gpsd-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-dev] gpsprof giving some errors


From: Sanjeev Gupta
Subject: Re: [gpsd-dev] gpsprof giving some errors
Date: Mon, 24 Aug 2015 01:59:44 +0800


On Sun, Aug 23, 2015 at 6:24 PM, Nuno Gonçalves <address@hidden> wrote:
It seems there are some issues with the DEVICE object specification:

Consider this message produced by GPSD latest revision:

{"class":"DEVICE","path":"tcp://localhost:8932","driver":"NMEA0183","activated":"2015-08-22T22:02:47.576Z","flags":1}


But at http://www.catb.org/gpsd/gpsd_json.html, we see that the DEVICE
object MUST always contain a "parity" and "stopbit" elements. Since
they wouldn't make sense this case should be a documentation error.

Just below the DEVICE spec table, is the line:

"The serial parameters will be omitted in a response describing a TCP/IP source such as an Ntrip, DGPSIP, or AIS feed."


--
Sanjeev Gupta
+65 98551208     http://www.linkedin.com/in/ghane

reply via email to

[Prev in Thread] Current Thread [Next in Thread]