[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[taler-exchange] branch master updated: debian: new config file structur
|
From: |
gnunet |
|
Subject: |
[taler-exchange] branch master updated: debian: new config file structure |
|
Date: |
Fri, 16 Jul 2021 17:16:45 +0200 |
This is an automated email from the git hooks/post-receive script.
dold pushed a commit to branch master
in repository exchange.
The following commit(s) were added to refs/heads/master by this push:
new 5597dc6f debian: new config file structure
5597dc6f is described below
commit 5597dc6f1e8d8b73f906365618ba3922f9dd7660
Author: Florian Dold <florian@dold.me>
AuthorDate: Fri Jul 16 17:16:38 2021 +0200
debian: new config file structure
---
debian/etc/taler-exchange.conf | 38 ---
debian/etc/taler/auditor-service-default.conf | 1 +
.../auditor-system.conf} | 0
.../exchange-business.conf} | 18 +-
.../exchange-db.conf} | 3 +-
debian/etc/taler/exchange-service-default.conf | 3 +
debian/etc/taler/exchange-service-wire.conf | 4 +
debian/etc/taler/exchange-system.conf | 21 ++
.../exchange-wire-gateway.conf} | 6 -
debian/taler-auditor.install | 2 +-
debian/taler-exchange.install | 4 +-
debian/taler-exchange.postinst | 255 +++++++++++----------
12 files changed, 177 insertions(+), 178 deletions(-)
diff --git a/debian/etc/taler-exchange.conf b/debian/etc/taler-exchange.conf
deleted file mode 100644
index 34af223d..00000000
--- a/debian/etc/taler-exchange.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-# First line should be: "INLINE@ taler-exchange-db.conf"
-# 2nd line should be: "INLINE@ taler-secmod.conf"
-@INLINE@ taler-exchange-db.conf
-@INLINE@ taler-secmod.conf
-# Do not edit this file using 'taler-config', otherwise the line
-# above will be lost!
-#
-# Please read the taler-exchange.README.Debian for how to configure a Taler
exchange.
-#
-
-[PATHS]
-
-# Move runtime data "tmp" directory to /var/lib/taler-exchange/
-# to possibly provide additional protection from unwarranted access.
-TALER_RUNTIME_DIR = /var/lib/taler-exchange/tmp/
-
-[exchange]
-# Debian package is configured to use a reverse proxy with a UNIX
-# domain socket. See nginx/apache configuration files.
-SERVE = UNIX
-UNIXPATH = /var/lib/taler-exchange/exchange.sock
-
-# Only supported database is Postgres right now.
-DATABASE = postgres
-
-# Here you MUST add the master public key of the offline system
-# which you can get using `taler-exchange-offline setup`.
-# This is just an example, your key will be different!
-# MASTER_PUBLIC_KEY = YE6Q6TR1EDB7FD0S68TGDZGF1P0GHJD2S0XVV8R2S62MYJ6HJ4ZG
-MASTER_PUBLIC_KEY =
-
-# For your terms of service and privacy policy, you should specify
-# an Etag that must be updated whenever there are significant
-# changes to either document. The format is up to you, what matters
-# is that the value is updated and never re-used. See the HTTP
-# specification on Etags.
-# TERMS_ETAG =
-# PRIVACY_ETAG =
diff --git a/debian/etc/taler/auditor-service-default.conf
b/debian/etc/taler/auditor-service-default.conf
new file mode 100644
index 00000000..d57283ea
--- /dev/null
+++ b/debian/etc/taler/auditor-service-default.conf
@@ -0,0 +1 @@
+@INCLUDE@ /etc/taler/auditor-system.conf
diff --git a/debian/etc/taler-auditor.conf
b/debian/etc/taler/auditor-system.conf
similarity index 100%
rename from debian/etc/taler-auditor.conf
rename to debian/etc/taler/auditor-system.conf
diff --git a/debian/etc/taler-secmod.conf
b/debian/etc/taler/exchange-business.conf
similarity index 61%
rename from debian/etc/taler-secmod.conf
rename to debian/etc/taler/exchange-business.conf
index 8b3bb34d..8b97c608 100644
--- a/debian/etc/taler-secmod.conf
+++ b/debian/etc/taler/exchange-business.conf
@@ -1,13 +1,23 @@
-[PATHS]
-
-# Move runtime data "tmp" directory to /var/lib/taler-exchange/
-# to possibly provide additional protection from unwarranted access.
TALER_RUNTIME_DIR = /var/lib/taler-exchange/tmp/
[taler]
# Here you need to set the currency of your exchange:
# CURRENCY = KUDOS
+# Here you MUST add the master public key of the offline system
+# which you can get using `taler-exchange-offline setup`.
+# This is just an example, your key will be different!
+# MASTER_PUBLIC_KEY = YE6Q6TR1EDB7FD0S68TGDZGF1P0GHJD2S0XVV8R2S62MYJ6HJ4ZG
+MASTER_PUBLIC_KEY =
+
+# For your terms of service and privacy policy, you should specify
+# an Etag that must be updated whenever there are significant
+# changes to either document. The format is up to you, what matters
+# is that the value is updated and never re-used. See the HTTP
+# specification on Etags.
+# TERMS_ETAG =
+# PRIVACY_ETAG =
+
# You must specify the various denominations to be offered by your exchange
# in sections called "coin_".
diff --git a/debian/etc/taler-exchange-db.conf
b/debian/etc/taler/exchange-db.conf
similarity index 70%
rename from debian/etc/taler-exchange-db.conf
rename to debian/etc/taler/exchange-db.conf
index a6217f48..a7a727b6 100644
--- a/debian/etc/taler-exchange-db.conf
+++ b/debian/etc/taler/exchange-db.conf
@@ -1,5 +1,4 @@
-# This file should contain the access control information to talk to
-# the exchange database.
+# Database configuration for the Taler exchange.
[exchangedb-postgres]
diff --git a/debian/etc/taler/exchange-service-default.conf
b/debian/etc/taler/exchange-service-default.conf
new file mode 100644
index 00000000..0fa198f8
--- /dev/null
+++ b/debian/etc/taler/exchange-service-default.conf
@@ -0,0 +1,3 @@
+@INCLUDE@ /etc/taler/exchange-system.conf
+@INCLUDE@ /etc/taler/exchange-db.conf
+@INCLUDE@ /etc/taler/exchange-business.conf
diff --git a/debian/etc/taler/exchange-service-wire.conf
b/debian/etc/taler/exchange-service-wire.conf
new file mode 100644
index 00000000..d6dc0253
--- /dev/null
+++ b/debian/etc/taler/exchange-service-wire.conf
@@ -0,0 +1,4 @@
+@INCLUDE@ /etc/taler/exchange-system.conf
+@INCLUDE@ /etc/taler/exchange-db.conf
+@INCLUDE@ /etc/taler/exchange-business.conf
+@INCLUDE@ /etc/taler/exchange-wire-gateway.conf
diff --git a/debian/etc/taler/exchange-system.conf
b/debian/etc/taler/exchange-system.conf
new file mode 100644
index 00000000..bdf53fce
--- /dev/null
+++ b/debian/etc/taler/exchange-system.conf
@@ -0,0 +1,21 @@
+# Configuration settings for system parameters of
+# the exchange. Should be included in all service-specific
+# configuration files for the exchange.
+#
+# Please read the taler-exchange.README.Debian for how to configure a Taler
exchange.
+
+[PATHS]
+
+# Move runtime data "tmp" directory to /var/lib/taler-exchange/
+# to possibly provide additional protection from unwarranted access.
+TALER_RUNTIME_DIR = /var/lib/taler-exchange/tmp/
+
+
+[exchange]
+# Debian package is configured to use a reverse proxy with a UNIX
+# domain socket. See nginx/apache configuration files.
+SERVE = UNIX
+UNIXPATH = /var/lib/taler-exchange/exchange.sock
+
+# Only supported database is Postgres right now.
+DATABASE = postgres
diff --git a/debian/etc/taler-wire.conf
b/debian/etc/taler/exchange-wire-gateway.conf
similarity index 61%
rename from debian/etc/taler-wire.conf
rename to debian/etc/taler/exchange-wire-gateway.conf
index d0484381..e5c749c8 100644
--- a/debian/etc/taler-wire.conf
+++ b/debian/etc/taler/exchange-wire-gateway.conf
@@ -1,9 +1,3 @@
-# First line should be: "INLINE@ taler-exchange-db.conf"
-@INLINE@ taler-exchange-db.conf
-# Do not edit this file using 'taler-config', otherwise the line
-# above will be lost!
-
-
# This file should contain the wire account access information which is needed
# by the Taler exchange to talk to LibEuFin to interact with the bank.
# The file SHOULD only be readable for the "taler-exchange-wire" user,
diff --git a/debian/taler-auditor.install b/debian/taler-auditor.install
index b2528c8a..1f32e5bb 100644
--- a/debian/taler-auditor.install
+++ b/debian/taler-auditor.install
@@ -13,6 +13,6 @@ usr/share/man/man1/taler-helper-auditor*
usr/share/info/taler-auditor*
usr/share/taler/config.d/auditor*
usr/share/taler/sql/auditor/*
-debian/etc/taler-auditor.conf etc/
+debian/etc/taler/auditor* etc/
debian/auditor-conf/* etc/taler-auditor/
usr/share/taler-exchange/auditor-report.tex.j2
diff --git a/debian/taler-exchange.install b/debian/taler-exchange.install
index 7d484cbf..82a39d46 100644
--- a/debian/taler-exchange.install
+++ b/debian/taler-exchange.install
@@ -6,7 +6,7 @@ usr/share/man/man1/taler-wire*
usr/share/info/taler-bank*
usr/share/info/taler-exchange*
usr/share/taler/config.d/*
-debian/etc/* etc/
-debian/exchange-conf/* etc/taler-exchange/
+debian/etc/exchange* etc/
+debian/exchange-conf/* usr/share/taler/sample-configs/
usr/share/taler-exchange/pp/*/*
usr/share/taler-exchange/tos/*/*
diff --git a/debian/taler-exchange.postinst b/debian/taler-exchange.postinst
index 72f8f6c5..e8ef11d6 100644
--- a/debian/taler-exchange.postinst
+++ b/debian/taler-exchange.postinst
@@ -2,106 +2,111 @@
set -e
-
. /usr/share/debconf/confmodule
+# usage: fixperm user:group perms file
+function fixperm() {
+ chown "$1" "$3"
+ chmod "$2" "$3"
+}
+
+# usage: lncfg user target
+function lncfg() {
+ mkdir ~$1/.config
+ chown $1:$1 ~$1/.config
+ ln -sf $1/.config/taler.conf $2
+}
+
case "${1}" in
- configure)
- db_version 2.0
-
- db_get taler-exchange/eusername
- _EUSERNAME="${RET:-taler-exchange-httpd}"
-
- db_get taler-exchange/rsecusername
- _RSECUSERNAME="${RET:-taler-exchange-secmod-rsa}"
-
- db_get taler-exchange/esecusername
- _ESECUSERNAME="${RET:-taler-exchange-secmod-eddsa}"
-
- db_get taler-exchange/wireusername
- _WIREUSERNAME="${RET:-taler-exchange-wire}"
-
- db_get taler-exchange/aggrusername
- _AGGRUSERNAME="${RET:-taler-exchange-aggregator}"
-
- db_get taler-exchange/groupname
- _GROUPNAME="${RET:-taler-private}"
-
- db_get taler-exchange/dbgroupname
- _DBGROUPNAME="${RET:-taler-exchange-db}"
-
- db_stop
-
- CONFIG_FILE="/etc/default/taler-exchange"
- TALER_HOME="/var/lib/taler-exchange"
-
- # Creating taler groups as needed
- if ! getent group ${_GROUPNAME} > /dev/null
- then
- echo -n "Creating new Taler group ${_GROUPNAME}:"
- addgroup --quiet --system ${_GROUPNAME}
- echo " done."
- fi
- if ! getent group ${_DBGROUPNAME} > /dev/null
- then
- echo -n "Creating new Taler group ${_DBGROUPNAME}:"
- addgroup --quiet --system ${_DBGROUPNAME}
- echo " done."
- fi
-
- # Creating taler users if needed
- if ! getent passwd ${_EUSERNAME} > /dev/null
- then
- echo -n "Creating new Taler user ${_EUSERNAME}:"
- adduser --quiet --system --ingroup ${_GROUPNAME} --home
${TALER_HOME}/httpd ${_EUSERNAME}
- adduser ${_EUSERNAME} ${_DBGROUPNAME}
- echo " done."
- fi
- if ! getent passwd ${_RSECUSERNAME} > /dev/null
- then
- echo -n "Creating new Taler user ${_RSECUSERNAME}:"
- adduser --quiet --system --ingroup ${_GROUPNAME} --home
${TALER_HOME}/secmod-rsa ${_RSECUSERNAME}
- echo " done."
- fi
- if ! getent passwd ${_ESECUSERNAME} > /dev/null
- then
- echo -n "Creating new Taler user ${_ESECUSERNAME}:"
- adduser --quiet --system --ingroup ${_GROUPNAME} --home
${TALER_HOME}/secmod-eddsa ${_ESECUSERNAME}
- echo " done."
- fi
- if ! getent passwd ${_WIREUSERNAME} > /dev/null
- then
- echo -n "Creating new Taler user ${_WIREUSERNAME}:"
- adduser --quiet --system --home ${TALER_HOME}/wire
${_WIREUSERNAME}
- adduser --quiet ${_WIREUSERNAME} ${_DBGROUPNAME}
- echo " done."
- fi
- if ! getent passwd ${_AGGRUSERNAME} > /dev/null
- then
- echo -n "Creating new Taler user ${_AGGRUSERNAME}:"
- adduser --quiet --system --home
${TALER_HOME}/aggregator ${_AGGRUSERNAME}
- adduser --quiet ${_AGGRUSERNAME} ${_DBGROUPNAME}
- echo " done."
- fi
-
- # Writing new values to configuration file
- echo -n "Writing new configuration file:"
- CONFIG_NEW=$(tempfile)
-
-cat > "${CONFIG_NEW}" <<EOF
+configure)
+ db_version 2.0
+
+ db_get taler-exchange/eusername
+ _EUSERNAME="${RET:-taler-exchange-httpd}"
+
+ db_get taler-exchange/rsecusername
+ _RSECUSERNAME="${RET:-taler-exchange-secmod-rsa}"
+
+ db_get taler-exchange/esecusername
+ _ESECUSERNAME="${RET:-taler-exchange-secmod-eddsa}"
+
+ db_get taler-exchange/wireusername
+ _WIREUSERNAME="${RET:-taler-exchange-wire}"
+
+ db_get taler-exchange/aggrusername
+ _AGGRUSERNAME="${RET:-taler-exchange-aggregator}"
+
+ db_get taler-exchange/groupname
+ _GROUPNAME="${RET:-taler-private}"
+
+ db_get taler-exchange/dbgroupname
+ _DBGROUPNAME="${RET:-taler-exchange-db}"
+
+ db_stop
+
+ CONFIG_FILE="/etc/default/taler-exchange"
+ TALER_HOME="/var/lib/taler-exchange"
+
+ # Creating taler groups as needed
+ if ! getent group ${_GROUPNAME} >/dev/null; then
+ echo -n "Creating new Taler group ${_GROUPNAME}:"
+ addgroup --quiet --system ${_GROUPNAME}
+ echo " done."
+ fi
+ if ! getent group ${_DBGROUPNAME} >/dev/null; then
+ echo -n "Creating new Taler group ${_DBGROUPNAME}:"
+ addgroup --quiet --system ${_DBGROUPNAME}
+ echo " done."
+ fi
+
+ # Creating taler users if needed
+ if ! getent passwd ${_EUSERNAME} >/dev/null; then
+ echo -n "Creating new Taler user ${_EUSERNAME}:"
+ adduser --quiet --system --ingroup ${_GROUPNAME} --home
${TALER_HOME}/httpd ${_EUSERNAME}
+ adduser ${_EUSERNAME} ${_DBGROUPNAME}
+ echo " done."
+ fi
+ if ! getent passwd ${_RSECUSERNAME} >/dev/null; then
+ echo -n "Creating new Taler user ${_RSECUSERNAME}:"
+ adduser --quiet --system --ingroup ${_GROUPNAME} --home
${TALER_HOME}/secmod-rsa ${_RSECUSERNAME}
+ echo " done."
+ fi
+ if ! getent passwd ${_ESECUSERNAME} >/dev/null; then
+ echo -n "Creating new Taler user ${_ESECUSERNAME}:"
+ adduser --quiet --system --ingroup ${_GROUPNAME} --home
${TALER_HOME}/secmod-eddsa ${_ESECUSERNAME}
+ echo " done."
+ fi
+ if ! getent passwd ${_WIREUSERNAME} >/dev/null; then
+ echo -n "Creating new Taler user ${_WIREUSERNAME}:"
+ adduser --quiet --system --home ${TALER_HOME}/wire ${_WIREUSERNAME}
+ adduser --quiet ${_WIREUSERNAME} ${_DBGROUPNAME}
+ echo " done."
+ fi
+ if ! getent passwd ${_AGGRUSERNAME} >/dev/null; then
+ echo -n "Creating new Taler user ${_AGGRUSERNAME}:"
+ adduser --quiet --system --home ${TALER_HOME}/aggregator ${_AGGRUSERNAME}
+ adduser --quiet ${_AGGRUSERNAME} ${_DBGROUPNAME}
+ echo " done."
+ fi
+
+ # Writing new values to configuration file
+ echo -n "Writing new configuration file:"
+ CONFIG_NEW=$(tempfile)
+
+ cat >"${CONFIG_NEW}" <<EOF
# This file controls the behaviour of the Taler init script.
# It will be parsed as a shell script.
# please do not edit by hand, use 'dpkg-reconfigure taler-exchange'.
TALER_EUSER=${_EUSERNAME}
-TALER_RSECUSER=${_RESCUSERNAME}
+TALER_RSECUSER=${_RSECUSERNAME}
TALER_ESECUSER=${_ESECUSERNAME}
TALER_WIREUSER=${_WIREUSERNAME}
TALER_AGGRUSER=${_AGGRUSERNAME}
TALER_GROUP=${_GROUPNAME}
EOF
-cat > "/etc/systemd/system/taler-exchange-httpd.socket" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-httpd.socket" <<EOF
[Unit]
Description=Taler Exchange Socket
PartOf=taler-exchange-httpd.service
@@ -118,7 +123,7 @@ SocketMode=0660
WantedBy=sockets.target
EOF
-cat > "/etc/systemd/system/taler-exchange-httpd.service" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-httpd.service" <<EOF
[Unit]
Description=GNU Taler payment system exchange REST API
AssertPathExists=/var/lib/taler-exchange/
@@ -131,7 +136,7 @@ EnvironmentFile=/etc/default/taler-exchange
User=${_EUSERNAME}
Type=simple
Restart=on-failure
-ExecStart=/usr/bin/taler-exchange-httpd -c /etc/taler-exchange.conf
+ExecStart=/usr/bin/taler-exchange-httpd -c
/etc/taler/exchange-service-default.conf
PrivateTmp=no
PrivateDevices=yes
ProtectSystem=full
@@ -140,7 +145,7 @@ ProtectSystem=full
WantedBy=multi-user.target
EOF
-cat > "/etc/systemd/system/taler-exchange-secmod-rsa.service" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-secmod-rsa.service" <<EOF
[Unit]
Description=GNU Taler payment system exchange RSA security module
@@ -149,13 +154,13 @@ EnvironmentFile=/etc/default/taler-exchange
User=${_RSECUSERNAME}
Type=simple
Restart=on-failure
-ExecStart=/usr/bin/taler-exchange-secmod-rsa -c /etc/taler-secmod.conf
+ExecStart=/usr/bin/taler-exchange-secmod-rsa -c
/etc/taler/exchange-service-default.conf
PrivateTmp=no
PrivateDevices=yes
ProtectSystem=full
EOF
-cat > "/etc/systemd/system/taler-exchange-secmod-eddsa.service" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-secmod-eddsa.service" <<EOF
[Unit]
Description=GNU Taler payment system exchange EdDSA security module
@@ -164,13 +169,13 @@ EnvironmentFile=/etc/default/taler-exchange
User=${_ESECUSERNAME}
Type=simple
Restart=on-failure
-ExecStart=/usr/bin/taler-exchange-secmod-eddsa -c /etc/taler-secmod.conf
+ExecStart=/usr/bin/taler-exchange-secmod-eddsa -c
/etc/taler/exchange-service-default.conf
PrivateTmp=no
PrivateDevices=yes
ProtectSystem=full
EOF
-cat > "/etc/systemd/system/taler-exchange-wirewatch.service" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-wirewatch.service" <<EOF
[Unit]
Description=GNU Taler payment system exchange wirewatch service
After=network.target
@@ -180,14 +185,14 @@ EnvironmentFile=/etc/default/taler-exchange
User=${_WIREUSERNAME}
Type=simple
Restart=on-failure
-ExecStart=/usr/bin/taler-exchange-wirewatch -c /etc/taler-wire.conf
+ExecStart=/usr/bin/taler-exchange-wirewatch -c
/etc/taler/exchange-service-wire.conf
PrivateTmp=yes
PrivateDevices=yes
ProtectSystem=full
EOF
-cat > "/etc/systemd/system/taler-exchange-transfer.service" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-transfer.service" <<EOF
[Unit]
Description=GNU Taler payment system exchange transfer service
After=network.target
@@ -197,13 +202,13 @@ EnvironmentFile=/etc/default/taler-exchange
User=${_WIREUSERNAME}
Type=simple
Restart=on-failure
-ExecStart=/usr/bin/taler-exchange-wirewatch -c /etc/taler-wire.conf
+ExecStart=/usr/bin/taler-exchange-wirewatch -c
/etc/taler/exchange-service-wire.conf
PrivateTmp=yes
PrivateDevices=yes
ProtectSystem=full
EOF
-cat > "/etc/systemd/system/taler-exchange-aggregator.service" <<EOF
+ cat >"/etc/systemd/system/taler-exchange-aggregator.service" <<EOF
[Unit]
Description=GNU Taler payment system exchange aggregator service
@@ -212,7 +217,7 @@ EnvironmentFile=/etc/default/taler-exchange
User=${_AGGRUSERNAME}
Type=simple
Restart=on-failure
-ExecStart=/usr/bin/taler-exchange-aggregator -c /etc/taler.conf
+ExecStart=/usr/bin/taler-exchange-aggregator -c
/etc/taler/exchange-service-default.conf
PrivateTmp=yes
PrivateDevices=yes
ProtectSystem=full
@@ -220,42 +225,42 @@ ProtectSystem=full
EOF
- cp -f "${CONFIG_NEW}" "${CONFIG_FILE}"
- rm -f "${CONFIG_NEW}"
- echo " done."
+ cp -f "${CONFIG_NEW}" "${CONFIG_FILE}"
+ rm -f "${CONFIG_NEW}"
+ echo " done."
- echo -n "Setting up system services "
+ echo -n "Setting up system services "
- mkdir -p /var/lib/taler-exchange/tmp
- chown root:${_GROUPNAME} /var/lib/taler-exchange/tmp
- chmod 770 /var/lib/taler-exchange/tmp
- chmod +s /var/lib/taler-exchange/tmp
+ mkdir -p /var/lib/taler-exchange/tmp
+ chown root:${_GROUPNAME} /var/lib/taler-exchange/tmp
+ chmod 770 /var/lib/taler-exchange/tmp
+ chmod +s /var/lib/taler-exchange/tmp
- chown root:${_GROUPNAME} /etc/taler-secmod.conf
- chmod 640 /etc/taler-secmod.conf
- chown ${_WIREUSERNAME}:root /etc/taler-wire.conf
- chmod 460 /etc/taler-wire.conf
- chown root:${_DBGROUPNAME} /etc/taler-exchange-db.conf
- chmod 640 /etc/taler-exchange-db.conf
- chown ${_EUSERNAME}:${_GROUPNAME} /etc/taler-exchange.conf
- chmod 460 /etc/taler-wire.conf
+ fixperm ${_WIREUSERNAME}:root 460 /etc/taler/exchange-wire-gateway.conf
+ fixperm root:${_DBGROUPNAME} 640 /etc/taler/exchange-db.conf
- systemctl daemon-reload >/dev/null 2>&1 || true
+ systemctl daemon-reload >/dev/null 2>&1 || true
+ echo "done."
- echo "done."
+ echo -n "Linking config files"
+ lncfg ${_EUSERNAME} /etc/taler/exchange-service-default.conf
+ lncfg ${_RSECUSERNAME} /etc/taler/exchange-service-default.conf
+ lncfg ${_ESECUSERNAME} /etc/taler/exchange-service-default.conf
+ lncfg ${_AGGRUSERNAME} /etc/taler/exchange-service-default.conf
+ lncfg ${_WIREUSERNAME} /etc/taler/exchange-service-wire.conf
+ echo " done"
- # Cleaning
- echo "All done."
- ;;
+ # Cleaning
+ echo "All done."
+ ;;
- abort-upgrade|abort-remove|abort-deconfigure)
- ;;
+abort-upgrade | abort-remove | abort-deconfigure) ;;
- *)
- echo "postinst called with unknown argument \`${1}'" >&2
- exit 1
- ;;
+*)
+ echo "postinst called with unknown argument \`${1}'" >&2
+ exit 1
+ ;;
esac
#DEBHELPER#
--
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [taler-exchange] branch master updated: debian: new config file structure,
gnunet <=