[Groff-commit] groff ChangeLog man/groff.man man/groff_char.ma...

[Werner LEMBERG]

CVSROOT:        /cvsroot/groff
Module name:    groff
Changes by:     Werner LEMBERG <wl>     07/09/23 07:38:54

Modified files:
        .              : ChangeLog 
        man            : groff.man groff_char.man 
        src/preproc/refer: label.y 

Log message:
        * man/groff.man: Fix URL of CSTR 54.
        
        * man/groff_char.man: Normalize character set names as defined
        by IANA.  Based on a patch from Axel Kielhorn.
        
        * src/preproc/refer/label.y: Undo change from 2007-09-19.

CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/groff/ChangeLog?cvsroot=groff&r1=1.1102&r2=1.1103
http://cvs.savannah.gnu.org/viewcvs/groff/man/groff.man?cvsroot=groff&r1=1.96&r2=1.97
http://cvs.savannah.gnu.org/viewcvs/groff/man/groff_char.man?cvsroot=groff&r1=1.26&r2=1.27
http://cvs.savannah.gnu.org/viewcvs/groff/src/preproc/refer/label.y?cvsroot=groff&r1=1.8&r2=1.9

Patches:
Index: ChangeLog
===================================================================
RCS file: /cvsroot/groff/groff/ChangeLog,v
retrieving revision 1.1102
retrieving revision 1.1103
diff -u -b -r1.1102 -r1.1103
--- ChangeLog   20 Sep 2007 07:39:30 -0000      1.1102
+++ ChangeLog   23 Sep 2007 07:38:53 -0000      1.1103
@@ -1,3 +1,14 @@
+2007-09-23  Axel Kielhorn  <address@hidden>
+
+       * man/groff.man: Fix URL of CSTR 54.
+
+2007-09-23  Werner LEMBERG  <address@hidden>
+
+       * man/groff_char.man: Normalize character set names as defined
+       by IANA.  Based on a patch from Axel Kielhorn.
+
+       * src/preproc/refer/label.y: Undo change from 2007-09-19.
+
 2007-09-19  Werner LEMBERG  <address@hidden>
 
        * src/roff/troff/input.cpp (interpolate_arg): Remove compiler

Index: man/groff.man
===================================================================
RCS file: /cvsroot/groff/groff/man/groff.man,v
retrieving revision 1.96
retrieving revision 1.97
diff -u -b -r1.96 -r1.97
--- man/groff.man       15 Sep 2007 08:10:46 -0000      1.96
+++ man/groff.man       23 Sep 2007 07:38:54 -0000      1.97
@@ -2,7 +2,7 @@
 .ig
 groff.man
 
-Last update: 15 Sep 2007
+Last update: 23 Sep 2007
 
 This file is part of groff, the GNU roff type-setting system.
 
@@ -3958,7 +3958,7 @@
 .
 .TP
 .I [CSTR\~#54]
-.UR http://\:cm.bell-labs.com/\:cm/\:cs/\:54.ps
+.UR http://\:cm.bell-labs.com/\:cm/\:cs/\:cstr/\:54.ps.gz
 Nroff/\:Troff User's Manual by Osanna & Kernighan
 .UE
 \[em] the bible for classical troff.

Index: man/groff_char.man
===================================================================
RCS file: /cvsroot/groff/groff/man/groff_char.man,v
retrieving revision 1.26
retrieving revision 1.27
diff -u -b -r1.26 -r1.27
--- man/groff_char.man  22 Feb 2006 09:01:37 -0000      1.26
+++ man/groff_char.man  23 Sep 2007 07:38:54 -0000      1.27
@@ -17,9 +17,9 @@
 This file is part of groff (GNU roff).
 
 File position: <groff_src_top>/man/groff_char.man
-Last update: 21 Feb 2006
+Last update: 23 Sep 2006
 
-Copyright (C) 1989-2000, 2001, 2002, 2003, 2004, 2006
+Copyright (C) 1989-2000, 2001, 2002, 2003, 2004, 2006, 2007
   Free Software Foundation, Inc.
 written by Werner Lemberg <address@hidden>
 with additions by Bernd Warken <address@hidden>
@@ -358,7 +358,7 @@
 .
 This manual page lists the standard
 .B groff
-glyph names and the default input mapping, \%latin-1.
+glyph names and the default input mapping, \%latin1.
 .
 The glyphs in this document look different depending
 on which output device was chosen (with option
@@ -382,7 +382,7 @@
 On ASCII platforms, input character codes in the range 0 to 127 (decimal)
 represent the usual \%7-bit ASCII characters, while codes between 127
 and 255 are interpreted as the corresponding characters in the
-.I \%Latin-1
+.I \%latin1
 .RI ( \%ISO-8859-1 )
 code set by default.
 .
@@ -395,14 +395,14 @@
 .
 On EBCDIC platforms, only code page
 .B cp1047
-is supported (which contains the same characters as \%Latin-1; the
+is supported (which contains the same characters as \%latin1; the
 input encoding file is called \f(CWcp1047.tmac\fP).
 .
 Again, some input characters are reserved for internal and special purposes.
 .
 It is rather straightforward (for the experienced user) to set up other
 \%8-bit encodings like
-.IR \%Latin-2 ;
+.IR \%latin2 ;
 since
 .B groff
 uses Unicode in the next major version, no additional encodings
@@ -460,7 +460,7 @@
 .TP
 .I "Input code"
 applies to glyphs which can be input with a single character, and
-gives the ISO \%Latin-1 decimal code of that input character.
+gives the ISO \%latin1 decimal code of that input character.
 .
 Note that this code is equivalent to the lowest 256 Unicode characters,
 including \%7-bit ASCII in the range 0 to\ 127.
@@ -484,7 +484,7 @@
 These are the basic glyphs having 7-bit ASCII code values assigned.
 .
 They are identical to the printable characters of the
-character standards \%ISO-8859-1 (\%Latin-1) and Unicode (range
+character standards \%ISO-8859-1 (\%latin1) and Unicode (range
 .IR "C0 Controls and Basic Latin" ).
 .
 The glyph names used in composite glyph names are `u0020' up to `u007E'.
@@ -524,31 +524,31 @@
 .
 .TP
 .B \`
-the ISO \%Latin-1 `Grave Accent' (code\ 96) prints as `, a left single
+the ISO \%latin1 `Grave Accent' (code\ 96) prints as `, a left single
 quotation mark; the original character can be obtained with `\f(CW\e`\fP'.
 .
 .
 .TP
 .B \*(aq
-the ISO \%Latin-1 `Apostrophe' (code\ 39) prints as ', a right single
+the ISO \%latin1 `Apostrophe' (code\ 39) prints as ', a right single
 quotation mark; the original character can be obtained with `\f(CW\e(aq\fP'.
 .
 .
 .TP
 .B -
-the ISO \%Latin-1 `Hyphen, Minus Sign' (code\ 45) prints as a hyphen; a
+the ISO \%latin1 `Hyphen, Minus Sign' (code\ 45) prints as a hyphen; a
 minus sign can be obtained with `\f(CW\e-\fP'.
 .
 .
 .TP
 .B ~
-the ISO \%Latin-1 `Tilde' (code\ 126) is reduced in size to be usable as
+the ISO \%latin1 `Tilde' (code\ 126) is reduced in size to be usable as
 a diacritic; a larger glyph can be obtained with `\f(CW\e(ti\fP'.
 .
 .
 .TP
 .B ^
-the ISO \%Latin-1 `Circumflex Accent' (code\ 94) is reduced in size to be
+the ISO \%latin1 `Circumflex Accent' (code\ 94) is reduced in size to be
 usable as a diacritic; a larger glyph can be obtained with `\f(CW\e(ha\fP'.
 .
 .
@@ -603,10 +603,10 @@
 .\" --------------------------------------------------------------------
 .
 They are interpreted as printable characters according to the
-.I Latin-1
-.RI ( iso-8859-1 )
+.I latin1
+.RI ( ISO-8859-1 )
 code set, being identical to the Unicode range
-.IR "C1 Controls and Latin-1 Supplement" .
+.IR "C1 Controls and Latin1 Supplement" .
 .
 .
 .P
@@ -617,7 +617,7 @@
 .TP
 160
 .
-the ISO \%Latin-1
+the ISO \%latin1
 .I no-break space
 is mapped to `\f(CW\e~\fP', the stretchable space character.
 .
@@ -637,7 +637,7 @@
 are printable characters that print as themselves.
 .
 Although they can be specified directly with the keyboard on systems
-with a \%Latin-1 code page, it is better to use their glyph names;
+with a \%latin1 code page, it is better to use their glyph names;
 see next section.
 .
 .P
@@ -750,7 +750,7 @@
 describes how these escape sequences look.
 .
 Glyph names can consist of quite arbitrary characters from the
-ASCII or \%Latin-1 code set, not only alphanumeric characters.
+ASCII or \%latin1 code set, not only alphanumeric characters.
 .
 Here some examples:
 .

Index: src/preproc/refer/label.y
===================================================================
RCS file: /cvsroot/groff/groff/src/preproc/refer/label.y,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -b -r1.8 -r1.9
--- src/preproc/refer/label.y   20 Sep 2007 07:39:30 -0000      1.8
+++ src/preproc/refer/label.y   23 Sep 2007 07:38:54 -0000      1.9
@@ -28,6 +28,7 @@
 
 int yylex();
 void yyerror(const char *);
+int yyparse();
 
 static const char *format_serial(char c, int n);