[GNUnet-SVN] [gnunet] branch master updated: gnunet-identity.1, gnunet-namestore.1: unescape dashes where they create double dashes.

[gnunet]

This is an automated email from the git hooks/post-receive script.

ng0 pushed a commit to branch master
in repository gnunet.

The following commit(s) were added to refs/heads/master by this push:
     new cebb6b31b gnunet-identity.1,gnunet-namestore.1: unescape dashes where 
they create double dashes.
cebb6b31b is described below

commit cebb6b31b858945b1ef091fac50774012cff986e
Author: ng0 <address@hidden>
AuthorDate: Fri Jun 14 18:39:23 2019 +0000

    gnunet-identity.1,gnunet-namestore.1: unescape dashes where they create
    double dashes.
---
 doc/man/gnunet-identity.1  | 38 +++++++++++------------
 doc/man/gnunet-namestore.1 | 76 +++++++++++++++++++++++-----------------------
 2 files changed, 57 insertions(+), 57 deletions(-)

diff --git a/doc/man/gnunet-identity.1 b/doc/man/gnunet-identity.1
index fba649e8d..9aa48ea4c 100644
--- a/doc/man/gnunet-identity.1
+++ b/doc/man/gnunet-identity.1
@@ -29,16 +29,16 @@
 .Nd create, delete or list egos
 .Sh SYNOPSIS
 .Nm
-.Op Fl C Ar NAME | Fl \-create= Ns Ar NAME
-.Op Fl D Ar NAME | Fl \-delete= Ns Ar NAME
-.Op Fl d | \-display
-.Op Fl e Ar NAME | Fl \-ego= Ns Ar NAME
-.Op Fl h | \-help
-.Op Fl m | \-monitor
+.Op Fl C Ar NAME | Fl -create= Ns Ar NAME
+.Op Fl D Ar NAME | Fl -delete= Ns Ar NAME
+.Op Fl d | -display
+.Op Fl e Ar NAME | Fl -ego= Ns Ar NAME
+.Op Fl h | -help
+.Op Fl m | -monitor
 .Op Fl p | \-private-keys
-.Op Fl q | \-quiet
-.Op Fl s Ar SUBSYSTEM | Fl \-set= Ns Ar SUBSYSTEM
-.Op Fl V | \-verbose
+.Op Fl q | -quiet
+.Op Fl s Ar SUBSYSTEM | Fl -set= Ns Ar SUBSYSTEM
+.Op Fl V | -verbose
 .Sh DESCRIPTION
 .Nm
 is a tool for managing egos.
@@ -58,29 +58,29 @@ This identifier is only used locally for this peer and not 
shared
 with other peers.
 The options are as follows:
 .Bl -tag -width indent
-.It Fl C Ar NAME | Fl \-create= Ns Ar NAME
+.It Fl C Ar NAME | Fl -create= Ns Ar NAME
 Creates a new ego with the given
 .Ar NAME .
-.It Fl D Ar NAME | Fl \-delete= Ns Ar NAME
+.It Fl D Ar NAME | Fl -delete= Ns Ar NAME
 Delete the ego with the given
 .Ar NAME .
-.It Fl d | \-display
+.It Fl d | -display
 Display all of our egos.
-.It Fl e Ar NAME | Fl \-ego= Ns Ar NAME
+.It Fl e Ar NAME | Fl -ego= Ns Ar NAME
 Perform "set" operation with the respective ego or restrict "display"
 operation to the respective ego.
-.It Fl h | \-help
+.It Fl h | -help
 Print the help page.
-.It Fl m | \-monitor
+.It Fl m | -monitor
 Run in monitor mode, listing all ouf our egos until CTRL-C is pressed.
 Each ego is listed together with a unique pointer value; if
 egos are renamed, that pointer value remains the same,
 if egos are deleted, they are listed one more time with a name of "<null>".
-.It Fl p | \-private-keys
+.It Fl p | -private-keys
 Print the private keys (in Crockford Base32 encoding), and not just the public 
keys.
-.It Fl q | \-quiet
+.It Fl q | -quiet
 Be quiet, in particular outputs only the public key when listing egos.
-.It Fl s Ar SUBSYSTEM | Fl \-set= Ns Ar SUBSYSTEM
+.It Fl s Ar SUBSYSTEM | Fl -set= Ns Ar SUBSYSTEM
 Perform "set" operation for the specified
 .Ar SUBSYSTEM
 with the respective ego.
@@ -90,7 +90,7 @@ After this, the given SUBSYSTEM will use the ego with the 
specified NAME.
 This will fail if
 .Ar NAME
 does not yet exist.
-.It Fl V | \-verbose
+.It Fl V | -verbose
 Be verbose, in particular outputs the public key of freshly created egos.
 .El
 .Sh FILES
diff --git a/doc/man/gnunet-namestore.1 b/doc/man/gnunet-namestore.1
index 7f6e0bcb6..0fbb6a480 100644
--- a/doc/man/gnunet-namestore.1
+++ b/doc/man/gnunet-namestore.1
@@ -30,81 +30,81 @@
 manipulate GNU Name System (GNS) zone data
 .Sh SYNOPSIS
 .Nm
-.Op Fl a | \-add
-.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
-.Op Fl d | \-delete
-.Op Fl D | \-display
-.Op Fl e Ar TIME | Fl \-expiration= Ns Ar TIME
-.Op Fl h | \-help
-.Op Fl i Ar NICKNAME | Fl \-nick= Ns Ar NICKNAME
-.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
-.Op Fl m | \-monitor
-.Op Fl n Ar NAME | Fl \-name= Ns Ar NAME
-.Op Fl p | \-public
-.Op Fl r Ar PKEY | Fl \-reverse= Ns Ar PKEY
-.Op Fl R Ar RECORDLINE | Fl \-replace= Ns Ar RECORDLINE
-.Op Fl s | \-shadow
-.Op Fl t Ar TYPE | Fl \-type= Ns Ar TYPE
-.Op Fl u Ar URI | Fl \-uri= Ns Ar URI
-.Op Fl v | \-version
-.Op Fl V Ar VALUE | Fl \-value= Ns Ar VALUE
-.Op Fl z Ar EGO | Fl \-zone= Ns Ar EGO
+.Op Fl a | -add
+.Op Fl c Ar FILENAME | Fl -config= Ns Ar FILENAME
+.Op Fl d | -delete
+.Op Fl D | -display
+.Op Fl e Ar TIME | Fl -expiration= Ns Ar TIME
+.Op Fl h | -help
+.Op Fl i Ar NICKNAME | Fl -nick= Ns Ar NICKNAME
+.Op Fl L Ar LOGLEVEL | Fl -loglevel= Ns Ar LOGLEVEL
+.Op Fl m | -monitor
+.Op Fl n Ar NAME | Fl -name= Ns Ar NAME
+.Op Fl p | -public
+.Op Fl r Ar PKEY | Fl -reverse= Ns Ar PKEY
+.Op Fl R Ar RECORDLINE | Fl -replace= Ns Ar RECORDLINE
+.Op Fl s | -shadow
+.Op Fl t Ar TYPE | Fl -type= Ns Ar TYPE
+.Op Fl u Ar URI | Fl -uri= Ns Ar URI
+.Op Fl v | -version
+.Op Fl V Ar VALUE | Fl -value= Ns Ar VALUE
+.Op Fl z Ar EGO | Fl -zone= Ns Ar EGO
 .Sh DESCRIPTION
 .Nm
 can be used to manipulate records in a GNS zone.
 .Pp
 The options are as follows:
 .Bl -tag -width indent
-.It Fl a | \-add
+.It Fl a | -add
 Desired operation is adding a record.
-.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.It Fl c Ar FILENAME | Fl -config= Ns Ar FILENAME
 Use the configuration file FILENAME.
-.It Fl d | \-delete
+.It Fl d | -delete
 Desired operation is deleting records under the given name that match the 
specified type (\-t) and value (\-V).
 If type or value are not specified, it means that all types (or values) should 
be assumed to match (and possibly multiple or all values under the given label 
will be deleted).
 Specifying a label (\-n) is mandatory.
 Note that matching by expiration time or flags is (currently) not supported.
-.It Fl D | \-display
+.It Fl D | -display
 Desired operation is listing of matching records.
-.It Fl e Ar TIME | Fl \-expiration= Ns Ar TIME
+.It Fl e Ar TIME | Fl -expiration= Ns Ar TIME
 Specifies expiration time of record to add; format is relative time, i.e "1 h" 
or "7 d 30 m".
 Supported units are "ms", "s", "min" or "minutes", "h" (hours), "d" (days) and 
"a" (years).
-.It Fl h | \-help
+.It Fl h | -help
 Print short help on options.
-.It Fl i Ar NICKNAME | Fl \-nick= Ns Ar NICKNAME
+.It Fl i Ar NICKNAME | Fl -nick= Ns Ar NICKNAME
 Set the desired NICKNAME for the zone.
 The nickname will be included in all (public) records and used as the 
suggested name for this zone.
-.It Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+.It Fl L Ar LOGLEVEL | Fl -loglevel= Ns Ar LOGLEVEL
 Use LOGLEVEL for logging.
 Valid values are DEBUG, INFO, WARNING and ERROR.
-.It Fl m | \-monitor
+.It Fl m | -monitor
 Monitor changes to the zone on an ongoing basis (in contrast to \-D, which 
merely displays the current records).
-.It Fl n Ar NAME | Fl \-name= Ns Ar NAME
+.It Fl n Ar NAME | Fl -name= Ns Ar NAME
 Label or name of the record to add/delete/display.
-.It Fl p | \-public
+.It Fl p | -public
 Create a record that is public (shared with other users that know the label).
-.It Fl r Ar PKEY | Fl \-reverse= Ns Ar PKEY
+.It Fl r Ar PKEY | Fl -reverse= Ns Ar PKEY
 Determine our GNS name for the given public key (reverse lookup of the PKEY) 
in the given zone.
-.It Fl R Ar RECORDLINE | Fl \-replace= Ns Ar RECORDLINE
+.It Fl R Ar RECORDLINE | Fl -replace= Ns Ar RECORDLINE
 Sets record set to values given in RECORDLINE.
 This option can be specified multiple times to provide multiple records for 
the record set.
 Existing records under the same label will be deleted.
 The format for the RECORDLINE is "TTL TYPE FLAGS VALUE" where TTL is the time 
to live in seconds (unit must not be given explicitly, seconds is always 
implied), TYPE is the DNS/GNS record type, FLAGS is "(N)ORMAL", "(S)HADOW" or 
"(P)UBLIC".
 The VALUE follows the usual human-readable value format(s) of DNS/GNS.
-.It Fl s | \-shadow
+.It Fl s | -shadow
 Create a record that is a shadow record.
 Shadow records are only used once all other records of the same type under the 
same label have expired.
-.It Fl t Ar TYPE | Fl \-type= Ns Ar TYPE
+.It Fl t Ar TYPE | Fl -type= Ns Ar TYPE
 Type of the record to add/delete/display (i.e. "A", "AAAA", "NS", "PKEY", "MX" 
etc.).
-.It Fl u Ar URI | Fl \-uri= Ns Ar URI
+.It Fl u Ar URI | Fl -uri= Ns Ar URI
 Add PKEY record from gnunet://gns/-URI to our zone; the record type is always 
PKEY, if no expiration is given FOREVER is used
-.It Fl v | \-version
+.It Fl v | -version
 Print GNUnet version number.
-.It Fl V Ar VALUE | Fl \-value= Ns Ar VALUE
+.It Fl V Ar VALUE | Fl -value= Ns Ar VALUE
 Value to store or remove from the GNS zone.
 Specific format depends on the record type.
 A records expect a dotted decimal IPv4 address, AAAA records an IPv6 address, 
PKEY a public key in GNUnet's printable format, and CNAME and NS records should 
be a domain name.
-.It Fl z Ar EGO | Fl \-zone= Ns Ar EGO
+.It Fl z Ar EGO | Fl -zone= Ns Ar EGO
 Specifies the name of the ego controlling the private key for the zone. If not 
provided, we will attempt to use the default identity set for the "namestore". 
Alternatively, a private key may be passed in Base32-encoding using the 
GNUNET_NAMESTORE_EGO_PRIVATE_KEY environment variable. The latter is useful to 
improve performance of tools like Ascension as it allows the command to skip 
IPC with the identity management subsystem.
 .El
 .\".Sh EXAMPLES

-- 
To stop receiving notification emails like this one, please contact
address@hidden.