[taler-exchange] branch master updated: remove TALER_TESTING_cmd_admin_add_incoming_with_instance and TALER_EXCHANGE_refund2

[gnunet]

This is an automated email from the git hooks/post-receive script.

jonathan-buchanan pushed a commit to branch master
in repository exchange.

The following commit(s) were added to refs/heads/master by this push:
     new c24a18e1 remove TALER_TESTING_cmd_admin_add_incoming_with_instance and 
TALER_EXCHANGE_refund2
c24a18e1 is described below

commit c24a18e1a50a85a9fd216c02529d9ca07de033e5
Author: Jonathan Buchanan <jonathan.russ.buchanan@gmail.com>
AuthorDate: Thu Jul 23 16:19:02 2020 -0400

    remove TALER_TESTING_cmd_admin_add_incoming_with_instance and 
TALER_EXCHANGE_refund2
---
 src/include/taler_exchange_service.h               |  44 ---------
 src/include/taler_testing_lib.h                    |  28 ------
 src/lib/exchange_api_refund.c                      |  58 +----------
 .../testing_api_cmd_bank_admin_add_incoming.c      | 106 +--------------------
 4 files changed, 7 insertions(+), 229 deletions(-)

diff --git a/src/include/taler_exchange_service.h 
b/src/include/taler_exchange_service.h
index 6c5889ff..9c342a33 100644
--- a/src/include/taler_exchange_service.h
+++ b/src/include/taler_exchange_service.h
@@ -961,50 +961,6 @@ TALER_EXCHANGE_refund (struct TALER_EXCHANGE_Handle 
*exchange,
                        void *cb_cls);
 
 
-/**
- * Submit a refund request to the exchange and get the exchange's
- * response.  This API is used by a merchant.  Note that
- * while we return the response verbatim to the caller for further
- * processing, we do already verify that the response is well-formed
- * (i.e. that signatures included in the response are all valid).  If
- * the exchange's reply is not well-formed, we return an HTTP status code
- * of zero to @a cb.
- *
- * The @a exchange must be ready to operate (i.e.  have
- * finished processing the /keys reply).  If this check fails, we do
- * NOT initiate the transaction with the exchange and instead return NULL.
- *
- * FIXME: We can probably DEPRECATE this API and only use 
#TALER_EXCHANGE_refund()!
- *
- * @param exchange the exchange handle; the exchange must be ready to operate
- * @param amount the amount to be refunded; must be larger than the refund fee
- *        (as that fee is still being subtracted), and smaller than the amount
- *        (with deposit fee) of the original deposit contribution of this coin
- * @param h_contract_terms hash of the contact of the merchant with the 
customer that is being refunded
- * @param coin_pub coin’s public key of the coin from the original deposit 
operation
- * @param rtransaction_id transaction id for the transaction between merchant 
and customer (of refunding operation);
- *                        this is needed as we may first do a partial refund 
and later a full refund.  If both
- *                        refunds are also over the same amount, we need the 
@a rtransaction_id to make the disjoint
- *                        refund requests different (as requests are 
idempotent and otherwise the 2nd refund might not work).
- * @param merchant_pub public key of the merchant
- * @param merchant_sig signature affirming the refund from the merchant
- * @param cb the callback to call when a reply for this request is available
- * @param cb_cls closure for the above callback
- * @return a handle for this request; NULL if the inputs are invalid (i.e.
- *         signatures fail to verify).  In this case, the callback is not 
called.
- */
-struct TALER_EXCHANGE_RefundHandle *
-TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle *exchange,
-                        const struct TALER_Amount *amount,
-                        const struct GNUNET_HashCode *h_contract_terms,
-                        const struct TALER_CoinSpendPublicKeyP *coin_pub,
-                        uint64_t rtransaction_id,
-                        const struct TALER_MerchantPublicKeyP *merchant_pub,
-                        const struct TALER_MerchantSignatureP *merchant_sig,
-                        TALER_EXCHANGE_RefundCallback cb,
-                        void *cb_cls);
-
-
 /**
  * Cancel a refund permission request.  This function cannot be used
  * on a request handle if a response is already served for it.  If
diff --git a/src/include/taler_testing_lib.h b/src/include/taler_testing_lib.h
index b9a11865..f13823fe 100644
--- a/src/include/taler_testing_lib.h
+++ b/src/include/taler_testing_lib.h
@@ -1126,34 +1126,6 @@ TALER_TESTING_cmd_admin_add_incoming_with_ref (
   const char *ref);
 
 
-/**
- * Create "fakebank transfer" CMD, letting the caller specifying
- * the merchant instance.  This version is useful when a tip
- * reserve should be topped up, in fact the interpreter will need
- * the "tipping instance" in order to get the instance public key
- * and make a wire transfer subject out of it.
- *
- * @param label command label.
- * @param amount amount to transfer.
- * @param payto_debit_account which account sends money.
- * @param auth authentication data
- * @param instance the instance that runs the tipping.  Under this
- *        instance, the configuration file will provide the private
- *        key of the tipping reserve.  This data will then used to
- *        construct the wire transfer subject line.
- * @param config_filename configuration file to use.
- * @return the command.
- */
-struct TALER_TESTING_Command
-TALER_TESTING_cmd_admin_add_incoming_with_instance (
-  const char *label,
-  const char *amount,
-  const struct TALER_BANK_AuthenticationData *auth,
-  const char *payto_debit_account,
-  const char *instance,
-  const char *config_filename);
-
-
 /**
  * Modify a fakebank transfer command to enable retries when the
  * reserve is not yet full or we get other transient errors from
diff --git a/src/lib/exchange_api_refund.c b/src/lib/exchange_api_refund.c
index f675b07a..537be7b8 100644
--- a/src/lib/exchange_api_refund.c
+++ b/src/lib/exchange_api_refund.c
@@ -295,59 +295,7 @@ TALER_EXCHANGE_refund (struct TALER_EXCHANGE_Handle 
*exchange,
   GNUNET_CRYPTO_eddsa_sign (&merchant_priv->eddsa_priv,
                             &rr,
                             &merchant_sig.eddsa_sig);
-  return TALER_EXCHANGE_refund2 (exchange,
-                                 amount,
-                                 h_contract_terms,
-                                 coin_pub,
-                                 rtransaction_id,
-                                 &rr.merchant,
-                                 &merchant_sig,
-                                 cb,
-                                 cb_cls);
-}
-
 
-/**
- * Submit a refund request to the exchange and get the exchange's
- * response.  This API is used by a merchant.  Note that
- * while we return the response verbatim to the caller for further
- * processing, we do already verify that the response is well-formed
- * (i.e. that signatures included in the response are all valid).  If
- * the exchange's reply is not well-formed, we return an HTTP status code
- * of zero to @a cb.
- *
- * The @a exchange must be ready to operate (i.e.  have
- * finished processing the /keys reply).  If this check fails, we do
- * NOT initiate the transaction with the exchange and instead return NULL.
- *
- * @param exchange the exchange handle; the exchange must be ready to operate
- * @param amount the amount to be refunded; must be larger than the refund fee
- *        (as that fee is still being subtracted), and smaller than the amount
- *        (with deposit fee) of the original deposit contribution of this coin
- * @param h_contract_terms hash of the contact of the merchant with the 
customer that is being refunded
- * @param coin_pub coin’s public key of the coin from the original deposit 
operation
- * @param rtransaction_id transaction id for the transaction between merchant 
and customer (of refunding operation);
- *                        this is needed as we may first do a partial refund 
and later a full refund.  If both
- *                        refunds are also over the same amount, we need the 
@a rtransaction_id to make the disjoint
- *                        refund requests different (as requests are 
idempotent and otherwise the 2nd refund might not work).
- * @param merchant_pub public key of the merchant
- * @param merchant_sig signature affirming the refund from the merchant
- * @param cb the callback to call when a reply for this request is available
- * @param cb_cls closure for the above callback
- * @return a handle for this request; NULL if the inputs are invalid (i.e.
- *         signatures fail to verify).  In this case, the callback is not 
called.
- */
-struct TALER_EXCHANGE_RefundHandle *
-TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle *exchange,
-                        const struct TALER_Amount *amount,
-                        const struct GNUNET_HashCode *h_contract_terms,
-                        const struct TALER_CoinSpendPublicKeyP *coin_pub,
-                        uint64_t rtransaction_id,
-                        const struct TALER_MerchantPublicKeyP *merchant_pub,
-                        const struct TALER_MerchantSignatureP *merchant_sig,
-                        TALER_EXCHANGE_RefundCallback cb,
-                        void *cb_cls)
-{
   struct TALER_EXCHANGE_RefundHandle *rh;
   struct GNUNET_CURL_Context *ctx;
   json_t *refund_obj;
@@ -378,9 +326,9 @@ TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle 
*exchange,
                             h_contract_terms),
                           "rtransaction_id", (json_int_t) rtransaction_id,
                           "merchant_pub", GNUNET_JSON_from_data_auto (
-                            merchant_pub),
+                            &rr.merchant),
                           "merchant_sig", GNUNET_JSON_from_data_auto (
-                            merchant_sig)
+                            &merchant_sig)
                           );
   if (NULL == refund_obj)
   {
@@ -398,7 +346,7 @@ TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle 
*exchange,
   rh->depconf.purpose.purpose = htonl 
(TALER_SIGNATURE_EXCHANGE_CONFIRM_REFUND);
   rh->depconf.h_contract_terms = *h_contract_terms;
   rh->depconf.coin_pub = *coin_pub;
-  rh->depconf.merchant = *merchant_pub;
+  rh->depconf.merchant = rr.merchant;
   rh->depconf.rtransaction_id = GNUNET_htonll (rtransaction_id);
   TALER_amount_hton (&rh->depconf.refund_amount,
                      amount);
diff --git a/src/testing/testing_api_cmd_bank_admin_add_incoming.c 
b/src/testing/testing_api_cmd_bank_admin_add_incoming.c
index d8b1d7b0..5df691b3 100644
--- a/src/testing/testing_api_cmd_bank_admin_add_incoming.c
+++ b/src/testing/testing_api_cmd_bank_admin_add_incoming.c
@@ -319,67 +319,10 @@ admin_add_incoming_run (void *cls,
   }
   else
   {
-    if (NULL != fts->instance)
-    {
-      char *section;
-      char *keys;
-      struct GNUNET_CONFIGURATION_Handle *cfg;
-
-      GNUNET_assert (NULL != fts->config_filename);
-      cfg = GNUNET_CONFIGURATION_create ();
-      if (GNUNET_OK !=
-          GNUNET_CONFIGURATION_load (cfg,
-                                     fts->config_filename))
-      {
-        GNUNET_break (0);
-        TALER_TESTING_interpreter_fail (is);
-        return;
-      }
-
-      GNUNET_asprintf (&section,
-                       "instance-%s",
-                       fts->instance);
-      if (GNUNET_OK !=
-          GNUNET_CONFIGURATION_get_value_filename
-            (cfg,
-            section,
-            "TIP_RESERVE_PRIV_FILENAME",
-            &keys))
-      {
-        GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
-                    "Configuration fails to specify reserve"
-                    " private key filename in section %s\n",
-                    section);
-        GNUNET_free (section);
-        TALER_TESTING_interpreter_fail (is);
-        return;
-      }
-      if (GNUNET_OK !=
-          GNUNET_CRYPTO_eddsa_key_from_file (keys,
-                                             GNUNET_NO,
-                                             &fts->reserve_priv.eddsa_priv))
-      {
-        GNUNET_log_config_invalid (GNUNET_ERROR_TYPE_ERROR,
-                                   section,
-                                   "TIP_RESERVE_PRIV_FILENAME",
-                                   "Failed to read private key");
-        GNUNET_free (section);
-        GNUNET_free (keys);
-        TALER_TESTING_interpreter_fail (is);
-        return;
-      }
-      fts->reserve_priv_known = true;
-      GNUNET_free (keys);
-      GNUNET_free (section);
-      GNUNET_CONFIGURATION_destroy (cfg);
-    }
-    else
-    {
-      /* No referenced reserve, no instance to take priv
-       * from, no explicit subject given: create new key! */
-      GNUNET_CRYPTO_eddsa_key_create (&fts->reserve_priv.eddsa_priv);
-      fts->reserve_priv_known = true;
-    }
+    /* No referenced reserve, no instance to take priv
+     * from, no explicit subject given: create new key! */
+    GNUNET_CRYPTO_eddsa_key_create (&fts->reserve_priv.eddsa_priv);
+    fts->reserve_priv_known = true;
   }
   if (! have_public)
     GNUNET_CRYPTO_eddsa_key_get_public (&fts->reserve_priv.eddsa_priv,
@@ -620,47 +563,6 @@ TALER_TESTING_cmd_admin_add_incoming_with_ref
 }
 
 
-/**
- * Create "/admin/add-incoming" CMD, letting the caller specifying
- * the merchant instance.  This version is useful when a tip
- * reserve should be topped up, in fact the interpreter will need
- * the "tipping instance" in order to get the instance public key
- * and make a wire transfer subject out of it.
- *
- * @param label command label.
- * @param amount amount to transfer.
- * @param payto_debit_account which account (expressed as a number)
- *        gives money
- * @param auth authentication data
- * @param instance the instance that runs the tipping.  Under this
- *        instance, the configuration file will provide the private
- *        key of the tipping reserve.  This data will then used to
- *        construct the wire transfer subject line.
- * @param config_filename configuration file to use.
- * @return the command.
- */
-struct TALER_TESTING_Command
-TALER_TESTING_cmd_admin_add_incoming_with_instance
-  (const char *label,
-  const char *amount,
-  const struct TALER_BANK_AuthenticationData *auth,
-  const char *payto_debit_account,
-  const char *instance,
-  const char *config_filename)
-{
-  struct AdminAddIncomingState *fts;
-
-  fts = make_fts (amount,
-                  auth,
-                  payto_debit_account);
-  fts->instance = instance;
-  fts->config_filename = config_filename;
-
-  return make_command (label,
-                       fts);
-}
-
-
 /**
  * Modify a fakebank transfer command to enable retries when the
  * reserve is not yet full or we get other transient errors from the

-- 
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.