash | [] () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] [] |
+ gold | |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ grub | [] [] [] |
+ gsasl | [] [] [] [] |
+ gss | [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] |
+ hello | [] [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] [] [] [] |
+ iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] [] [] |
+ iso_4217 | [] [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] [] [] |
+ iso_639_3 | [] [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] [] [] |
+ keytouch-keyboa... | [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] |
+ ld | |
+ leafpad | [] [] [] [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] |
+ lifelines | [] [] |
+ liferea | [] [] [] [] [] () () [] |
+ lilypond | [] |
+ linkdr | [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] |
+ man-db-manpages | [] [] [] |
+ minicom | [] [] [] [] |
+ mkisofs | [] [] [] |
+ myserver | |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] |
+ pies | [] |
+ popt | [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] [] |
+ pwdutils | [] |
+ radius | [] [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () |
+ rpm | [] [] [] |
+ rush | [] [] |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] [] |
+ soundtracker | [] |
+ sp | |
+ sysstat | [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] [] |
+ vice | [] |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +---------------------------------------------------+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
+
+ sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] |
27
+ aegis | [] |
9
+ ant-phone | [] [] [] [] |
9
+ anubis | [] [] [] [] |
15
+ aspell | [] [] [] |
20
+ bash | [] [] [] |
12
+ bfd | [] |
6
+ bibshelf | [] [] [] |
16
+ binutils | [] [] |
8
+ bison | [] [] |
12
+ bison-runtime | [] [] [] [] [] [] |
29
+ bluez-pin | [] [] [] [] [] [] [] [] |
37
+ bombono-dvd | [] |
4
+ buzztard | [] |
7
+ cflow | [] [] [] |
9
+ clisp | |
10
+ coreutils | [] [] [] [] |
22
+ cpio | [] [] [] [] [] [] |
13
+ cppi | [] [] |
5
+ cpplib | [] [] [] [] [] [] |
14
+ cryptsetup | [] [] |
7
+ dfarc | [] |
9
+ dialog | [] [] [] [] [] [] [] |
30
+ dico | [] |
2
+ diffutils | [] [] [] [] [] [] |
30
+ dink | |
4
+ doodle | [] [] |
7
+ e2fsprogs | [] [] [] |
11
+ enscript | [] [] [] [] |
17
+ exif | [] [] [] |
16
+ fetchmail | [] [] [] |
17
+ findutils | [] [] [] [] [] |
20
+ flex | [] [] [] [] |
15
+ freedink | [] |
10
+ gas | [] |
4
+ gawk | [] [] [] [] |
18
+ gcal | [] [] |
5
+ gcc | [] [] [] |
7
+ gettext-examples | [] [] [] [] [] [] [] |
34
+ gettext-runtime | [] [] [] [] [] [] [] |
29
+ gettext-tools | [] [] [] [] [] [] |
22
+ gip | [] [] [] [] |
22
+ gjay | [] |
3
+ gliv | [] [] [] |
14
+ glunarclock | [] [] [] [] [] |
19
+ gnubiff | [] [] |
4
+ gnucash | () [] () [] () |
10
+ gnuedu | [] [] |
7
+ gnulib | [] [] [] [] |
16
+ gnunet | [] |
1
+ gnunet-gtk | [] [] [] |
5
+ gnutls | [] [] [] |
10
+ gold | [] |
4
+ gpe-aerial | [] [] [] |
18
+ gpe-beam | [] [] [] |
19
+ gpe-bluetooth | [] [] [] |
13
+ gpe-calendar | [] [] [] [] |
12
+ gpe-clock | [] [] [] [] [] |
28
+ gpe-conf | [] [] [] [] |
20
+ gpe-contacts | [] [] [] |
17
+ gpe-edit | [] [] [] |
12
+ gpe-filemanager | [] [] [] [] |
16
+ gpe-go | [] [] [] [] [] |
25
+ gpe-login | [] [] [] |
11
+ gpe-ownerinfo | [] [] [] [] [] |
25
+ gpe-package | [] [] [] |
13
+ gpe-sketchbook | [] [] [] |
20
+ gpe-su | [] [] [] [] [] |
30
+ gpe-taskmanager | [] [] [] [] [] |
29
+ gpe-timesheet | [] [] [] [] [] |
25
+ gpe-today | [] [] [] [] [] [] |
30
+ gpe-todo | [] [] [] [] |
17
+ gphoto2 | [] [] [] [] [] |
24
+ gprof | [] [] [] |
15
+ gpsdrive | [] [] [] |
11
+ gramadoir | [] [] [] |
11
+ grep | [] [] [] |
10
+ grub | [] [] [] |
14
+ gsasl | [] [] [] [] |
14
+ gss | [] [] [] |
11
+ gst-plugins-bad | [] [] [] [] |
26
+ gst-plugins-base | [] [] [] [] [] |
24
+ gst-plugins-good | [] [] [] [] |
24
+ gst-plugins-ugly | [] [] [] [] [] |
29
+ gstreamer | [] [] [] [] |
22
+ gtick | [] [] [] |
13
+ gtkam | [] [] [] |
20
+ gtkorphan | [] [] [] |
14
+ gtkspell | [] [] [] [] [] [] [] [] [] |
45
+ gutenprint | [] |
10
+ hello | [] [] [] [] [] [] |
21
+ help2man | [] [] |
7
+ hylafax | [] |
5
+ idutils | [] [] [] [] |
17
+ indent | [] [] [] [] [] [] |
30
+ iso_15924 | () [] () [] [] |
16
+ iso_3166 | [] [] () [] [] () [] [] [] () |
53
+ iso_3166_2 | () [] () [] |
9
+ iso_4217 | [] () [] [] () [] [] |
26
+ iso_639 | [] [] [] () [] () [] [] [] [] |
38
+ iso_639_3 | [] () |
8
+ jwhois | [] [] [] [] [] |
16
+ kbd | [] [] [] [] [] |
15
+ keytouch | [] [] [] |
16
+ keytouch-editor | [] [] [] |
14
+ keytouch-keyboa... | [] [] [] |
14
+ klavaro | [] |
11
+ latrine | [] [] [] |
10
+ ld | [] [] [] [] |
11
+ leafpad | [] [] [] [] [] [] |
33
+ libc | [] [] [] [] [] |
21
+ libexif | [] () |
7
+ libextractor | [] |
1
+ libgnutls | [] [] [] |
9
+ libgpewidget | [] [] [] |
14
+ libgpg-error | [] [] [] |
9
+ libgphoto2 | [] [] |
8
+ libgphoto2_port | [] [] [] [] |
14
+ libgsasl | [] [] [] |
13
+ libiconv | [] [] [] [] |
21
+ libidn | () [] [] |
11
+ lifelines | [] |
4
+ liferea | [] [] [] |
21
+ lilypond | [] |
7
+ linkdr | [] [] [] [] [] |
17
+ lordsawar | |
1
+ lprng | [] |
3
+ lynx | [] [] [] [] |
17
+ m4 | [] [] [] [] |
19
+ mailfromd | [] [] |
3
+ mailutils | [] |
5
+ make | [] [] [] [] |
21
+ man-db | [] [] [] |
8
+ man-db-manpages | |
4
+ minicom | [] [] |
16
+ mkisofs | [] [] |
9
+ myserver | | 0
+ nano | [] [] [] [] |
21
+ opcodes | [] [] [] |
11
+ parted | [] [] [] [] [] |
15
+ pies | [] [] |
3
+ popt | [] [] [] [] [] [] |
27
+ psmisc | [] [] |
11
+ pspp | |
4
+ pwdutils | [] [] |
6
+ radius | [] [] |
9
+ recode | [] [] [] [] |
28
+ rosegarden | () | 0
+ rpm | [] [] [] |
11
+ rush | [] [] |
4
+ sarg | |
1
+ screem | [] |
3
+ scrollkeeper | [] [] [] [] [] |
27
+ sed | [] [] [] [] [] |
30
+ sharutils | [] [] [] [] [] |
22
+ shishi | [] |
3
+ skencil | [] [] |
7
+ solfege | [] [] [] [] |
16
+ solfege-manual | [] |
8
+ soundtracker | [] [] [] |
9
+ sp | [] |
3
+ sysstat | [] [] |
15
+ tar | [] [] [] [] [] [] |
23
+ texinfo | [] [] [] [] [] |
17
+ tin | |
4
+ unicode-han-tra... | | 0
+ unicode-transla... | |
2
+ util-linux-ng | [] [] [] [] |
20
+ vice | () () |
1
+ vmm | [] |
4
+ vorbis-tools | [] |
6
+ wastesedge | |
2
+ wdiff | [] [] |
7
+ wget | [] [] [] [] [] |
26
+ wyslij-po | [] [] |
8
+ xchat | [] [] [] [] [] [] |
36
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] |
63
+ xkeyboard-config | [] [] [] |
22
+ +---------------------------------------------------+
+ 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41
2618
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
address@hidden' to make the `.pot' files available
+to the translation teams.
+
Deleted: gnunet-update/INSTALL
===================================================================
Copied: gnunet-update/INSTALL (from rev 25072, gnunet-ext/INSTALL)
===================================================================
--- gnunet-update/INSTALL (rev 0)
+++ gnunet-update/INSTALL 2012-11-21 08:19:39 UTC (rev 25073)
@@ -0,0 +1,365 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
Copied: gnunet-update/bootstrap (from rev 25072, gnunet-ext/bootstrap)
===================================================================
--- gnunet-update/bootstrap (rev 0)
+++ gnunet-update/bootstrap 2012-11-21 08:19:39 UTC (rev 25073)
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+libtoolize --automake --copy --force
+aclocal -I m4
+autoheader
+autoconf
+automake --add-missing --copy
+
Copied: gnunet-update/configure.ac (from rev 25072, gnunet-ext/configure.ac)
===================================================================
--- gnunet-update/configure.ac (rev 0)
+++ gnunet-update/configure.ac 2012-11-21 08:19:39 UTC (rev 25073)
@@ -0,0 +1,191 @@
+# This file is part of GNUnet.
+# (C) 2001-2011 Christian Grothoff (and other contributing authors)
+#
+# GNUnet is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published
+# by the Free Software Foundation; either version 2, or (at your
+# option) any later version.
+#
+# GNUnet is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNUnet; see the file COPYING. If not, write to the
+# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+#
+#
+# Process this file with autoconf to produce a configure script.
+#
+AC_PREREQ(2.61)
+AC_INIT([gnunet-ext],[0.0.0],address@hidden)
+AM_INIT_AUTOMAKE([gnunet-ext], [0.0.0])
+AM_CONFIG_HEADER(gnunet_ext_config.h)
+
+AH_TOP([#define _GNU_SOURCE 1])
+
+AC_ISC_POSIX
+AC_PROG_AWK
+AC_PROG_CC
+
+AC_PROG_MKDIR_P
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
+AC_LIBTOOL_WIN32_DLL
+AC_PROG_CC
+AM_PROG_CC_STDC
+AC_HEADER_STDC
+AC_CANONICAL_HOST
+
+# dynamic libraries/plugins
+AC_DISABLE_STATIC
+AC_PROG_LIBTOOL
+
+AC_SYS_LARGEFILE
+AC_FUNC_FSEEKO
+
+CFLAGS="-Wall $CFLAGS"
+# use '-fno-strict-aliasing', but only if the compiler can take it
+if gcc -fno-strict-aliasing -S -o /dev/null -xc /dev/null >/dev/null 2>&1;
+then
+ CFLAGS="-fno-strict-aliasing $CFLAGS"
+fi
+
+
+# Check system type
+case "$host_os" in
+*darwin* | *rhapsody* | *macosx*)
+ AC_DEFINE_UNQUOTED(OSX,1,[This is an OS X system])
+ CFLAGS="-no-cpp-precomp $CFLAGS"
+ LDFLAGS="-flat_namespace -undefined suppress $LDFLAGS"
+ ;;
+linux*)
+ AC_DEFINE_UNQUOTED(LINUX,1,[This is a Linux system])
+ ;;
+freebsd*)
+ AC_DEFINE_UNQUOTED(SOMEBSD,1,[This is a BSD system])
+ AC_DEFINE_UNQUOTED(FREEBSD,1,[This is a FreeBSD system])
+ ;;
+openbsd*)
+ AC_DEFINE_UNQUOTED(SOMEBSD,1,[This is a BSD system])
+ AC_DEFINE_UNQUOTED(OPENBSD,1,[This is an OpenBSD system])
+ ;;
+netbsd*)
+ AC_DEFINE_UNQUOTED(SOMEBSD,1,[This is a BSD system])
+ AC_DEFINE_UNQUOTED(NETBSD,1,[This is a NetBSD system])
+ ;;
+*solaris*)
+ AC_DEFINE_UNQUOTED(SOLARIS,1,[This is a Solaris system])
+ AC_DEFINE_UNQUOTED(_REENTRANT,1,[Need with solaris or errno doesnt work])
+ build_target="solaris"
+ ;;
+*arm-linux*)
+ AC_DEFINE_UNQUOTED(LINUX,1,[This is a Linux system])
+ ;;
+*cygwin*)
+ AC_DEFINE_UNQUOTED(CYGWIN,1,[This is a Cygwin system])
+ AC_DEFINE_UNQUOTED(WINDOWS,1,[This is a Windows system])
+ AC_CHECK_LIB(intl, gettext)
+ LDFLAGS="$LDFLAGS -no-undefined"
+ build_target="cygwin"
+ ;;
+*mingw*)
+ AC_DEFINE_UNQUOTED(MINGW,1,[This is a MinGW system])
+ AC_DEFINE_UNQUOTED(WINDOWS,1,[This is a Windows system])
+ AC_DEFINE_UNQUOTED(_WIN32,1,[This is a Windows system])
+ AC_CHECK_LIB(intl, gettext)
+ LDFLAGS="$LDFLAGS -no-undefined -Wl,--export-all-symbols -lws2_32"
+ CFLAGS="-mms-bitfields $CFLAGS"
+ build_target="mingw"
+ ;;
+*)
+ AC_MSG_RESULT(Unrecognised OS $host_os)
+ AC_DEFINE_UNQUOTED(OTHEROS,1,[Some strange OS])
+;;
+esac
+
+AM_CONDITIONAL(MINGW, test "$build_target" = "mingw")
+
+# check for gettext
+AM_GNU_GETTEXT_VERSION([0.18.1])
+AM_GNU_GETTEXT([external])
+
+AC_CHECK_HEADERS([errno.h stdio.h unistd.h locale.h sys/stat.h sys/types.h
langinfo.h libintl.h unistd.h stddef.h argz.h sys/socket.h netinet/in.h
stdarg.h])
+
+# test for GNUnet core
+gnunet=0
+lookin=${prefix}
+backup_LIBS="$LIBS"
+backup_CFLAGS="$CFLAGS "
+backup_CPPFLAGS="$CPPFLAGS"
+GNUNET_CFLAGS=""
+GNUNET_CPPFLAGS=""
+GNUNET_LIBS=""
+AC_MSG_CHECKING(for GNUnet core)
+AC_ARG_WITH(gnunet,
+ [ --with-gnunet=PFX Base of GNUnet installation],
+ [AC_MSG_RESULT([$with_gnunet])
+ case $with_gnunet in
+ no)
+ lookin=""
+ ;;
+ yes)
+ lookin="${prefix}"
+ ;;
+ *)
+ lookin="$with_gnunet"
+ ;;
+ esac
+ ],
+ [
+ AC_MSG_RESULT([--with-gnunet not specified])
+ PKG_CHECK_MODULES([GNUNET], [gnunetutil >= 0.9.0], gnunet=1)
+ ]
+)
+
+if test "x$gnunet" == "x0" -a ! "x$lookin" == "x"
+then
+ AC_MSG_CHECKING(for GNUnet util library in $lookin)
+ GNUNET_LIBS="-L${lookin}/lib"
+ GNUNET_CFLAGS="-I${lookin}/include"
+ GNUNET_CPPFLAGS="-I${lookin}/include"
+ LIBS="$GNUNET_LIBS $backup_LIBS"
+ CFLAGS="$GNUNET_CFLAGS $backup_CFLAGS"
+ CPPFLAGS="$GNUNET_CPPFLAGS $backup_CPPFLAGS"
+ AC_CHECK_HEADERS([gnunet/gnunet_util_lib.h],
+ AC_CHECK_LIB([gnunetutil], [GNUNET_xfree_],
+ [
+ gnunet=1
+ EXT_LIB_PATH="-L${lookin}/lib $EXT_LIB_PATH"
+ ]
+ ),,[#include <gnunet/platform.h>]
+ )
+fi
+
+if test "x$gnunet" == "x0"
+then
+ AC_MSG_ERROR([gnunet-gtk requires GNUnet])
+fi
+
+AC_SUBST(GNUNET_CFLAGS)
+AC_SUBST(GNUNET_LIBS)
+LIBS="$backup_LIBS"
+CFLAGS="$backup_CFLAGS"
+CPPFLAGS="$backup_CPPFLAGS"
+
+AC_DEFINE_DIR([PACKAGE_DATA], [datarootdir], [The directory for installing
read-only architecture-independent data])
+
+# Set PACKAGE_SOURCE_DIR in gnunet_gtk_config.h.
+packagesrcdir=`cd $srcdir && pwd`
+AC_DEFINE_UNQUOTED(PACKAGE_SOURCE_DIR, "${packagesrcdir}", [source dir])
+
+AC_OUTPUT([ po/Makefile.in
+Makefile
+src/Makefile
+src/include/Makefile
+src/ext/Makefile
+])
Deleted: gnunet-update/gnunet-ext/ABOUT-NLS
===================================================================
--- gnunet-ext/ABOUT-NLS 2012-11-20 16:26:27 UTC (rev 25072)
+++ gnunet-update/gnunet-ext/ABOUT-NLS 2012-11-21 08:19:39 UTC (rev 25073)
@@ -1,1282 +0,0 @@
-1 Notes on the Free Translation Project
-***************************************
-
-Free software is going international! The Free Translation Project is
-a way to get maintainers of free software, translators, and users all
-together, so that free software will gradually become able to speak many
-languages. A few packages already provide translations for their
-messages.
-
- If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site. But you do _not_
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
- Installers will find here some useful hints. These notes also
-explain how users should proceed for getting the programs to use the
-available translations. They tell how people wanting to contribute and
-work on translations can contact the appropriate team.
-
-1.1 INSTALL Matters
-===================
-
-Some packages are "localizable" when properly installed; the programs
-they contain can be made to speak your own native language. Most such
-packages use GNU `gettext'. Other packages have their own ways to
-internationalization, predating GNU `gettext'.
-
- By default, this package will be installed to allow translation of
-messages. It will automatically detect whether the system already
-provides the GNU `gettext' functions. Installers may use special
-options at configuration time for changing the default behaviour. The
-command:
-
- ./configure --disable-nls
-
-will _totally_ disable translation of messages.
-
- When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl' library
-and will decide to use it. If not, you may have to to use the
-`--with-libintl-prefix' option to tell `configure' where to look for it.
-
- Internationalized packages usually have many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language. Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package. However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-1.2 Using This Package
-======================
-
-As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-`LL_CC' combination. If you happen to have the `LC_ALL' or some other
-`LC_xxx' environment variables set, you should unset them before
-setting `LANG', otherwise the setting of `LANG' will not have the
-desired effect. Here `LL' is an ISO 639 two-letter language code, and
-`CC' is an ISO 3166 two-letter country code. For example, let's
-suppose that you speak German and live in Germany. At the shell
-prompt, merely execute `setenv LANG de_DE' (in `csh'),
-`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-This can be done from your `.login' or `.profile' file, once and for
-all.
-
- You might think that the country code specification is redundant.
-But in fact, some languages have dialects in different countries. For
-example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
-country code serves to distinguish the dialects.
-
- The locale naming convention of `LL_CC', with `LL' denoting the
-language and `CC' denoting the country, is the one use on systems based
-on GNU libc. On other systems, some variations of this scheme are
-used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
-locales supported by your system for your language by running the
-command `locale -a | grep '^LL''.
-
- Not all programs have translations for all languages. By default, an
-English message is shown in place of a nonexistent translation. If you
-understand other languages, you can set up a priority list of languages.
-This is done through a different environment variable, called
-`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-for the purpose of message handling, but you still need to have `LANG'
-set to the primary language; this is required by other parts of the
-system libraries. For example, some Swedish users who would rather
-read translations in German than English for when Swedish is not
-available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-
- Special advice for Norwegian users: The language code for Norwegian
-bokma*l changed from `no' to `nb' recently (in 2003). During the
-transition period, while some message catalogs for this language are
-installed under `nb' and some older ones under `no', it's recommended
-for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-older translations are used.
-
- In the `LANGUAGE' environment variable, but not in the `LANG'
-environment variable, `LL_CC' combinations can be abbreviated as `LL'
-to denote the language's main dialect. For example, `de' is equivalent
-to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-(Portuguese as spoken in Portugal) in this context.
-
-1.3 Translating Teams
-=====================
-
-For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list. The up-to-date list of
-teams can be found at the Free Translation Project's homepage,
-`http://translationproject.org/', in the "Teams" area.
-
- If you'd like to volunteer to _work_ at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is _not_ the same as the list itself, it has
-`-request' appended. For example, speakers of Swedish can send a
-message to address@hidden', having this message body:
-
- subscribe
-
- Keep in mind that team members are expected to participate
-_actively_ in translations, or at solving translational difficulties,
-rather than merely lurking around. If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to address@hidden' to
-reach the coordinator for all translator teams.
-
- The English team is special. It works at improving and uniformizing
-the terminology in use. Proven linguistic skills are praised more than
-programming skills, here.
-
-1.4 Available Packages
-======================
-
-Languages are not equally supported in all packages. The following
-matrix shows the current state of internationalization, as of June
-2010. The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination, with a
-translation percentage of at least 50%.
-
- Ready PO files af am an ar as ast az be address@hidden bg bn_IN bs
ca
- +--------------------------------------------------+
- a2ps | [] [] |
- aegis | |
- ant-phone | |
- anubis | |
- aspell | [] [] |
- bash | |
- bfd | |
- bibshelf | [] |
- binutils | |
- bison | |
- bison-runtime | [] |
- bluez-pin | [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] [] |
- cpio | |
- cppi | |
- cpplib | [] |
- cryptsetup | |
- dfarc | |
- dialog | [] [] |
- dico | |
- diffutils | [] |
- dink | |
- doodle | |
- e2fsprogs | [] |
- enscript | [] |
- exif | |
- fetchmail | [] |
- findutils | [] |
- flex | [] |
- freedink | |
- gas | |
- gawk | [] [] |
- gcal | [] |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] |
- gettext-tools | [] [] |
- gip | [] |
- gjay | |
- gliv | [] |
- glunarclock | [] [] |
- gnubiff | |
- gnucash | [] |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | |
- gold | |
- gpe-aerial | |
- gpe-beam | |
- gpe-bluetooth | |
- gpe-calendar | |
- gpe-clock | [] |
- gpe-conf | |
- gpe-contacts | |
- gpe-edit | |
- gpe-filemanager | |
- gpe-go | |
- gpe-login | |
- gpe-ownerinfo | [] |
- gpe-package | |
- gpe-sketchbook | |
- gpe-su | [] |
- gpe-taskmanager | [] |
- gpe-timesheet | [] |
- gpe-today | [] |
- gpe-todo | |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | [] [] |
- gsasl | |
- gss | |
- gst-plugins-bad | [] |
- gst-plugins-base | [] |
- gst-plugins-good | [] |
- gst-plugins-ugly | [] |
- gstreamer | [] [] [] |
- gtick | |
- gtkam | [] |
- gtkorphan | [] |
- gtkspell | [] [] [] |
- gutenprint | |
- hello | [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | [] [] |
- iso_15924 | |
- iso_3166 | [] [] [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | |
- iso_639 | [] [] [] [] |
- iso_639_3 | |
- jwhois | |
- kbd | |
- keytouch | [] |
- keytouch-editor | |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | |
- ld | [] |
- leafpad | [] [] |
- libc | [] [] |
- libexif | () |
- libextractor | |
- libgnutls | |
- libgpewidget | |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | [] |
- libidn | |
- lifelines | |
- liferea | [] [] |
- lilypond | |
- linkdr | [] |
- lordsawar | |
- lprng | |
- lynx | [] |
- m4 | |
- mailfromd | |
- mailutils | |
- make | |
- man-db | |
- man-db-manpages | |
- minicom | |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | |
- psmisc | |
- pspp | [] |
- pwdutils | |
- radius | [] |
- recode | [] [] |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] |
- sed | [] [] |
- sharutils | [] [] |
- shishi | |
- skencil | |
- solfege | |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | |
- tar | [] |
- texinfo | |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] [] |
- wyslij-po | |
- xchat | [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] |
- +--------------------------------------------------+
- af am an ar as ast az be address@hidden bg bn_IN bs
ca
- 6 0 1 2 3 19 1 10 3 28 3 1 38
-
- crh cs da de el en en_GB en_ZA eo es et eu fa
- +-------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] () |
- anubis | [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] [] |
- bfd | [] |
- bibshelf | [] [] [] |
- binutils | [] |
- bison | [] [] |
- bison-runtime | [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] [] [] |
- cflow | [] [] |
- clisp | [] [] [] [] |
- coreutils | [] [] [] [] |
- cpio | |
- cppi | |
- cpplib | [] [] [] |
- cryptsetup | [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] |
- dink | [] [] [] |
- doodle | [] |
- e2fsprogs | [] [] [] |
- enscript | [] [] [] |
- exif | () [] [] |
- fetchmail | [] [] () [] [] [] |
- findutils | [] [] [] |
- flex | [] [] |
- freedink | [] [] [] |
- gas | [] |
- gawk | [] [] [] |
- gcal | [] |
- gcc | [] [] |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] [] [] |
- gettext-tools | [] [] [] |
- gip | [] [] [] [] |
- gjay | [] |
- gliv | [] [] [] |
- glunarclock | [] [] |
- gnubiff | () |
- gnucash | [] () () () () |
- gnuedu | [] [] |
- gnulib | [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] |
- gpe-aerial | [] [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] |
- gpe-conf | [] [] [] |
- gpe-contacts | [] [] [] |
- gpe-edit | [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] |
- gpe-taskmanager | [] [] [] [] |
- gpe-timesheet | [] [] [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] () [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] |
- grub | [] [] |
- gsasl | [] |
- gss | |
- gst-plugins-bad | [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] () [] |
- gtkam | [] [] () [] [] |
- gtkorphan | [] [] [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | [] [] [] |
- hello | [] [] [] [] |
- help2man | [] |
- hylafax | [] [] |
- idutils | [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] [] [] [] () [] [] [] () |
- iso_3166_2 | () |
- iso_4217 | [] [] [] () [] [] |
- iso_639 | [] [] [] [] () [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | [] [] [] [] [] |
- keytouch | [] [] |
- keytouch-editor | [] [] |
- keytouch-keyboa... | [] |
- klavaro | [] [] [] [] |
- latrine | [] () |
- ld | [] [] |
- leafpad | [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] () |
- libgphoto2_port | [] () [] |
- libgsasl | |
- libiconv | [] [] [] [] [] |
- libidn | [] [] [] |
- lifelines | [] () |
- liferea | [] [] [] [] [] |
- lilypond | [] [] [] |
- linkdr | [] [] [] |
- lordsawar | [] |
- lprng | |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailfromd | |
- mailutils | [] |
- make | [] [] [] |
- man-db | |
- man-db-manpages | |
- minicom | [] [] [] [] |
- mkisofs | |
- myserver | |
- nano | [] [] [] |
- opcodes | [] [] |
- parted | [] [] |
- pies | |
- popt | [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] |
- pwdutils | [] |
- radius | [] |
- recode | [] [] [] [] [] [] |
- rosegarden | () () () |
- rpm | [] [] [] |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] |
- sed | [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | |
- skencil | [] () [] |
- solfege | [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] [] |
- sp | [] |
- sysstat | [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] |
- tin | [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] |
- vice | () () |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] |
- wyslij-po | |
- xchat | [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] [] |
- +-------------------------------------------------+
- crh cs da de el en en_GB en_ZA eo es et eu fa
- 5 64 105 117 18 1 8 0 28 89 18 19 0
-
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- +----------------------------------------------------+
- a2ps | [] [] [] [] |
- aegis | [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] [] |
- aspell | [] [] [] [] |
- bash | [] [] [] [] |
- bfd | [] [] [] |
- bibshelf | [] [] [] [] [] |
- binutils | [] [] [] |
- bison | [] [] [] [] |
- bison-runtime | [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] |
- cflow | [] [] [] |
- clisp | [] |
- coreutils | [] [] [] [] [] |
- cpio | [] [] [] [] |
- cppi | [] [] |
- cpplib | [] [] [] |
- cryptsetup | [] [] [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] [] [] [] |
- dink | [] |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] |
- exif | [] [] [] [] [] [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] [] |
- flex | [] [] [] |
- freedink | [] [] [] |
- gas | [] [] |
- gawk | [] [] [] [] () [] |
- gcal | [] |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] |
- gip | [] [] [] [] [] [] |
- gjay | [] |
- gliv | [] () |
- glunarclock | [] [] [] [] |
- gnubiff | () [] () |
- gnucash | () () () () () [] |
- gnuedu | [] [] |
- gnulib | [] [] [] [] [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] [] |
- gpe-aerial | [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] [] [] |
- gpe-calendar | [] [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] [] [] |
- gpe-contacts | [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] [] |
- gpe-go | [] [] [] [] [] |
- gpe-login | [] [] [] |
- gpe-ownerinfo | [] [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] [] [] [] [] |
- gprof | [] [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] [] |
- grub | [] [] [] [] |
- gsasl | [] [] [] [] [] |
- gss | [] [] [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] [] [] |
- gtkam | [] [] [] [] [] |
- gtkorphan | [] [] [] |
- gtkspell | [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] [] [] |
- hello | [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | () [] [] [] |
- iso_4217 | [] () [] [] [] [] |
- iso_639 | [] () [] [] [] [] [] [] [] |
- iso_639_3 | () [] [] |
- jwhois | [] [] [] [] [] |
- kbd | [] [] |
- keytouch | [] [] [] [] [] [] |
- keytouch-editor | [] [] [] [] [] |
- keytouch-keyboa... | [] [] [] [] [] |
- klavaro | [] [] |
- latrine | [] [] [] |
- ld | [] [] [] [] |
- leafpad | [] [] [] [] [] [] [] () |
- libc | [] [] [] [] [] |
- libexif | [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] [] |
- libgphoto2_port | [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] [] |
- libidn | [] [] [] [] |
- lifelines | () |
- liferea | [] [] [] [] |
- lilypond | [] [] |
- linkdr | [] [] [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] [] [] |
- m4 | [] [] [] [] [] [] |
- mailfromd | |
- mailutils | [] [] |
- make | [] [] [] [] [] [] [] [] [] |
- man-db | [] [] |
- man-db-manpages | [] |
- minicom | [] [] [] [] [] |
- mkisofs | [] [] [] [] |
- myserver | |
- nano | [] [] [] [] [] [] |
- opcodes | [] [] [] [] |
- parted | [] [] [] [] |
- pies | |
- popt | [] [] [] [] [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | |
- pwdutils | [] [] |
- radius | [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () () () () |
- rpm | [] [] |
- rush | |
- sarg | [] |
- screem | [] [] |
- scrollkeeper | [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] [] [] [] |
- shishi | [] |
- skencil | [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] |
- sp | [] () |
- sysstat | [] [] [] [] [] |
- tar | [] [] [] [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | [] [] |
- util-linux-ng | [] [] [] [] [] [] |
- vice | () () () |
- vmm | [] |
- vorbis-tools | [] |
- wastesedge | () () |
- wdiff | [] |
- wget | [] [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] |
- +----------------------------------------------------+
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
-
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- +-----------------------------------------------+
- a2ps | [] |
- aegis | |
- ant-phone | |
- anubis | [] [] |
- aspell | [] |
- bash | |
- bfd | |
- bibshelf | [] [] |
- binutils | |
- bison | [] |
- bison-runtime | [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] |
- cpio | |
- cppi | |
- cpplib | |
- cryptsetup | |
- dfarc | [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] |
- dink | |
- doodle | |
- e2fsprogs | |
- enscript | |
- exif | [] |
- fetchmail | |
- findutils | |
- flex | |
- freedink | [] |
- gas | |
- gawk | |
- gcal | |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] |
- gettext-tools | [] |
- gip | [] [] |
- gjay | |
- gliv | |
- glunarclock | [] |
- gnubiff | |
- gnucash | () () () () |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] |
- gold | |
- gpe-aerial | [] |
- gpe-beam | [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] |
- gpe-contacts | [] [] |
- gpe-edit | [] |
- gpe-filemanager | [] [] |
- gpe-go | [] [] [] |
- gpe-login | [] |
- gpe-ownerinfo | [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] |
- gpe-timesheet | [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | |
- gsasl | |
- gss | |
- gst-plugins-bad | [] [] [] [] |
- gst-plugins-base | [] [] |
- gst-plugins-good | [] [] |
- gst-plugins-ugly | [] [] [] [] [] |
- gstreamer | |
- gtick | |
- gtkam | [] |
- gtkorphan | [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | |
- hello | [] [] [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | |
- iso_15924 | [] [] |
- iso_3166 | [] [] () [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | [] [] |
- iso_639 | [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | |
- keytouch | [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | [] |
- ld | |
- leafpad | [] [] [] |
- libc | [] |
- libexif | |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | |
- libidn | |
- lifelines | |
- liferea | |
- lilypond | |
- linkdr | |
- lordsawar | |
- lprng | |
- lynx | |
- m4 | |
- mailfromd | |
- mailutils | |
- make | [] |
- man-db | |
- man-db-manpages | |
- minicom | [] |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | [] [] [] |
- psmisc | |
- pspp | |
- pwdutils | |
- radius | |
- recode | |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] |
- sed | |
- sharutils | |
- shishi | |
- skencil | |
- solfege | [] |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | [] |
- tar | [] |
- texinfo | [] |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] |
- wyslij-po | |
- xchat | [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +-----------------------------------------------+
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
-
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] |
- bfd | [] |
- bibshelf | [] [] |
- binutils | [] [] |
- bison | [] [] [] |
- bison-runtime | [] [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] () |
- buzztard | [] [] |
- cflow | [] |
- clisp | [] [] |
- coreutils | [] [] [] [] [] [] |
- cpio | [] [] [] |
- cppi | [] |
- cpplib | [] |
- cryptsetup | [] |
- dfarc | [] |
- dialog | [] [] [] [] |
- dico | [] |
- diffutils | [] [] [] [] [] [] |
- dink | () |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] [] |
- exif | [] [] [] () [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] |
- flex | [] [] [] [] [] |
- freedink | [] [] |
- gas | |
- gawk | [] [] [] [] |
- gcal | |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] [] [] |
- gip | [] [] [] [] [] |
- gjay | |
- gliv | [] [] [] [] [] [] |
- glunarclock | [] [] [] [] [] |
- gnubiff | [] () |
- gnucash | [] () () () |
- gnuedu | [] |
- gnulib | [] [] [] [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] [] |
- gold | |
- gpe-aerial | [] [] [] [] [] [] [] |
- gpe-beam | [] [] [] [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] [] [] [] |
- gpe-clock | [] [] [] [] [] [] [] [] |
- gpe-conf | [] [] [] [] [] [] [] |
- gpe-contacts | [] [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] [] [] [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] [] [] [] [] [] |
- gpe-su | [] [] [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] [] [] |
- gphoto2 | [] [] [] [] [] [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] |
- gramadoir | [] [] |
- grep | [] [] [] [] |
- grub | [] [] [] |
- gsasl | [] [] [] [] |
- gss | [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] |
- gtkam | [] [] [] [] [] [] |
- gtkorphan | [] |
- gtkspell | [] [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] |
- hello | [] [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] [] [] [] |
- iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
- iso_3166_2 | [] [] [] |
- iso_4217 | [] [] [] [] [] [] [] [] |
- iso_639 | [] [] [] [] [] [] [] [] [] |
- iso_639_3 | [] [] |
- jwhois | [] [] [] [] |
- kbd | [] [] [] |
- keytouch | [] [] [] |
- keytouch-editor | [] [] [] |
- keytouch-keyboa... | [] [] [] |
- klavaro | [] [] |
- latrine | [] [] |
- ld | |
- leafpad | [] [] [] [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] |
- libgphoto2_port | [] [] [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] |
- libidn | [] [] |
- lifelines | [] [] |
- liferea | [] [] [] [] [] () () [] |
- lilypond | [] |
- linkdr | [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] |
- m4 | [] [] [] [] [] |
- mailfromd | [] |
- mailutils | [] |
- make | [] [] [] [] |
- man-db | [] [] [] |
- man-db-manpages | [] [] [] |
- minicom | [] [] [] [] |
- mkisofs | [] [] [] |
- myserver | |
- nano | [] [] [] [] |
- opcodes | [] [] |
- parted | [] [] [] [] |
- pies | [] |
- popt | [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] [] |
- pwdutils | [] |
- radius | [] [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () |
- rpm | [] [] [] |
- rush | [] [] |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | [] |
- skencil | [] [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] [] |
- soundtracker | [] |
- sp | |
- sysstat | [] [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] [] |
- vice | [] |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +---------------------------------------------------+
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
-
- sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] |
27
- aegis | [] |
9
- ant-phone | [] [] [] [] |
9
- anubis | [] [] [] [] |
15
- aspell | [] [] [] |
20
- bash | [] [] [] |
12
- bfd | [] |
6
- bibshelf | [] [] [] |
16
- binutils | [] [] |
8
- bison | [] [] |
12
- bison-runtime | [] [] [] [] [] [] |
29
- bluez-pin | [] [] [] [] [] [] [] [] |
37
- bombono-dvd | [] |
4
- buzztard | [] |
7
- cflow | [] [] [] |
9
- clisp | |
10
- coreutils | [] [] [] [] |
22
- cpio | [] [] [] [] [] [] |
13
- cppi | [] [] |
5
- cpplib | [] [] [] [] [] [] |
14
- cryptsetup | [] [] |
7
- dfarc | [] |
9
- dialog | [] [] [] [] [] [] [] |
30
- dico | [] |
2
- diffutils | [] [] [] [] [] [] |
30
- dink | |
4
- doodle | [] [] |
7
- e2fsprogs | [] [] [] |
11
- enscript | [] [] [] [] |
17
- exif | [] [] [] |
16
- fetchmail | [] [] [] |
17
- findutils | [] [] [] [] [] |
20
- flex | [] [] [] [] |
15
- freedink | [] |
10
- gas | [] |
4
- gawk | [] [] [] [] |
18
- gcal | [] [] |
5
- gcc | [] [] [] |
7
- gettext-examples | [] [] [] [] [] [] [] |
34
- gettext-runtime | [] [] [] [] [] [] [] |
29
- gettext-tools | [] [] [] [] [] [] |
22
- gip | [] [] [] [] |
22
- gjay | [] |
3
- gliv | [] [] [] |
14
- glunarclock | [] [] [] [] [] |
19
- gnubiff | [] [] |
4
- gnucash | () [] () [] () |
10
- gnuedu | [] [] |
7
- gnulib | [] [] [] [] |
16
- gnunet | [] |
1
- gnunet-gtk | [] [] [] |
5
- gnutls | [] [] [] |
10
- gold | [] |
4
- gpe-aerial | [] [] [] |
18
- gpe-beam | [] [] [] |
19
- gpe-bluetooth | [] [] [] |
13
- gpe-calendar | [] [] [] [] |
12
- gpe-clock | [] [] [] [] [] |
28
- gpe-conf | [] [] [] [] |
20
- gpe-contacts | [] [] [] |
17
- gpe-edit | [] [] [] |
12
- gpe-filemanager | [] [] [] [] |
16
- gpe-go | [] [] [] [] [] |
25
- gpe-login | [] [] [] |
11
- gpe-ownerinfo | [] [] [] [] [] |
25
- gpe-package | [] [] [] |
13
- gpe-sketchbook | [] [] [] |
20
- gpe-su | [] [] [] [] [] |
30
- gpe-taskmanager | [] [] [] [] [] |
29
- gpe-timesheet | [] [] [] [] [] |
25
- gpe-today | [] [] [] [] [] [] |
30
- gpe-todo | [] [] [] [] |
17
- gphoto2 | [] [] [] [] [] |
24
- gprof | [] [] [] |
15
- gpsdrive | [] [] [] |
11
- gramadoir | [] [] [] |
11
- grep | [] [] [] |
10
- grub | [] [] [] |
14
- gsasl | [] [] [] [] |
14
- gss | [] [] [] |
11
- gst-plugins-bad | [] [] [] [] |
26
- gst-plugins-base | [] [] [] [] [] |
24
- gst-plugins-good | [] [] [] [] |
24
- gst-plugins-ugly | [] [] [] [] [] |
29
- gstreamer | [] [] [] [] |
22
- gtick | [] [] [] |
13
- gtkam | [] [] [] |
20
- gtkorphan | [] [] [] |
14
- gtkspell | [] [] [] [] [] [] [] [] [] |
45
- gutenprint | [] |
10
- hello | [] [] [] [] [] [] |
21
- help2man | [] [] |
7
- hylafax | [] |
5
- idutils | [] [] [] [] |
17
- indent | [] [] [] [] [] [] |
30
- iso_15924 | () [] () [] [] |
16
- iso_3166 | [] [] () [] [] () [] [] [] () |
53
- iso_3166_2 | () [] () [] |
9
- iso_4217 | [] () [] [] () [] [] |
26
- iso_639 | [] [] [] () [] () [] [] [] [] |
38
- iso_639_3 | [] () |
8
- jwhois | [] [] [] [] [] |
16
- kbd | [] [] [] [] [] |
15
- keytouch | [] [] [] |
16
- keytouch-editor | [] [] [] |
14
- keytouch-keyboa... | [] [] [] |
14
- klavaro | [] |
11
- latrine | [] [] [] |
10
- ld | [] [] [] [] |
11
- leafpad | [] [] [] [] [] [] |
33
- libc | [] [] [] [] [] |
21
- libexif | [] () |
7
- libextractor | [] |
1
- libgnutls | [] [] [] |
9
- libgpewidget | [] [] [] |
14
- libgpg-error | [] [] [] |
9
- libgphoto2 | [] [] |
8
- libgphoto2_port | [] [] [] [] |
14
- libgsasl | [] [] [] |
13
- libiconv | [] [] [] [] |
21
- libidn | () [] [] |
11
- lifelines | [] |
4
- liferea | [] [] [] |
21
- lilypond | [] |
7
- linkdr | [] [] [] [] [] |
17
- lordsawar | |
1
- lprng | [] |
3
- lynx | [] [] [] [] |
17
- m4 | [] [] [] [] |
19
- mailfromd | [] [] |
3
- mailutils | [] |
5
- make | [] [] [] [] |
21
- man-db | [] [] [] |
8
- man-db-manpages | |
4
- minicom | [] [] |
16
- mkisofs | [] [] |
9
- myserver | | 0
- nano | [] [] [] [] |
21
- opcodes | [] [] [] |
11
- parted | [] [] [] [] [] |
15
- pies | [] [] |
3
- popt | [] [] [] [] [] [] |
27
- psmisc | [] [] |
11
- pspp | |
4
- pwdutils | [] [] |
6
- radius | [] [] |
9
- recode | [] [] [] [] |
28
- rosegarden | () | 0
- rpm | [] [] [] |
11
- rush | [] [] |
4
- sarg | |
1
- screem | [] |
3
- scrollkeeper | [] [] [] [] [] |
27
- sed | [] [] [] [] [] |
30
- sharutils | [] [] [] [] [] |
22
- shishi | [] |
3
- skencil | [] [] |
7
- solfege | [] [] [] [] |
16
- solfege-manual | [] |
8
- soundtracker | [] [] [] |
9
- sp | [] |
3
- sysstat | [] [] |
15
- tar | [] [] [] [] [] [] |
23
- texinfo | [] [] [] [] [] |
17
- tin | |
4
- unicode-han-tra... | | 0
- unicode-transla... | |
2
- util-linux-ng | [] [] [] [] |
20
- vice | () () |
1
- vmm | [] |
4
- vorbis-tools | [] |
6
- wastesedge | |
2
- wdiff | [] [] |
7
- wget | [] [] [] [] [] |
26
- wyslij-po | [] [] |
8
- xchat | [] [] [] [] [] [] |
36
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] |
63
- xkeyboard-config | [] [] [] |
22
- +---------------------------------------------------+
- 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41
2618
-
- Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect. This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
- For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer. There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
- If June 2010 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
-matrix with full percentage details can be found at
-`http://translationproject.org/extra/matrix.html'.
-
-1.5 Using `gettext' in new packages
-===================================
-
-If you are writing a freely available program and want to
-internationalize it you are welcome to use GNU `gettext' in your
-package. Of course you have to respect the GNU Library General Public
-License which covers the use of the GNU `gettext' library. This means
-in particular that even non-free programs can use `libintl' as a shared
-library, whereas only free software can use `libintl' as a static
-library or use modified versions of `libintl'.
-
- Once the sources are changed appropriately and the setup can handle
-the use of `gettext' the only thing missing are the translations. The
-Free Translation Project is also available for packages which are not
-developed inside the GNU project. Therefore the information given above
-applies also for every other Free Software Project. Contact
address@hidden' to make the `.pot' files available
-to the translation teams.
-
Deleted: gnunet-update/gnunet-ext/INSTALL
===================================================================
--- gnunet-ext/INSTALL 2012-11-20 16:26:27 UTC (rev 25072)
+++ gnunet-update/gnunet-ext/INSTALL 2012-11-21 08:19:39 UTC (rev 25073)
@@ -1,365 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
- The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
-
- 4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
Deleted: gnunet-update/gnunet-ext/bootstrap
===================================================================
--- gnunet-ext/bootstrap 2012-11-20 16:26:27 UTC (rev 25072)
+++ gnunet-update/gnunet-ext/bootstrap 2012-11-21 08:19:39 UTC (rev 25073)
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-libtoolize --automake --copy --force
-aclocal -I m4
-autoheader
-autoconf
-automake --add-missing --copy
-
Deleted: gnunet-update/gnunet-ext/configure.ac
===================================================================
--- gnunet-ext/configure.ac 2012-11-20 16:26:27 UTC (rev 25072)
+++ gnunet-update/gnunet-ext/configure.ac 2012-11-21 08:19:39 UTC (rev
25073)
@@ -1,191 +0,0 @@
-# This file is part of GNUnet.
-# (C) 2001-2011 Christian Grothoff (and other contributing authors)
-#
-# GNUnet is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published
-# by the Free Software Foundation; either version 2, or (at your
-# option) any later version.
-#
-# GNUnet is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNUnet; see the file COPYING. If not, write to the
-# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-#
-#
-# Process this file with autoconf to produce a configure script.
-#
-AC_PREREQ(2.61)
-AC_INIT([gnunet-ext],[0.0.0],address@hidden)
-AM_INIT_AUTOMAKE([gnunet-ext], [0.0.0])
-AM_CONFIG_HEADER(gnunet_ext_config.h)
-
-AH_TOP([#define _GNU_SOURCE 1])
-
-AC_ISC_POSIX
-AC_PROG_AWK
-AC_PROG_CC
-
-AC_PROG_MKDIR_P
-AC_PROG_CPP
-AC_PROG_INSTALL
-AC_PROG_LN_S
-AC_PROG_MAKE_SET
-AC_LIBTOOL_WIN32_DLL
-AC_PROG_CC
-AM_PROG_CC_STDC
-AC_HEADER_STDC
-AC_CANONICAL_HOST
-
-# dynamic libraries/plugins
-AC_DISABLE_STATIC
-AC_PROG_LIBTOOL
-
-AC_SYS_LARGEFILE
-AC_FUNC_FSEEKO
-
-CFLAGS="-Wall $CFLAGS"
-# use '-fno-strict-aliasing', but only if the compiler can take it
-if gcc -fno-strict-aliasing -S -o /dev/null -xc /dev/null >/dev/null 2>&1;
-then
- CFLAGS="-fno-strict-aliasing $CFLAGS"
-fi
-
-
-# Check system type
-case "$host_os" in
-*darwin* | *rhapsody* | *macosx*)
- AC_DEFINE_UNQUOTED(OSX,1,[This is an OS X system])
- CFLAGS="-no-cpp-precomp $CFLAGS"
- LDFLAGS="-flat_namespace -undefined suppress $LDFLAGS"
- ;;
-linux*)
- AC_DEFINE_UNQUOTED(LINUX,1,[This is a Linux system])
- ;;
-freebsd*)
- AC_DEFINE_UNQUOTED(SOMEBSD,1,[This is a BSD system])
- AC_DEFINE_UNQUOTED(FREEBSD,1,[This is a FreeBSD system])
- ;;
-openbsd*)
- AC_DEFINE_UNQUOTED(SOMEBSD,1,[This is a BSD system])
- AC_DEFINE_UNQUOTED(OPENBSD,1,[This is an OpenBSD system])
- ;;
-netbsd*)
- AC_DEFINE_UNQUOTED(SOMEBSD,1,[This is a BSD system])
- AC_DEFINE_UNQUOTED(NETBSD,1,[This is a NetBSD system])
- ;;
-*solaris*)
- AC_DEFINE_UNQUOTED(SOLARIS,1,[This is a Solaris system])
- AC_DEFINE_UNQUOTED(_REENTRANT,1,[Need with solaris or errno doesnt work])
- build_target="solaris"
- ;;
-*arm-linux*)
- AC_DEFINE_UNQUOTED(LINUX,1,[This is a Linux system])
- ;;
-*cygwin*)
- AC_DEFINE_UNQUOTED(CYGWIN,1,[This is a Cygwin system])
- AC_DEFINE_UNQUOTED(WINDOWS,1,[This is a Windows system])
- AC_CHECK_LIB(intl, gettext)
- LDFLAGS="$LDFLAGS -no-undefined"
- build_target="cygwin"
- ;;
-*mingw*)
- AC_DEFINE_UNQUOTED(MINGW,1,[This is a MinGW system])
- AC_DEFINE_UNQUOTED(WINDOWS,1,[This is a Windows system])
- AC_DEFINE_UNQUOTED(_WIN32,1,[This is a Windows system])
- AC_CHECK_LIB(intl, gettext)
- LDFLAGS="$LDFLAGS -no-undefined -Wl,--export-all-symbols -lws2_32"
- CFLAGS="-mms-bitfields $CFLAGS"
- build_target="mingw"
- ;;
-*)
- AC_MSG_RESULT(Unrecognised OS $host_os)
- AC_DEFINE_UNQUOTED(OTHEROS,1,[Some strange OS])
-;;
-esac
-
-AM_CONDITIONAL(MINGW, test "$build_target" = "mingw")
-
-# check for gettext
-AM_GNU_GETTEXT_VERSION([0.18.1])
-AM_GNU_GETTEXT([external])
-
-AC_CHECK_HEADERS([errno.h stdio.h unistd.h locale.h sys/stat.h sys/types.h
langinfo.h libintl.h unistd.h stddef.h argz.h sys/socket.h netinet/in.h
stdarg.h])
-
-# test for GNUnet core
-gnunet=0
-lookin=${prefix}
-backup_LIBS="$LIBS"
-backup_CFLAGS="$CFLAGS "
-backup_CPPFLAGS="$CPPFLAGS"
-GNUNET_CFLAGS=""
-GNUNET_CPPFLAGS=""
-GNUNET_LIBS=""
-AC_MSG_CHECKING(for GNUnet core)
-AC_ARG_WITH(gnunet,
- [ --with-gnunet=PFX Base of GNUnet installation],
- [AC_MSG_RESULT([$with_gnunet])
- case $with_gnunet in
- no)
- lookin=""
- ;;
- yes)
- lookin="${prefix}"
- ;;
- *)
- lookin="$with_gnunet"
- ;;
- esac
- ],
- [
- AC_MSG_RESULT([--with-gnunet not specified])
- PKG_CHECK_MODULES([GNUNET], [gnunetutil >= 0.9.0], gnunet=1)
- ]
-)
-
-if test "x$gnunet" == "x0" -a ! "x$lookin" == "x"
-then
- AC_MSG_CHECKING(for GNUnet util library in $lookin)
- GNUNET_LIBS="-L${lookin}/lib"
- GNUNET_CFLAGS="-I${lookin}/include"
- GNUNET_CPPFLAGS="-I${lookin}/include"
- LIBS="$GNUNET_LIBS $backup_LIBS"
- CFLAGS="$GNUNET_CFLAGS $backup_CFLAGS"
- CPPFLAGS="$GNUNET_CPPFLAGS $backup_CPPFLAGS"
- AC_CHECK_HEADERS([gnunet/gnunet_util_lib.h],
- AC_CHECK_LIB([gnunetutil], [GNUNET_xfree_],
- [
- gnunet=1
- EXT_LIB_PATH="-L${lookin}/lib $EXT_LIB_PATH"
- ]
- ),,[#include <gnunet/platform.h>]
- )
-fi
-
-if test "x$gnunet" == "x0"
-then
- AC_MSG_ERROR([gnunet-gtk requires GNUnet])
-fi
-
-AC_SUBST(GNUNET_CFLAGS)
-AC_SUBST(GNUNET_LIBS)
-LIBS="$backup_LIBS"
-CFLAGS="$backup_CFLAGS"
-CPPFLAGS="$backup_CPPFLAGS"
-
-AC_DEFINE_DIR([PACKAGE_DATA], [datarootdir], [The directory for installing
read-only architecture-independent data])
-
-# Set PACKAGE_SOURCE_DIR in gnunet_gtk_config.h.
-packagesrcdir=`cd $srcdir && pwd`
-AC_DEFINE_UNQUOTED(PACKAGE_SOURCE_DIR, "${packagesrcdir}", [source dir])
-
-AC_OUTPUT([ po/Makefile.in
-Makefile
-src/Makefile
-src/include/Makefile
-src/ext/Makefile
-])
| [Prev in Thread] | Current Thread | [Next in Thread] |