[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] [taler-deployment] branch master updated (06f2e37 -> 8d7edc
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] [taler-deployment] branch master updated (06f2e37 -> 8d7edcf) |
|
Date: |
Sat, 04 Nov 2017 11:01:24 +0100 |
This is an automated email from the git hooks/post-receive script.
marcello pushed a change to branch master
in repository deployment.
from 06f2e37 pylint builder in doc and shortening the doc.
new 9527aee pylint worker
new 8d7edcf indent
The 2 revisions listed above as "new" are entirely new to this
repository and will be described in separate emails. The revisions
listed as "add" were already present in the repository and have only
been added to this reference.
Summary of changes:
buildbot/master.cfg | 427 +++++++++++++++++++++++++++++++---------------------
doc/onboarding.texi | 2 +-
2 files changed, 255 insertions(+), 174 deletions(-)
diff --git a/buildbot/master.cfg b/buildbot/master.cfg
index 42a4155..b525fd2 100644
--- a/buildbot/master.cfg
+++ b/buildbot/master.cfg
@@ -18,19 +18,23 @@ c["buildbotNetUsageData"] = "basic"
# The 'workers' list defines the set of recognized workers. Each element is
# a Worker object, specifying a unique worker name and password. The same
# worker name and password must be configured on the worker.
-c["workers"] = [worker.Worker("lcov-worker", "lcov-pass"),
- worker.Worker("selenium-worker", "selenium-pass"),
- worker.Worker("doc-worker", "doc-pass"),
- worker.Worker("switcher-worker", "switcher-pass"),
- worker.Worker("debug-worker", "debug-pass"),
- worker.Worker("wallet-worker", "wallet-pass")]
+c["workers"] = [
+ worker.Worker("lcov-worker", "lcov-pass"),
+ worker.Worker("selenium-worker", "selenium-pass"),
+ worker.Worker("doc-worker", "doc-pass"),
+ worker.Worker("switcher-worker", "switcher-pass"),
+ worker.Worker("debug-worker", "debug-pass"),
+ worker.Worker("lint-worker", "lint-pass"),
+ worker.Worker("wallet-worker", "wallet-pass")]
# 'protocols' contains information about protocols which master will use for
# communicating with workers. You must define at least 'port' option that
workers
# could connect to your master with this protocol.
# 'port' must match the value configured into the workers (with their
# --master option)
-c["protocols"] = {"pb": {"port": "tcp:9989:interface=127.0.0.1"}}
+c["protocols"] = {
+ "pb": {
+ "port": "tcp:9989:interface=127.0.0.1"}}
####### CHANGESOURCES
@@ -47,48 +51,71 @@ c["change_source"] = [allcs]
# Configure the Schedulers, which decide how to react to incoming changes.
# Re-build documentation periodically
+
doc_scheduler = schedulers.SingleBranchScheduler(
- name="periodic-doc-scheduler",
- builderNames=["doc-builder"],
- #FIXME, this way we build components' manuals only if 'api' or 'www'
get pushed.
- change_filter=util.ChangeFilter(branch="master", project_re="api|www"),
- treeStableTimer=None)
+ name="periodic-doc-scheduler",
+ builderNames=["doc-builder"],
+ change_filter=util.ChangeFilter(
+ branch="master",
+ project_re="api|www"),
+ treeStableTimer=None)
wallet_scheduler = schedulers.SingleBranchScheduler(
- name="wallet-scheduler",
- change_filter=util.ChangeFilter(branch="master",
project_re="wallet|deployment"),
- treeStableTimer=None,
- builderNames=["wallet-builder"])
+ name="wallet-scheduler",
+ change_filter=util.ChangeFilter(
+ branch="master",
+ project_re="wallet|deployment"),
+ treeStableTimer=None,
+ builderNames=["wallet-builder"])
all_scheduler = schedulers.SingleBranchScheduler(
- name="all-scheduler",
- change_filter=util.ChangeFilter(branch="master",
project_re="wallet|bank|exchange|merchant|deployment"),
- treeStableTimer=None,
- builderNames=[
- "lcov-builder",
- "selenium-builder",
- "switcher-builder",
- "wallet-builder"])
+ name="all-scheduler",
+ change_filter=util.ChangeFilter(
+ branch="master",
+ project_re="wallet|bank|exchange|merchant|deployment"),
+ treeStableTimer=None,
+ builderNames=[
+ "lcov-builder",
+ "selenium-builder",
+ "switcher-builder",
+ "wallet-builder"])
# Scheduler monitoring the help.git repo; a forgotten repo we
# use to test BB.
debug_scheduler = schedulers.SingleBranchScheduler(
- name="debug-scheduler",
- change_filter=util.ChangeFilter(branch="master", project="help"),
- treeStableTimer=None,
- builderNames=["debug-builder"])
+ name="debug-scheduler",
+ change_filter=util.ChangeFilter(
+ branch="master",
+ project="help"),
+ treeStableTimer=None,
+ builderNames=["debug-builder"])
+
+# Consider adding other Python parts, like the various frontends.
+lint_scheduler = schedulers.SingleBranchScheduler(
+ name="lint-scheduler",
+ change_filter=util.ChangeFilter(
+ branch="master",
+ project_re="bank"),
+ treeStableTimer=None,
+ builderNames=["lint-builder"])
# Provide "force" button in the web UI
force_scheduler = schedulers.ForceScheduler(
- name="force-scheduler",
- builderNames=[
- "lcov-builder",
- "selenium-builder",
- "switcher-builder",
- "doc-builder",
- "wallet-builder"])
-
-c["schedulers"] = [doc_scheduler, wallet_scheduler, all_scheduler,
force_scheduler, debug_scheduler]
+ name="force-scheduler",
+ builderNames=[
+ "lcov-builder",
+ "selenium-builder",
+ "switcher-builder",
+ "doc-builder",
+ "wallet-builder"])
+
+c["schedulers"] = [
+ doc_scheduler,
+ wallet_scheduler,
+ all_scheduler,
+ force_scheduler,
+ debug_scheduler,
+ lint_scheduler]
####### BUILDERS
@@ -103,147 +130,190 @@ from buildbot.steps.source.git import Git
from buildbot.steps.shell import ShellCommand
wallet_factory = util.BuildFactory()
-
-wallet_factory.addStep(Git(repourl="git://git.taler.net/wallet-webex.git",
- mode="full",
- method="fresh",
- logEnviron=False,
- alwaysUseLatest=True,
- haltOnFailure=True,
- branch="master"))
-
-wallet_factory.addStep(ShellCommand(name="configuration",
- description="Running configure script",
- descriptionDone="Correctly configured",
- command=["./configure"],
- workdir="build/"))
-
-wallet_factory.addStep(ShellCommand(name="test",
- description="Running wallet tests",
- descriptionDone="Test correctly run",
- command=["make", "check"],
- workdir="build/"))
+wallet_factory.addStep(Git(
+ repourl="git://git.taler.net/wallet-webex.git",
+ mode="full",
+ method="fresh",
+ logEnviron=False,
+ alwaysUseLatest=True,
+ haltOnFailure=True,
+ branch="master"))
+wallet_factory.addStep(ShellCommand(
+ name="configuration",
+ description="Running configure script",
+ descriptionDone="Correctly configured",
+ command=["./configure"],
+ workdir="build/"))
+wallet_factory.addStep(ShellCommand(
+ name="test",
+ description="Running wallet tests",
+ descriptionDone="Test correctly run",
+ command=["make", "check"],
+ workdir="build/"))
debug_factory = util.BuildFactory()
-debug_factory.addStep(ShellCommand(name="echo debug",
- description="just echoing a word",
- descriptionDone="builder responded",
- command=["echo", "I'm here!"]))
+debug_factory.addStep(ShellCommand(
+ name="echo debug",
+ description="just echoing a word",
+ descriptionDone="builder responded",
+ command=["echo", "I'm here!"]))
+
+lint_factory = util.BuildFactory()
+lint_factory.addStep(Git(
+ repourl='git://git.taler.net/bank.git',
+ mode="full",
+ method="fresh",
+ logEnviron=False,
+ alwaysUseLatest=True,
+ haltOnFailure=True,
+ branch="master"))
+lint_factory.addStep(ShellCommand(
+ name="code linter",
+ description="running static analysis",
+ descriptionDone="static analysis done",
+ command=["pylint",
+ "--load_plugins",
+ "pylint_django",
+ "talerbank/"]))
lcov_factory = util.BuildFactory()
-
-lcov_factory.addStep(Git(repourl='git://git.taler.net/deployment.git',
- mode="full",
- method='fresh',
- logEnviron=False,
- alwaysUseLatest=True,
- haltOnFailure=True,
- branch='master'))
-lcov_factory.addStep(ShellCommand(name="invalidation",
- description="Invalidating timestamps",
- descriptionDone="timestamps invalidated",
- command=["./invalidate.sh"],
- workdir="build/taler-build"))
-lcov_factory.addStep(ShellCommand(name="build",
- description="Compiling..",
- descriptionDone="lcov files generated",
- command=["make", "lcov"],
- workdir="build/taler-build",
- env={"PATH": "${HOME}/local/bin:${PATH}",
- "TALER_CHECKDB":
"postgresql:///talercheck?host=/home/${USER}/sockets"}))
+lcov_factory.addStep(Git(
+ repourl='git://git.taler.net/deployment.git',
+ mode="full",
+ method='fresh',
+ logEnviron=False,
+ alwaysUseLatest=True,
+ haltOnFailure=True,
+ branch='master'))
+lcov_factory.addStep(ShellCommand(
+ name="invalidation",
+ description="Invalidating timestamps",
+ descriptionDone="timestamps invalidated",
+ command=["./invalidate.sh"],
+ workdir="build/taler-build"))
+lcov_factory.addStep(ShellCommand(
+ name="build",
+ description="Compiling..",
+ descriptionDone="lcov files generated",
+ command=["make", "lcov"],
+ workdir="build/taler-build",
+ env={"PATH": "${HOME}/local/bin:${PATH}",
+ "TALER_CHECKDB":
"postgresql:///talercheck?host=/home/${USER}/sockets"}))
switcher_factory = util.BuildFactory()
-switcher_factory.addStep(Git(repourl='git://git.taler.net/deployment.git',
- mode="full",
- method="fresh",
- logEnviron=False,
- alwaysUseLatest=True,
- haltOnFailure=True,
- branch="master"))
-switcher_factory.addStep(ShellCommand(name="build",
- description="Building inactive blue-green
party.",
- descriptionDone="Compile.",
- command=["./build.sh"],
- workdir="build/buildbot"))
-switcher_factory.addStep(ShellCommand(name="restart services",
- description="Restarting inactive blue-green
party.",
- descriptionDone="Restarting Taler.",
- command=["./restart.sh"],
- workdir="build/buildbot"))
-switcher_factory.addStep(ShellCommand(name="check services correctly
restarted",
- description="Checking services are correctly
restarted.",
- descriptionDone="All services are correctly
restarted.",
- command=["./checks.sh"],
- workdir="build/buildbot"))
-switcher_factory.addStep(ShellCommand(name="switch active party",
- description="Switch to the party which was
inactive.",
- descriptionDone="Active party has been
switched.",
- command=["./switch.sh"],
- workdir="build/buildbot"))
+switcher_factory.addStep(Git(
+ repourl='git://git.taler.net/deployment.git',
+ mode="full",
+ method="fresh",
+ logEnviron=False,
+ alwaysUseLatest=True,
+ haltOnFailure=True,
+ branch="master"))
+switcher_factory.addStep(ShellCommand(
+ name="build",
+ description="Building inactive blue-green party.",
+ descriptionDone="Compile.",
+ command=["./build.sh"],
+ workdir="build/buildbot"))
+switcher_factory.addStep(ShellCommand(
+ name="restart services",
+ description="Restarting inactive blue-green party.",
+ descriptionDone="Restarting Taler.",
+ command=["./restart.sh"],
+ workdir="build/buildbot"))
+switcher_factory.addStep(ShellCommand(
+ name="check services correctly restarted",
+ description="Checking services are correctly restarted.",
+ descriptionDone="All services are correctly restarted.",
+ command=["./checks.sh"],
+ workdir="build/buildbot"))
+switcher_factory.addStep(ShellCommand(
+ name="switch active party",
+ description="Switch to the party which was inactive.",
+ descriptionDone="Active party has been switched.",
+ command=["./switch.sh"],
+ workdir="build/buildbot"))
+
selenium_factory = util.BuildFactory()
-selenium_factory.addStep(ShellCommand(name="selenium",
- description="Headless browser test",
- descriptionDone="Test finished",
- command=["launch_selenium_test"],
- env={'PATH':
"${HOME}/local/bin:/usr/lib/chromium:${PATH}"}))
+selenium_factory.addStep(ShellCommand(
+ name="selenium",
+ description="Headless browser test",
+ descriptionDone="Test finished",
+ command=["launch_selenium_test"],
+ env={'PATH': "${HOME}/local/bin:/usr/lib/chromium:${PATH}"}))
# this factory builds {api,docs}.taler.net AND {www,stage}.taler.net
doc_factory = util.BuildFactory()
-
-doc_factory.addStep(Git(repourl="git://git.taler.net/deployment.git",
- mode="full",
- method="fresh",
- logEnviron=False,
- alwaysUseLatest=True,
- haltOnFailure=True,
- branch='master'))
-doc_factory.addStep(ShellCommand(name="build docs",
- description="Building documentation.",
- descriptionDone="Documentation built.",
- command=["./update_docs.sh"],
- workdir="build/taler-build"))
-doc_factory.addStep(ShellCommand(name="build www",
- description="Building www.taler.net.",
- descriptionDone="www.taler.net built",
- command=["./update_www.sh"],
- workdir="build/taler-build"))
-doc_factory.addStep(ShellCommand(name="build www-stage",
- description="Building stage.taler.net.",
- descriptionDone="stage.taler.net built",
- command=["./update_stage.sh"],
- workdir="build/taler-build"))
+doc_factory.addStep(Git(
+ repourl="git://git.taler.net/deployment.git",
+ mode="full",
+ method="fresh",
+ logEnviron=False,
+ alwaysUseLatest=True,
+ haltOnFailure=True,
+ branch='master'))
+doc_factory.addStep(ShellCommand(
+ name="build docs",
+ description="Building documentation.",
+ descriptionDone="Documentation built.",
+ command=["./update_docs.sh"],
+ workdir="build/taler-build"))
+doc_factory.addStep(ShellCommand(
+ name="build www",
+ description="Building www.taler.net.",
+ descriptionDone="www.taler.net built",
+ command=["./update_www.sh"],
+ workdir="build/taler-build"))
+doc_factory.addStep(ShellCommand(
+ name="build www-stage",
+ description="Building stage.taler.net.",
+ descriptionDone="stage.taler.net built",
+ command=["./update_stage.sh"],
+ workdir="build/taler-build"))
debug_builder = util.BuilderConfig(
- name="debug-builder",
- workernames=["debug-worker"],
- factory=debug_factory)
+ name="debug-builder",
+ workernames=["debug-worker"],
+ factory=debug_factory)
+
+lint_builder = util.BuilderConfig(
+ name="lint-builder",
+ workernames=["lint-worker"],
+ factory=lint_factory)
lcov_builder = util.BuilderConfig(
- name="lcov-builder",
- workernames=["lcov-worker"],
- factory=lcov_factory)
+ name="lcov-builder",
+ workernames=["lcov-worker"],
+ factory=lcov_factory)
switcher_builder = util.BuilderConfig(
- name="switcher-builder",
- workernames=["switcher-worker"],
- factory=switcher_factory)
+ name="switcher-builder",
+ workernames=["switcher-worker"],
+ factory=switcher_factory)
selenium_builder = util.BuilderConfig(
- name="selenium-builder",
- workernames=["selenium-worker"],
- factory=selenium_factory)
+ name="selenium-builder",
+ workernames=["selenium-worker"],
+ factory=selenium_factory)
doc_builder = util.BuilderConfig(
- name="doc-builder",
- workernames=["doc-worker"],
- factory=doc_factory)
+ name="doc-builder",
+ workernames=["doc-worker"],
+ factory=doc_factory)
wallet_builder = util.BuilderConfig(
- name="wallet-builder",
- workernames=["wallet-worker"],
- factory=wallet_factory)
-
-c["builders"] = [lcov_builder, switcher_builder, selenium_builder,
doc_builder, wallet_builder, debug_builder]
+ name="wallet-builder",
+ workernames=["wallet-worker"],
+ factory=wallet_factory)
+
+c["builders"] = [
+ lcov_builder,
+ switcher_builder,
+ selenium_builder,
+ doc_builder,
+ wallet_builder,
+ debug_builder,
+ lint_builder]
####### BUILDBOT SERVICES
@@ -252,20 +322,28 @@ c["builders"] = [lcov_builder, switcher_builder,
selenium_builder, doc_builder,
# has a variety to choose from, like IRC bots.
from buildbot.plugins import reporters
-irc = reporters.IRC("irc.eu.freenode.net", "taler-bb",
- useColors=False,
- channels=[{"channel": "#taler"}],
- password="taler-bb-pass19",
- notify_events={'exception': 1, 'successToFailure': 1,
'failureToSuccess': 1})
-email = reporters.MailNotifier(fromaddr="address@hidden",
- sendToInterestedUsers=False,
- mode=("problem"),
- builders=("switcher-builder",
- "doc-builder",
- "wallet-builder",
- "selenium-builder"),
- extraRecipients=["address@hidden"],
- subject="Taler build.")
+irc = reporters.IRC(
+ "irc.eu.freenode.net",
+ "taler-bb",
+ useColors=False,
+ channels=[{"channel": "#taler"}],
+ password="taler-bb-pass19",
+ notify_events={
+ 'exception': 1,
+ 'successToFailure': 1,
+ 'failureToSuccess': 1})
+
+email = reporters.MailNotifier(
+ fromaddr="address@hidden",
+ sendToInterestedUsers=False,
+ mode=("problem"),
+ builders=(
+ "switcher-builder",
+ "doc-builder",
+ "wallet-builder",
+ "selenium-builder"),
+ extraRecipients=["address@hidden"],
+ subject="Taler build.")
c["services"] = [irc, email]
@@ -278,9 +356,12 @@ c["titleURL"] = "https://taler.net";
c["buildbotURL"] = "https://buildbot.taler.net/";
# minimalistic config to activate new web UI
-c["www"] = dict(port=8010,
- plugins=dict(waterfall_view={}, console_view={}),
- allowed_origins=["https://*.taler.net";])
+c["www"] = {
+ "port": 8010,
+ "plugins" : {
+ "waterfall_view": {},
+ "console_view":{}},
+ "allowed_origins": ["https://*.taler.net"]}
####### DB URL
diff --git a/doc/onboarding.texi b/doc/onboarding.texi
index 4c31304..de520ad 100644
--- a/doc/onboarding.texi
+++ b/doc/onboarding.texi
@@ -146,7 +146,7 @@ is not needed by any production codebase.
@subsection Python linter
This worker is responsible for running Python static analysis, and it
-is served by the user @code{pylinter}.
+is served by the user @code{linter}.
@subsection Documentation worker
--
To stop receiving notification emails like this one, please contact
address@hidden
- [GNUnet-SVN] [taler-deployment] branch master updated (06f2e37 -> 8d7edcf),
gnunet <=