[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r28084 - in gnunet-planetlab/gplmt/contrib/tasklists: . pla
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] r28084 - in gnunet-planetlab/gplmt/contrib/tasklists: . planetlab |
|
Date: |
Tue, 16 Jul 2013 11:55:01 +0200 |
Author: wachs
Date: 2013-07-16 11:55:01 +0200 (Tue, 16 Jul 2013)
New Revision: 28084
Added:
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_extractor.xml
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_gnunet.xml
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_mhd.xml
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_prerequisites.xml
Log:
new splitted planetlab FC8 tasklists
Added:
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_extractor.xml
===================================================================
---
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_extractor.xml
(rev 0)
+++
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_extractor.xml
2013-07-16 09:55:01 UTC (rev 28084)
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Install Extractor on PlanetLab node"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2013</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+ <sequence name="Install libextractor" enabled="true">
+ <run id="101" name="Download libextractor">
+ <command>mkdir libextractor; cd libextractor; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="102" name="Unpack libextractor">
+ <command>cd libextractor; tar -xzvf</command>
+ <arguments>libextractor-0.6.3.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="103" name="Configure libextractor">
+ <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="104" name="Install libextractor">
+ <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+</sequence>
+
+
+</tasklist>
Added:
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_gnunet.xml
===================================================================
---
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_gnunet.xml
(rev 0)
+++
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_gnunet.xml
2013-07-16 09:55:01 UTC (rev 28084)
@@ -0,0 +1,104 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Install GNUnet on PlanetLab node"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2013</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+<sequence name="GNUnet preinstallation and subversion" enabled="false">
+ <run id="30" name="Install dependencies with yum : subversion">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>subversion</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="31" name="Download GNUnet svn certificate">
+ <command>wget --no-check-certificate</command>
+
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="32" name="Install GNUnet svn certificate">
+ <command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <!-- GNUnet preinstallation and subversion end -->
+</sequence>
+
+<sequence name="Install GNUnet from SVN" enabled="false">
+ <run id="131" name="Download GNUnet">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/gnunet</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="132" name="Bootstrap GNUnet" enabled="true">
+ <command>cd gnunet; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="133" name="Configure GNUnet" enabled="true">
+ <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib;
./configure </command>
+ <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr/local
--with-curl=/usr/local --with-mysql=/usr/lib/mysql
--enable-logging=verbose</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="134" name="Install GNUnet">
+ <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib; make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+
+ <sequence name="Postinstallation setup" enabled="false">
+ <run id="141" name="Create GNUnet directory" enabled="true">
+ <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="142" name="Set GNUNET_PREFIX" enabled="true">
+ <command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="143" name="Configure GNUnet" enabled="true">
+ <command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+</sequence>
+</tasklist>
Added:
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_mhd.xml
===================================================================
---
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_mhd.xml
(rev 0)
+++
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_mhd.xml
2013-07-16 09:55:01 UTC (rev 28084)
@@ -0,0 +1,127 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Install MHD on PlanetLab node"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2013</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+ <sequence name="Install mhd depencies from source" enabled="true">
+ <sequence name="Install libnettle" enabled="true">
+ <run id="112" name="Download libnettle">
+ <command>mkdir libnettle; cd libnettle; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="113" name="Unpack libnettle">
+ <command>cd libnettle; tar -xzvf</command>
+ <arguments>nettle-2.5.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="114" name="Configure libnettle">
+ <command>cd libnettle/nettle-2.5; ./configure </command>
+ <arguments></arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="115" name="Build libnettle">
+ <command>cd libnettle/nettle-2.5; make all</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="116" name="Install libnettle">
+ <command>cd libnettle/nettle-2.5; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence name="Install GnuTLS" enabled="true">
+ <run id="117" name="Download GnuTLS">
+ <command>mkdir gnutls; cd gnutls; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="118" name="Unpack gnutls">
+ <command>cd gnutls; tar -xvjf</command>
+ <arguments>gnutls-2.12.20.tar.bz2</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="119" name="Configure gnutls">
+ <command>cd gnutls/gnutls-2.12.20; ./configure</command>
+ <arguments>--without-p11-kit</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="120" name="Install gnutls">
+ <command>cd gnutls/gnutls-2.12.20; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence name="Install mhd" enabled="true">
+ <run id="121" name="Download ">
+ <command>mkdir libmicrohttpd; cd libmicrohttpd; wget
</command>
+
<arguments>ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="122" name="Unpack libmicrohttpd">
+ <command>cd libmicrohttpd; tar -xzvf</command>
+ <arguments>libmicrohttpd-0.9.21.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="123" name="Configure libmicrohttpd">
+ <command>cd libmicrohttpd/libmicrohttpd-0.9.21;
./configure </command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="124" name="Install libmicrohttpd">
+ <command>cd libmicrohttpd/libmicrohttpd-0.9.21; sudo
make install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <!-- mhd end -->
+ </sequence>
+ </sequence>
+</tasklist>
Added:
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_prerequisites.xml
===================================================================
---
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_prerequisites.xml
(rev 0)
+++
gnunet-planetlab/gplmt/contrib/tasklists/planetlab/planetlab_install_prerequisites.xml
2013-07-16 09:55:01 UTC (rev 28084)
@@ -0,0 +1,359 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Install GNUnet prerequisistes on PlanetLab node"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="../../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2013</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+
+
+ <sequence name="Install buildtools" enabled="true">
+ <run id="11" name="Install dependencies with yum : gcc">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gcc</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="12" name="Install dependencies with yum : make">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>make</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="13" name="Install dependencies with yum : automake">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>automake</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="14" name="Install dependencies with yum : autoconf">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>autoconf</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="15" name="Install dependencies with yum :
gettext-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gettext-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="16" name="Install dependencies with yum : texinfo">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>texinfo</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="17" name="Install dependencies with yum : zlib-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>zlib-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="18" name="Install dependencies with yum :
libgtop-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgtop-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <!-- buildtools end -->
+ </sequence>
+
+
+
+ <sequence name="Install dependencies" enabled="true">
+ <run id="21" name="Install dependencies with yum : gnutls-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gnutls-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="21" name="Install dependencies with yum : libidn-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libidn-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="22" name="Install dependencies with yum :
libgcrypt-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgcrypt-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="23" name="Install dependencies with yum : sqlite-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>sqlite-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="24" name="Install dependencies with yum : postgresql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>postgresql-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="25" name="Install dependencies with yum : mysql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>mysql-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="26" name="Install dependencies with yum : libgsf-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgsf-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="27" name="Install dependencies with yum : libvorbis-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libvorbis-devel</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <!-- dependencies end -->
+ </sequence>
+
+ <sequence name="Install gpg-error" enabled="true">
+ <run id="61" name="Download libgpg-error">
+ <command>mkdir libgpg-error; cd libgpg-error; wget </command>
+
<arguments>ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.11.tar.bz2</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="62" name="Unpack libgpg-error">
+ <command>cd libgpg-error; tar -xjvf</command>
+ <arguments>libgpg-error-1.11.tar.bz2</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="63" name="Configure libgpg-error">
+ <command>cd libgpg-error/libgpg-error-1.11; ./configure </command>
+ <arguments>--prefix=/usr</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="64" name="Install libgpg-error">
+ <command>cd libgpg-error/libgpg-error-1.11; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+
+ <sequence name="Remove outdated packages" enabled="false">
+ <run id="91" name="Remove conflicting packages : libgcrypt">
+ <command>sudo rpm -e --nodeps</command>
+ <arguments>libgcrypt</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="91" name="Remove conflicting packages : libgpg-error">
+ <command>sudo rpm -e --nodeps</command>
+ <arguments>libgpg-error</arguments>
+ <timeout>150</timeout>
+ <!-- Return code can be 0 if package was installed and 1 if not -->
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence name="Install mhd depencies from source" enabled="false">
+ <!-- Install libnettle required for GnuTLS-->
+ <run id="112" name="Download libnettle">
+ <command>mkdir libnettle; cd libnettle; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="113" name="Unpack libnettle">
+ <command>cd libnettle; tar -xzvf</command>
+ <arguments>nettle-2.5.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="114" name="Configure libnettle">
+ <command>cd libnettle/nettle-2.5; ./configure </command>
+ <arguments></arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="115" name="Build libnettle">
+ <command>cd libnettle/nettle-2.5; make all</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="116" name="Install libnettle">
+ <command>cd libnettle/nettle-2.5; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <!-- Install GnuTLS for MHD -->
+ <run id="117" name="Download GnuTLS">
+ <command>mkdir gnutls; cd gnutls; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="118" name="Unpack gnutls">
+ <command>cd gnutls; tar -xvjf</command>
+ <arguments>gnutls-2.12.20.tar.bz2</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="119" name="Configure gnutls">
+ <command>cd gnutls/gnutls-2.12.20; ./configure</command>
+ <arguments>--without-p11-kit</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="120" name="Install gnutls">
+ <command>cd gnutls/gnutls-2.12.20; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence name="Install mhd" enabled="false">
+ <run id="121" name="Download ">
+ <command>mkdir libmicrohttpd; cd libmicrohttpd; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="122" name="Unpack libmicrohttpd">
+ <command>cd libmicrohttpd; tar -xzvf</command>
+ <arguments>libmicrohttpd-0.9.21.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="123" name="Configure libmicrohttpd">
+ <command>cd libmicrohttpd/libmicrohttpd-0.9.21; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="124" name="Install libmicrohttpd">
+ <command>cd libmicrohttpd/libmicrohttpd-0.9.21; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <!-- mhd end -->
+ </sequence>
+
+ <sequence name="Install libextractor" enabled="false">
+ <run id="101" name="Download libextractor">
+ <command>mkdir libextractor; cd libextractor; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="102" name="Unpack libextractor">
+ <command>cd libextractor; tar -xzvf</command>
+ <arguments>libextractor-0.6.3.tar.gz</arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="103" name="Configure libextractor">
+ <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="104" name="Install libextractor">
+ <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>150</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+
+</tasklist>
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r28084 - in gnunet-planetlab/gplmt/contrib/tasklists: . planetlab,
gnunet <=