[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[groff] 35/35: [man pages]: Fix markup nit.
|
From: |
G. Branden Robinson |
|
Subject: |
[groff] 35/35: [man pages]: Fix markup nit. |
|
Date: |
Mon, 21 Feb 2022 06:16:00 -0500 (EST) |
gbranden pushed a commit to branch master
in repository groff.
commit 2290508cdef28eae78777a59bb6c1ba173e74f4a
Author: G. Branden Robinson <g.branden.robinson@gmail.com>
AuthorDate: Mon Feb 21 21:21:28 2022 +1100
[man pages]: Fix markup nit.
Drop leading hyphenation control escape sequence prefixed to
interpolations of patterns replaced by sed(1) during man page source
generation; the replacements already begin with '\%'.
---
contrib/hdtbl/groff_hdtbl.7.man | 2 +-
contrib/mm/groff_mm.7.man | 10 +++---
contrib/mom/groff_mom.7.man | 14 ++++----
contrib/rfc1345/groff_rfc1345.7.man | 2 +-
man/groff.7.man | 32 +++++++++----------
man/groff_font.5.man | 18 +++++------
man/groff_out.5.man | 2 +-
man/groff_tmac.5.man | 8 ++---
src/devices/grodvi/grodvi.1.man | 8 ++---
src/devices/grolbp/grolbp.1.man | 6 ++--
src/devices/grolj4/grolj4.1.man | 18 +++++------
src/devices/grolj4/lj4_font.5.man | 18 +++++------
src/devices/gropdf/gropdf.1.man | 20 ++++++------
src/devices/gropdf/pdfmom.1.man | 2 +-
src/devices/grops/grops.1.man | 18 +++++------
src/devices/grotty/grotty.1.man | 20 ++++++------
src/devices/xditview/gxditview.1.man | 6 ++--
src/preproc/eqn/eqn.1.man | 40 +++++++++++------------
src/preproc/grn/grn.1.man | 62 ++++++++++++++++++------------------
src/preproc/pic/pic.1.man | 24 +++++++-------
src/roff/groff/groff.1.man | 40 +++++++++++------------
src/roff/nroff/nroff.1.man | 18 +++++------
src/roff/troff/troff.1.man | 28 ++++++++--------
src/utils/afmtodit/afmtodit.1.man | 12 +++----
src/utils/hpftodit/hpftodit.1.man | 16 +++++-----
src/utils/pfbtops/pfbtops.1.man | 4 +--
src/utils/tfmtodit/tfmtodit.1.man | 4 +--
tmac/groff_man.7.man.in | 24 +++++++-------
tmac/groff_ms.7.man | 28 ++++++++--------
29 files changed, 252 insertions(+), 252 deletions(-)
diff --git a/contrib/hdtbl/groff_hdtbl.7.man b/contrib/hdtbl/groff_hdtbl.7.man
index 24a6ba45..10328e98 100644
--- a/contrib/hdtbl/groff_hdtbl.7.man
+++ b/contrib/hdtbl/groff_hdtbl.7.man
@@ -1183,7 +1183,7 @@ The following example sets up defaults suitable for
typical papers:
.
.PP
The file
-.I \%@EXAMPLEDIR@/\:hdtbl/\:\%common\:.roff
+.I @EXAMPLEDIR@/\:hdtbl/\:\%common\:.roff
provides another example setup
in the \[lq]minimal Page setup\[rq] section.
.
diff --git a/contrib/mm/groff_mm.7.man b/contrib/mm/groff_mm.7.man
index d83139f8..adab0aca 100644
--- a/contrib/mm/groff_mm.7.man
+++ b/contrib/mm/groff_mm.7.man
@@ -113,16 +113,16 @@ not
.P
This package can also be localized by site or territory;
for example,
-.I \%@MACRODIR@/\:@TMAC_M_PREFIX@mse\:.tmac
+.I @MACRODIR@/\:@TMAC_M_PREFIX@mse\:.tmac
illustrates how to adapt the output to a national standard using its ISO
3166 territory code.
.
Such a package can define a string that causes a macro file
-.IR \%@MACRODIR@/\:mm/\:\% territory _locale
+.IR @MACRODIR@/\:mm/\:\% territory _locale
to be loaded at package initialization.
.
If this mechanism is not used,
-.I \%@MACRODIR@/\:mm/\:\%locale
+.I @MACRODIR@/\:mm/\:\%locale
is loaded instead.
.
No diagnostic is produced if these files do not exist.
@@ -239,7 +239,7 @@ Defining a string with the same name as an
macro is not supported and may cause incorrect rendering,
the emission of diagnostic messages,
and an error exit status from
-.IR \%@g@troff .
+.IR @g@troff .
.
.
.\" ====================================================================
@@ -1150,7 +1150,7 @@ must be inside of a
pair, except if
.B EQ
is used to set options for
-.I \%@g@eqn
+.I @g@eqn
only.
.
The
diff --git a/contrib/mom/groff_mom.7.man b/contrib/mom/groff_mom.7.man
index ca8b3fb7..845d6167 100644
--- a/contrib/mom/groff_mom.7.man
+++ b/contrib/mom/groff_mom.7.man
@@ -182,23 +182,23 @@ usage.
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:om.tmac
+.I @MACRODIR@/\:om.tmac
\[en] the main macro file
.TQ
-.I \%@MACRODIR@/\:mom.tmac
+.I @MACRODIR@/\:mom.tmac
\[en] a wrapper file that calls om.tmac directly.
.
.TP
-.I \%@HTMLDOCDIR@/\:mom/\:toc.html
+.I @HTMLDOCDIR@/\:mom/\:toc.html
\[en] entry point to the HTML documentation
.
.TP
-.I \%@PDFDOCDIR@/\:mom\-pdf.pdf
+.I @PDFDOCDIR@/\:mom\-pdf.pdf
\[en] the PDF manual,
.I Producing PDFs with groff and mom
.
.TP
-.IR \%@EXAMPLEDIR@/\:mom/\: * .mom
+.IR @EXAMPLEDIR@/\:mom/\: * .mom
\[en] example files using mom
.
.
@@ -222,7 +222,7 @@ and
is very well documented in
.
.TP
-.I \%@HTMLDOCDIR@/\:mom/\:toc.html
+.I @HTMLDOCDIR@/\:mom/\:toc.html
\[en] entry point to the HTML documentation
.
.
@@ -3375,7 +3375,7 @@ team.
.\" ====================================================================
.
.TP
-.I \%@HTMLDOCDIR@/\:mom/\:toc\:.html
+.I @HTMLDOCDIR@/\:mom/\:toc\:.html
entry point to the HTML documentation
.
.
diff --git a/contrib/rfc1345/groff_rfc1345.7.man
b/contrib/rfc1345/groff_rfc1345.7.man
index 3bee9c9a..77ebd78f 100644
--- a/contrib/rfc1345/groff_rfc1345.7.man
+++ b/contrib/rfc1345/groff_rfc1345.7.man
@@ -201,7 +201,7 @@ producing subpar typography
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:rfc1345\:.tmac
+.I @MACRODIR@/\:rfc1345\:.tmac
implements the character mappings.
.
.
diff --git a/man/groff.7.man b/man/groff.7.man
index 19000619..873246c4 100644
--- a/man/groff.7.man
+++ b/man/groff.7.man
@@ -261,7 +261,7 @@ HTML,
DVI,
and PDF,
may be available in
-.IR \%@DOCDIR@ .
+.IR @DOCDIR@ .
.
.
.P
@@ -309,7 +309,7 @@ or terminal output.
.\" ====================================================================
.
Input to
-.I \%@g@troff
+.I @g@troff
must be in one of two character encodings it can recognize:
IBM code page 1047 on EBCDIC systems,
and ISO\~Latin-1 (8859-1) otherwise.
@@ -326,7 +326,7 @@ and the
preprocessor can transform other encodings,
including UTF-8,
to satisfy
-.IR \%@g@troff 's
+.IR @g@troff 's
requirements.
.
.
@@ -390,7 +390,7 @@ but suppresses the break implied by the
.request .trf ,
requests;
if the no-break control character is used with any of these requests,
-.I \%@g@troff
+.I @g@troff
suppresses the break;
instead the requested operation takes effect at the next break.
.
@@ -1103,7 +1103,7 @@ produces the same output commands.
.
Other delimiters can be used in place of the neutral apostrophes.
.
-.I \%@g@troff
+.I @g@troff
formats
.I s1
and
@@ -4217,7 +4217,7 @@ these are certain control characters
Unicode describes them).
.
When
-.I \%@g@troff
+.I @g@troff
encounters one in an identifier,
it produces a warning diagnostic of type
.RB \[lq] input \[rq]
@@ -4253,7 +4253,7 @@ and
.
.IP
Some of these code points are used by
-.I \%@g@troff
+.I @g@troff
internally,
making it non-trivial to extend the program to cover Unicode or other
character encodings that use characters from these ranges.
@@ -4911,21 +4911,21 @@ The sum of the numeric codes of currently enabled
warning categories.
.TPx
.REG .x
The major version number of the running
-.I \%@g@troff
+.I @g@troff
formatter.
.
.
.TPx
.REG .y
The minor version number of the running
-.I \%@g@troff
+.I @g@troff
formatter.
.
.
.TPx
.REG .Y
The revision number of the running
-.I \%@g@troff
+.I @g@troff
formatter.
.
.
@@ -5084,7 +5084,7 @@ argument.
.REG slimit
If >0,
sets the maximum quantity of objects on
-.IR \%@g@troff 's
+.IR @g@troff 's
internal input stack.
.
If \[<=]0,
@@ -5364,7 +5364,7 @@ macro,
string,
or diversion of the same name.
.
-.I \%@g@troff
+.I @g@troff
enters \[lq]copy mode\[rq]
(see below),
storing subsequent input lines as the definition.
@@ -5454,7 +5454,7 @@ Applying string interpolation to a macro does not change
this name.
.\" ====================================================================
.
When
-.I \%@g@troff
+.I @g@troff
processes certain requests,
most importantly those which define or append to a macro or string,
it does so in
@@ -5529,7 +5529,7 @@ is not an escape sequence in the usual sense.
In any escape sequence
.BI \[rs] X
that
-.I \%@g@troff
+.I @g@troff
does not recognize,
the escape character is ignored and
.IR X \~is
@@ -5568,7 +5568,7 @@ before
and
.RB \[lq] \[aq] \[rq]
where
-.I \%@g@troff
+.I @g@troff
expects them as control characters if you mean to use them literally.
.
.
@@ -6041,7 +6041,7 @@ system;
it manages the pipeline that carries a source document through
preprocessors,
the
-.I \%@g@troff
+.I @g@troff
formatter,
and an output driver to viewable or printable form.
.
diff --git a/man/groff_font.5.man b/man/groff_font.5.man
index 423d62fa..27049ed4 100644
--- a/man/groff_font.5.man
+++ b/man/groff_font.5.man
@@ -92,7 +92,7 @@ respectively).
.
.P
Device and font description files are read both by the formatter,
-.IR \%@g@troff ,
+.IR @g@troff ,
and by output drivers.
.
The programs delegate these files' processing to an internal
@@ -299,7 +299,7 @@ instead).
.TP
.B pass_filenames
Direct
-.I \%@g@troff
+.I @g@troff
to emit the name of the source file being processed.
.
This is achieved with the intermediate output command
@@ -458,7 +458,7 @@ driver uses this directive.
.
.TP
.B use_charnames_in_special
-.I \%@g@troff
+.I @g@troff
should encode named glyphs inside device control commands.
.
The
@@ -490,7 +490,7 @@ character set repertoire is described on a per-font basis.
.
.
.P
-.I \%@g@troff
+.I @g@troff
recognizes but ignores the directives
.BR spare1 ,
.BR spare2 ,
@@ -508,7 +508,7 @@ and
lines are mandatory.
.
Directives not listed above are ignored by
-.I \%@g@troff
+.I @g@troff
but may be used by postprocessors to obtain further information about
the device.
.
@@ -663,7 +663,7 @@ it is sought in any mounted fonts that bear this property.
.
.P
Other directives in this section are ignored by
-.IR \%@g@troff ,
+.IR @g@troff ,
but may be used by postprocessors to obtain further information about
the font.
.
@@ -929,7 +929,7 @@ The
.I entity-name
field defines an identifier for the glyph that the postprocessor
uses to print the
-.I \%@g@troff
+.I @g@troff
glyph
.IR name .
.
@@ -1011,13 +1011,13 @@ Most kerning pairs should have a negative value
.\" ====================================================================
.
.TP
-.IR \%@FONTDIR@/\:\%dev name /\:DESC
+.IR @FONTDIR@/\:\%dev name /\:DESC
describes the output device
.IR name .
.
.
.TP
-.IR \%@FONTDIR@/\:\%dev name / F
+.IR @FONTDIR@/\:\%dev name / F
describes the font known
.RI as\~ F
on device
diff --git a/man/groff_out.5.man b/man/groff_out.5.man
index f3753592..560766d1 100644
--- a/man/groff_out.5.man
+++ b/man/groff_out.5.man
@@ -1833,7 +1833,7 @@ are documented in
.\" ====================================================================
.
.TP
-.IR \%@FONTDIR@/\:\%dev name /\:DESC
+.IR @FONTDIR@/\:\%dev name /\:DESC
describes the output device
.IR name .
.
diff --git a/man/groff_tmac.5.man b/man/groff_tmac.5.man
index 0576274c..c511e607 100644
--- a/man/groff_tmac.5.man
+++ b/man/groff_tmac.5.man
@@ -514,7 +514,7 @@ It provides an interface to set the paper size on the
command line with
the option
.BI "\-d \%paper=" size
or
-.IR \%@g@troff .
+.IR @g@troff .
.
Possible values for
.I size
@@ -852,7 +852,7 @@ above the footnote separator and re-open them on the next
page.
.
.IP
See
-.UR file://\%@DOCDIR@/\:\%msboxes\:.pdf
+.UR file://@DOCDIR@/\:\%msboxes\:.pdf
\[lq]Using PDF boxes with
.I groff
and the
@@ -1075,7 +1075,7 @@ option.
.
.MR man 1
calls
-.I \%@g@soelim
+.I @g@soelim
automatically.
.
.
@@ -1120,7 +1120,7 @@ or
In both cases, the formatter should be called with option
.B \-s
to invoke
-.IR \%@g@soelim .
+.IR @g@soelim .
.IP
.EX
\fIsh#\fP groff \-s docu.roff
diff --git a/src/devices/grodvi/grodvi.1.man b/src/devices/grodvi/grodvi.1.man
index 3065105f..6e848efc 100644
--- a/src/devices/grodvi/grodvi.1.man
+++ b/src/devices/grodvi/grodvi.1.man
@@ -499,14 +499,14 @@ and
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devdvi/\:DESC
+.I @FONTDIR@/\:\%devdvi/\:DESC
describes the
.B dvi
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devdvi/ F
+.IR @FONTDIR@/\:\%devdvi/ F
describes the font known
.RI as\~ F
on device
@@ -514,7 +514,7 @@ on device
.
.
.TP
-.I \%@MACRODIR@/\:dvi\:.tmac
+.I @MACRODIR@/\:dvi\:.tmac
defines macros for use with the
.B dvi
output device.
@@ -527,7 +527,7 @@ output device is selected.
.
.
.TP
-.I \%@MACRODIR@/\:ec\:.tmac
+.I @MACRODIR@/\:ec\:.tmac
invokes requests to employ the EC
(rather than CM)
fonts.
diff --git a/src/devices/grolbp/grolbp.1.man b/src/devices/grolbp/grolbp.1.man
index 8d976739..eab12b65 100644
--- a/src/devices/grolbp/grolbp.1.man
+++ b/src/devices/grolbp/grolbp.1.man
@@ -455,14 +455,14 @@ and
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devlbp/\:DESC
+.I @FONTDIR@/\:\%devlbp/\:DESC
describes the
.B lbp
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devlbp/ F
+.IR @FONTDIR@/\:\%devlbp/ F
describes the font known
.RI as\~ F
on device
@@ -470,7 +470,7 @@ on device
.
.
.TP
-.I \%@MACRODIR@/\:lbp\:.tmac
+.I @MACRODIR@/\:lbp\:.tmac
defines macros for use with the
.B lbp
output device.
diff --git a/src/devices/grolj4/grolj4.1.man b/src/devices/grolj4/grolj4.1.man
index 22e94ed4..5103711e 100644
--- a/src/devices/grolj4/grolj4.1.man
+++ b/src/devices/grolj4/grolj4.1.man
@@ -238,14 +238,14 @@ and
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:DESC
+.I @FONTDIR@/\:\%devlj4/\:DESC
describes the
.B lj4
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devlj4/ F
+.IR @FONTDIR@/\:\%devlj4/ F
describes the font known
.RI as\~ F
on device
@@ -253,7 +253,7 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%Makefile
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%Makefile
is a
.MR make 1
script that uses
@@ -265,7 +265,7 @@ font descriptions in the event the TFM files are updated.
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.awk
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.awk
is an
.MR awk 1
script that corrects the Intellifont-based height metrics for several
@@ -276,20 +276,20 @@ later.
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%symbol\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%symbol\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:text\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:text\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%wingdings.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%wingdings.map
map MSL indices and HP Unicode Private Use Area assignments to
.I groff
special character identifiers.
.
.
.TP
-.I \%@MACRODIR@/\:lj4\:.tmac
+.I @MACRODIR@/\:lj4\:.tmac
defines macros for use with the
.B lj4
output device.
diff --git a/src/devices/grolj4/lj4_font.5.man
b/src/devices/grolj4/lj4_font.5.man
index e07d49b8..5d0505bb 100644
--- a/src/devices/grolj4/lj4_font.5.man
+++ b/src/devices/grolj4/lj4_font.5.man
@@ -202,7 +202,7 @@ and braces used by
.
A script,
located in
-.IR \%@FONTDIR@/\:\%devlj4/\:generate ,
+.IR @FONTDIR@/\:\%devlj4/\:generate ,
can be used to adjust the metrics for these glyphs in the special font
\[lq]S\[rq] for use with printers that have all TrueType fonts.
.
@@ -233,14 +233,14 @@ and one for more recent TFM files.
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:DESC
+.I @FONTDIR@/\:\%devlj4/\:DESC
describes the
.B lj4
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devlj4/\: F
+.IR @FONTDIR@/\:\%devlj4/\: F
describes the font known
.RI as\~ F
on device
@@ -248,7 +248,7 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%Makefile
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%Makefile
is a
.MR make 1
script that uses
@@ -260,7 +260,7 @@ font descriptions in the event the TFM files are updated.
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.awk
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.awk
is an
.MR awk 1
script that corrects the Intellifont-based height metrics for several
@@ -271,13 +271,13 @@ later.
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%symbol\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%symbol\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:text\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:text\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%wingdings.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%wingdings.map
map MSL indices and HP Unicode Private Use Area assignments to
.I groff
special character identifiers.
diff --git a/src/devices/gropdf/gropdf.1.man b/src/devices/gropdf/gropdf.1.man
index b132929a..34528a87 100644
--- a/src/devices/gropdf/gropdf.1.man
+++ b/src/devices/gropdf/gropdf.1.man
@@ -1495,14 +1495,14 @@ see
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devpdf/\:DESC
+.I @FONTDIR@/\:\%devpdf/\:DESC
describes the
.B pdf
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devpdf/ F
+.IR @FONTDIR@/\:\%devpdf/ F
describes the font known
.RI as\~ F
on device
@@ -1510,7 +1510,7 @@ on device
.
.
.TP
-.IR \%@FONTDIR@/\:\%devpdf/ U\-F
+.IR @FONTDIR@/\:\%devpdf/ U\-F
describes the font
from the URW foundry
(rather than the Adobe default)
@@ -1521,7 +1521,7 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devpdf/\%download
+.I @FONTDIR@/\:\%devpdf/\%download
lists fonts available for embedding within the PDF document
(by analogy to the
.B ps
@@ -1530,14 +1530,14 @@ device's downloadable font support).
.
.\" XXX: Why are we shipping this but not BuildFoundries.pl?
.TP
-.I \%@FONTDIR@/\:\%devpdf/\%Foundry
+.I @FONTDIR@/\:\%devpdf/\%Foundry
is a data file used by the
.I groff
build system to locate PostScript Type\~1 fonts.
.
.
.TP
-.I \%@FONTDIR@/\:\%devpdf/\:enc/\:\%text\:.enc
+.I @FONTDIR@/\:\%devpdf/\:enc/\:\%text\:.enc
describes the encoding scheme used by most PostScript Type\~1 fonts;
the
.B \%encoding
@@ -1548,7 +1548,7 @@ device refers to it.
.
.
.TP
-.I \%@MACRODIR@/\:pdf\:.tmac
+.I @MACRODIR@/\:pdf\:.tmac
defines macros for use with the
.B pdf
output device.
@@ -1561,7 +1561,7 @@ output device is selected.
.
.
.TP
-.I \%@MACRODIR@/\:\%pdfpic\:.tmac
+.I @MACRODIR@/\:\%pdfpic\:.tmac
defines the
.B PDFPIC
macro for embedding images in a document;
@@ -1587,9 +1587,9 @@ It is automatically loaded by
.\" ====================================================================
.
.TP
-.I \%@DOCDIR@/\:\%sboxes/\:\%msboxes\:.ms
+.I @DOCDIR@/\:\%sboxes/\:\%msboxes\:.ms
.TQ
-.I \%@DOCDIR@/\:\%sboxes/\:\%msboxes\:.pdf
+.I @DOCDIR@/\:\%sboxes/\:\%msboxes\:.pdf
\[lq]Using PDF boxes with
.I groff
and the
diff --git a/src/devices/gropdf/pdfmom.1.man b/src/devices/gropdf/pdfmom.1.man
index 69f28062..d34945d9 100644
--- a/src/devices/gropdf/pdfmom.1.man
+++ b/src/devices/gropdf/pdfmom.1.man
@@ -191,7 +191,7 @@ Peter Schaffter
.\" ====================================================================
.
.TP
-.I \%@PDFDOCDIR@/\:mom\-pdf.pdf
+.I @PDFDOCDIR@/\:mom\-pdf.pdf
\[lq]Producing PDFs with
.I groff
and
diff --git a/src/devices/grops/grops.1.man b/src/devices/grops/grops.1.man
index 8ad8d65b..a9f43ad9 100644
--- a/src/devices/grops/grops.1.man
+++ b/src/devices/grops/grops.1.man
@@ -409,7 +409,7 @@ font is not to be reencoded.
This code can be used with the
.B \[rs]N
escape sequence in
-.I \%@g@troff
+.I @g@troff
to select the character,
even if the character does not have a
.I groff
@@ -1579,14 +1579,14 @@ see
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:DESC
+.I @FONTDIR@/\:\%devps/\:DESC
describes the
.B ps
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devps/ F
+.IR @FONTDIR@/\:\%devps/ F
describes the font known
.RI as\~ F
on device
@@ -1594,13 +1594,13 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:\%download
+.I @FONTDIR@/\:\%devps/\:\%download
lists fonts available for embedding within the PostScript document
(or download to the device).
.
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:text.enc
+.I @FONTDIR@/\:\%devps/\:text.enc
describes the encoding scheme used by most PostScript Type\~1 fonts;
the
.B \%encoding
@@ -1611,14 +1611,14 @@ device refers to it.
.
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:\%generate/\:textmap
+.I @FONTDIR@/\:\%devps/\:\%generate/\:textmap
maps names in the Adobe Glyph List to
.I groff
special character identifiers.
.
.
.TP
-.I \%@MACRODIR@/\:ps.tmac
+.I @MACRODIR@/\:ps.tmac
defines macros for use with the
.B ps
output device.
@@ -1631,7 +1631,7 @@ output device is selected.
.
.
.TP
-.I \%@MACRODIR@/\:pspic.tmac
+.I @MACRODIR@/\:pspic.tmac
defines the
.B PSPIC
macro for embedding images in a document;
@@ -1643,7 +1643,7 @@ It is automatically loaded by
.
.
.TP
-.I \%@MACRODIR@/psold.tmac
+.I @MACRODIR@/psold.tmac
provides replacement glyphs for text fonts that lack complete coverage
of the ISO Latin-1 character set;
using it,
diff --git a/src/devices/grotty/grotty.1.man b/src/devices/grotty/grotty.1.man
index ae70b2dc..fa9b9a80 100644
--- a/src/devices/grotty/grotty.1.man
+++ b/src/devices/grotty/grotty.1.man
@@ -560,14 +560,14 @@ see subsection \[lq]Legacy output format\[rq] above.
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devascii/\:DESC
+.I @FONTDIR@/\:\%devascii/\:DESC
describes the
.B ascii
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devascii/ F
+.IR @FONTDIR@/\:\%devascii/ F
describes the font known
.RI as\~ F
on device
@@ -575,14 +575,14 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devcp1047/\:DESC
+.I @FONTDIR@/\:\%devcp1047/\:DESC
describes the
.B cp1047
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devcp1047/ F
+.IR @FONTDIR@/\:\%devcp1047/ F
describes the font known
.RI as\~ F
on device
@@ -590,14 +590,14 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devlatin1/\:DESC
+.I @FONTDIR@/\:\%devlatin1/\:DESC
describes the
.B latin1
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devlatin1/ F
+.IR @FONTDIR@/\:\%devlatin1/ F
describes the font known
.RI as\~ F
on device
@@ -605,14 +605,14 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devutf8/\:DESC
+.I @FONTDIR@/\:\%devutf8/\:DESC
describes the
.B utf8
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devutf8/ F
+.IR @FONTDIR@/\:\%devutf8/ F
describes the font known
.RI as\~ F
on device
@@ -620,7 +620,7 @@ on device
.
.
.TP
-.I \%@MACRODIR@/\:tty\:.tmac
+.I @MACRODIR@/\:tty\:.tmac
defines macros for use with the
.BR ascii ,
.BR cp1047 ,
@@ -635,7 +635,7 @@ when any of those output devices is selected.
.
.
.TP
-.I \%@MACRODIR@/\:tty\-char\:.tmac
+.I @MACRODIR@/\:tty\-char\:.tmac
defines fallback characters for use with
.I grotty.
.
diff --git a/src/devices/xditview/gxditview.1.man
b/src/devices/xditview/gxditview.1.man
index 8aa83b70..27487038 100644
--- a/src/devices/xditview/gxditview.1.man
+++ b/src/devices/xditview/gxditview.1.man
@@ -85,7 +85,7 @@ intermediate output format of
documented in
.MR groff_out @MAN5EXT@ ,
is produced by
-.I \%@g@troff
+.I @g@troff
or the
.B \-Z
option to
@@ -578,9 +578,9 @@ and
.\" ====================================================================
.
.TP
-.I \%@APPRESDIR@/\:\%GXditview
+.I @APPRESDIR@/\:\%GXditview
.TQ
-.I \%@APPRESDIR@/\:\%GXditview\-color
+.I @APPRESDIR@/\:\%GXditview\-color
The default resource files of
.IR gxditview .
.
diff --git a/src/preproc/eqn/eqn.1.man b/src/preproc/eqn/eqn.1.man
index e28bc541..af5092bb 100644
--- a/src/preproc/eqn/eqn.1.man
+++ b/src/preproc/eqn/eqn.1.man
@@ -84,7 +84,7 @@ is part of the
.MR groff @MAN7EXT@
document formatting system.
.
-.I \%@g@eqn
+.I @g@eqn
is a
.MR @g@troff @MAN1EXT@
preprocessor that translates descriptions of equations embedded in
@@ -103,7 +103,7 @@ and
are interpreted as equation descriptions.
.
Normally,
-.I \%@g@eqn
+.I @g@eqn
is not executed directly by the user,
but invoked by specifying the
.B \-e
@@ -115,7 +115,7 @@ While GNU
input syntax is highly compatible with AT&T
.IR eqn , \" AT&T
the output
-.I \%@g@eqn
+.I @g@eqn
produces cannot be processed by AT&T
.IR troff ; \" AT&T
GNU
@@ -139,7 +139,7 @@ the standard input stream is read.
Unless the
.B \-R
option is given,
-.I \%@g@eqn
+.I @g@eqn
searches for the file
.I eqnrc
in the directories given with the
@@ -152,7 +152,7 @@ and finally in the standard macro directory
.IR @MACRODIR@ .
.
If it exists,
-.I \%@g@eqn
+.I @g@eqn
processes it before the other input files.
.
.
@@ -342,7 +342,7 @@ intended to have semantics like
CSS \[lq]large\[rq].
.
In
-.I \%@g@troff
+.I @g@troff
output,
the point size is increased by\~5;
in MathML output,
@@ -784,7 +784,7 @@ set x_height 45
.
.IP
says that
-.I \%@g@eqn
+.I @g@eqn
should assume an x\~height of 0.45\~ems.
.
.
@@ -800,7 +800,7 @@ definitive.
.
.TP
.B minimum_size
-.I \%@g@eqn
+.I @g@eqn
won't set anything at a smaller point size than this.
.
The value is in points.
@@ -1242,7 +1242,7 @@ and
.SS Fonts
.\" ====================================================================
.
-.I \%@g@eqn
+.I @g@eqn
normally uses at least two fonts to set an equation:
an italic font for letters,
and a roman font for everything else.
@@ -1366,7 +1366,7 @@ command.
Set the minimum point size
.RI to\~ n .
.
-.I \%@g@eqn
+.I @g@eqn
will not reduce the size of subscripts or superscripts to
a smaller size
.RI than\~ n .
@@ -1386,7 +1386,7 @@ before the default directories.
Don't allow newlines within delimiters.
.
This option allows
-.I \%@g@eqn
+.I @g@eqn
to recover better from missing closing delimiters.
.
.
@@ -1399,7 +1399,7 @@ smaller than the surrounding text.
This option is deprecated.
.
Normally,
-.I \%@g@eqn
+.I @g@eqn
sets subscripts and superscripts at 70% of the size of the surrounding
text.
.
@@ -1423,7 +1423,7 @@ This is equivalent to a
command.
.
This option is deprecated.
-.I \%@g@eqn
+.I @g@eqn
normally sets equations at whatever the current point size is when the
equation is encountered.
.
@@ -1444,7 +1444,7 @@ uses this to provide definitions appropriate for the
output driver.
However,
if the specified driver is \[lq]MathML\[rq],
the output is MathML markup rather than
-.I \%@g@troff
+.I @g@troff
commands,
and
.I eqnrc
@@ -1459,7 +1459,7 @@ The default output driver is
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:\%eqnrc
+.I @MACRODIR@/\:\%eqnrc
Initialization file.
.
.
@@ -1473,13 +1473,13 @@ be rendered.
.
It does not support fine control of motions and sizes to the same
degree
-.I \%@g@troff
+.I @g@troff
does.
.
Thus:
.
.IP \[bu]
-.I \%@g@eqn
+.I @g@eqn
parameters have no effect on the generated MathML.
.
.IP \[bu]
@@ -1501,7 +1501,7 @@ as centering on the math axis is the MathML default.
.
.IP \[bu]
Characters that
-.I \%@g@eqn
+.I @g@eqn
sets extra large in
.I troff \" mode
mode\[em]notably the integral sign\[em]may appear too small and need to
@@ -1512,7 +1512,7 @@ have their \[lq]<mstyle>\[rq] wrappers adjusted by hand.
As in its
.I troff \" mode
mode,
-.I \%@g@eqn
+.I @g@eqn
in MathML mode leaves the
.B .EQ
and
@@ -1528,7 +1528,7 @@ be recognized as strings that begin with \[lq]<math>\[rq]
and end with
.
.LP
See section \[lq]Bugs\[rq] below for translation limits specific to
-.IR \%@g@eqn .
+.IR @g@eqn .
.
.
.\" ====================================================================
diff --git a/src/preproc/grn/grn.1.man b/src/preproc/grn/grn.1.man
index f740c4de..d12e1bc0 100644
--- a/src/preproc/grn/grn.1.man
+++ b/src/preproc/grn/grn.1.man
@@ -67,14 +67,14 @@
.SH Description
.\" ====================================================================
.
-.I \%@g@grn
+.I @g@grn
is a preprocessor for including
.I gremlin
pictures in
.MR @g@troff @MAN1EXT@
input.
.
-.I \%@g@grn
+.I @g@grn
writes to standard output,
processing only input lines between two that start with
.B .GS
@@ -82,7 +82,7 @@ and
.BR .GE .
.
Those lines must contain
-.I \%@g@grn
+.I @g@grn
commands
(see below).
.
@@ -90,7 +90,7 @@ These macros request a
.I gremlin
file;
the picture in that file is converted and placed in the
-.I \%@g@troff
+.I @g@troff
input stream.
.
.B .GS
@@ -117,7 +117,7 @@ the position on the page is the bottom of the
picture.
.
If the
-.I \%@g@grn
+.I @g@grn
entry is ended with
.B .GF
instead of
@@ -136,7 +136,7 @@ and
.
.
.PP
-.I \%@g@grn
+.I @g@grn
produces drawing escape sequences that use
.IR groff 's
color scheme extension
@@ -154,7 +154,7 @@ Each input line between
and
.B .GE
may have one
-.I \%@g@grn
+.I @g@grn
command.
.
Commands consist of one or two strings separated by white space,
@@ -215,7 +215,7 @@ Set the roman
bold,
or special)
font to
-.IR \%@g@troff 's
+.IR @g@troff 's
font
.I f
(either a name or number).
@@ -232,7 +232,7 @@ respectively).
.TQ
.BI stipple\~ f
Set the stipple font to
-.IR \%@g@troff 's
+.IR @g@troff 's
stipple font
.I f
(name or number).
@@ -317,7 +317,7 @@ Setting
.B pointscale
will cause the point sizes to scale with the picture
(within
-.IR \%@g@troff 's
+.IR @g@troff 's
limitations,
of course).
.
@@ -333,7 +333,7 @@ picture.
.
This is meant to be used as a global parameter setting mechanism at
the beginning of the
-.I \%@g@troff
+.I @g@troff
input file,
but can be used at any time to reset the default settings.
.
@@ -406,7 +406,7 @@ line.
.\" ====================================================================
.
Since
-.I \%@g@grn
+.I @g@grn
is a preprocessor,
it doesn't know about current indentation,
point sizes,
@@ -416,7 +416,7 @@ and so on.
.
Consequently,
no
-.I \%@g@troff
+.I @g@troff
input can be placed between the
.B .GS
and
@@ -426,9 +426,9 @@ macros.
However,
.I gremlin
text is now processed by
-.IR \%@g@troff ,
+.IR @g@troff ,
so anything valid in a single line of
-.I \%@g@troff
+.I @g@troff
input is valid in a line of
.I gremlin
text
@@ -449,17 +449,17 @@ expressions enclosed by previously defined delimiters
.
.PP
When using
-.I \%@g@grn
+.I @g@grn
along with other preprocessors,
it is best to run
.MR @g@tbl @MAN1EXT@
before
-.IR \%@g@grn ,
+.IR @g@grn ,
.MR @g@pic @MAN1EXT@ ,
and/or
.I ideal \" no GNU version yet
to avoid overworking
-.IR \%@g@tbl .
+.IR @g@tbl .
.
.MR @g@eqn @MAN1EXT@
should always be run last.
@@ -468,7 +468,7 @@ should always be run last.
.PP
A picture is considered an entity,
but that doesn't stop
-.I \%@g@troff
+.I @g@troff
from trying to break it up if it falls off the end of a page.
.
Placing the picture between \[lq]keeps\[rq] in the
@@ -477,9 +477,9 @@ macros will ensure proper placement.
.
.
.PP
-.I \%@g@grn
+.I @g@grn
uses
-.IR \%@g@troff 's
+.IR @g@troff 's
registers
.B g1
through
@@ -519,7 +519,7 @@ file does not contain negative coordinates,
either format will be read correctly by either version of
.I gremlin
or
-.IR \%@g@grn .
+.IR @g@grn .
.
The other difference in
Sun/X11 format is the use of names for picture objects
@@ -729,7 +729,7 @@ nB l.
.
.IP
If you're using
-.I \%@g@grn
+.I @g@grn
to run your pictures through
.IR groff ,
the font is really just a starting font.
@@ -804,7 +804,7 @@ writes out coordinates using the
format \[lq]%f1.2\[rq];
it's probably a good idea to use the same format if you want to modify
the
-.I \%@g@grn
+.I @g@grn
code.
.
.
@@ -861,10 +861,10 @@ files.
.
The default search path is the current directory,
the home directory,
-.IR \%@SYSTEMMACRODIR@ ,
-.IR \%@LOCALMACRODIR@ ,
+.IR @SYSTEMMACRODIR@ ,
+.IR @LOCALMACRODIR@ ,
and
-.IR \%@MACRODIR@ ,
+.IR @MACRODIR@ ,
in that order.
.
.
@@ -879,10 +879,10 @@ is the name of the output driver)
for the
.I DESC
file before the default font directories
-.IR \%@LOCALFONTDIR@ ,
-.IR \%@FONTDIR@ ,
+.IR @LOCALFONTDIR@ ,
+.IR @FONTDIR@ ,
and
-.IR \%@LEGACYFONTDIR@ .
+.IR @LEGACYFONTDIR@ .
.
.
.TP
@@ -918,7 +918,7 @@ even when followed by a character other than space or
newline.
.\" ====================================================================
.
.TP
-.IR \%@FONTDIR@/\:\%dev name /\:DESC
+.IR @FONTDIR@/\:\%dev name /\:DESC
describes the output device
.IR name .
.
diff --git a/src/preproc/pic/pic.1.man b/src/preproc/pic/pic.1.man
index 32c24334..3c616f98 100644
--- a/src/preproc/pic/pic.1.man
+++ b/src/preproc/pic/pic.1.man
@@ -87,7 +87,7 @@ is part of the
.MR groff @MAN1EXT@
document formatting system.
.
-.I \%@g@pic
+.I @g@pic
is a
.MR @g@troff @MAN1EXT@
preprocessor that compiles descriptions of diagrammatic pictures
@@ -108,7 +108,7 @@ or
are interpreted as picture descriptions.
.
Ending a
-.I \%@g@pic
+.I @g@pic
picture with
.B .PE
leaves the page position at the bottom of the picture;
@@ -117,7 +117,7 @@ ending it with
leaves the position at the top.
.
Normally,
-.I \%@g@pic
+.I @g@pic
is not executed directly by the user,
but invoked by specifying the
.B \-p
@@ -229,7 +229,7 @@ The extensions are described in
The
.B \-n
option also causes
-.I \%@g@pic
+.I @g@pic
not to use zero-length lines to draw dots in
.I troff \" generic
mode.
@@ -272,7 +272,7 @@ are ignored:
.TP
.B \-D
Draw all lines using the \[rs]D escape sequence.
-.I \%@g@pic
+.I @g@pic
always does this.
.
.TP
@@ -285,7 +285,7 @@ device
This is unnecessary because the
.I troff \" generic
output generated by
-.I \%@g@pic
+.I @g@pic
is device-independent.
.
.
@@ -319,7 +319,7 @@ A complete documentation is available in the file
option.
.
In \*[tx] mode,
-.I \%@g@pic
+.I @g@pic
will define a vbox called
.B \[rs]graph
for each picture.
@@ -695,7 +695,7 @@ is used.
Attributes can be specified in the same way as for a normal text
object.
Be very careful that you specify an appropriate format string;
-.I \%@g@pic
+.I @g@pic
does only very limited checking of the string.
.
This is deprecated in favour of
@@ -1214,7 +1214,7 @@ The picture is then available in the box
.
.
.LP
-.I \%@g@pic
+.I @g@pic
assumes that at the beginning of a picture both glyph and fill color are
set to the default value.
.
@@ -1237,7 +1237,7 @@ Solid arrow heads are always filled with the current
outline color.
The
.I troff
output of
-.I \%@g@pic
+.I @g@pic
is device-independent.
.
The
@@ -1297,7 +1297,7 @@ for i = 1 to 4 do {
.\" ====================================================================
.
To obtain a stand-alone picture from a
-.I \%@g@pic
+.I @g@pic
file,
enclose your
.I pic \" language
@@ -1479,7 +1479,7 @@ which interprets 0 as black and 1 as white.
.\" ====================================================================
.
.TP
-.I \%@DOCDIR@/\:pic\:.ps
+.I @DOCDIR@/\:pic\:.ps
\[lq]Making Pictures with GNU pic\[rq],
by Eric S.\& Raymond.
.
diff --git a/src/roff/groff/groff.1.man b/src/roff/groff/groff.1.man
index 78e75e24..ed046125 100644
--- a/src/roff/groff/groff.1.man
+++ b/src/roff/groff/groff.1.man
@@ -143,7 +143,7 @@ the two programs share a set of options.
However,
.I groff
has some options that
-.I \%@g@troff
+.I @g@troff
does not share,
and others which
.I groff
@@ -151,7 +151,7 @@ interprets differently.
.
At the same time,
not all valid
-.I \%@g@troff
+.I @g@troff
options can be given to
.IR groff .
.
@@ -161,7 +161,7 @@ options can be given to
.\" ====================================================================
.
The following options either do not exist for
-.I \%@g@troff
+.I @g@troff
or are interpreted differently by
.IR groff .
.
@@ -202,7 +202,7 @@ implies
.TP
.BI \-I\~ dir
Works as
-.IR \%@g@troff 's
+.IR @g@troff 's
option
(see below),
but also implies
@@ -214,7 +214,7 @@ It is passed to
.MR @g@soelim @MAN1EXT@
and the output driver,
and
-.I \%@g@grn
+.I @g@grn
is passed an
.B \-M
option with
@@ -345,9 +345,9 @@ Run
preprocessor.
.
No mechanism is provided for passing arguments to
-.I \%@g@refer
+.I @g@refer
because most
-.I \%@g@refer
+.I @g@refer
options have equivalent language elements that can be specified within
the document.
.
@@ -380,13 +380,13 @@ preprocessor.
.TP
.BI \-T\~ dev
Direct
-.I \%@g@troff
+.I @g@troff
to format the input for the output device
.IR dev .
.
.I groff
then calls an output driver to convert
-.IR \%@g@troff 's
+.IR @g@troff 's
output to a form appropriate for
.IR dev ;
see subsection \[lq]Output devices\[rq] below.
@@ -398,9 +398,9 @@ Operate in unsafe mode:
pass the
.B \-U
option to
-.I \%@g@pic
+.I @g@pic
and
-.IR \%@g@troff .
+.IR @g@troff .
.
See
.BR \-S .
@@ -444,7 +444,7 @@ display.
.B \-Z
Disable postprocessing.
.
-.I \%@g@troff
+.I @g@troff
output will appear on the standard output stream
(unless suppressed with
.BR \-z );
@@ -496,7 +496,7 @@ Define string.
.TP
.B \-E
Inhibit
-.I \%@g@troff
+.I @g@troff
error messages;
implies
.BR \-Ww .
@@ -575,7 +575,7 @@ emission of warnings in category
.TP
.B \-z
Suppress formatted device-independent output of
-.IR \%@g@troff .
+.IR @g@troff .
.
.
.\" ====================================================================
@@ -594,7 +594,7 @@ output drivers
(or \[lq]postprocessors\[rq]),
a suite of utilities,
and the formatter
-.I \%@g@troff
+.I @g@troff
at its heart.
.
See
@@ -746,7 +746,7 @@ It is even.
In GNU
.IR roff ,
the page dimensions for the formatter
-.I \%@g@troff
+.I @g@troff
and for output devices are handled separately.
.
In the formatter,
@@ -1095,7 +1095,7 @@ is a modern package written by Peter Schaffter
specifically for GNU
.IR roff .
.
Consult the
-.UR file://\:\%@HTMLDOCDIR@/\:mom/\:toc\:.html
+.UR file://\:@HTMLDOCDIR@/\:mom/\:toc\:.html
.I mom
HTML manual
.UE
@@ -1178,7 +1178,7 @@ programs as well as many extensions.
The command-line option
.B \-C
switches
-.I \%@g@troff
+.I @g@troff
into
.IR "compatibility mode" ,
which tries to emulate AT&T
@@ -1212,7 +1212,7 @@ in a page description language whose syntax is detailed in
.SS "Output devices"
.\" ====================================================================
.
-.I \%@g@troff
+.I @g@troff
output is formatted for a particular
.IR "output device" ,
typically specified by the
@@ -1331,7 +1331,7 @@ and a
.\" ====================================================================
.
Any program that interprets the output of
-.I \%@g@troff
+.I @g@troff
is a GNU
.I roff
postprocessor.
diff --git a/src/roff/nroff/nroff.1.man b/src/roff/nroff/nroff.1.man
index 2f134316..fd0544bf 100644
--- a/src/roff/nroff/nroff.1.man
+++ b/src/roff/nroff/nroff.1.man
@@ -85,7 +85,7 @@
.SH Description
.\" ====================================================================
.
-.I \%@g@nroff
+.I @g@nroff
formats documents written in the
.MR groff @MAN7EXT@
language for typewriter-like devices such as terminal emulators.
@@ -97,7 +97,7 @@ emulates the AT&T
command using
.MR groff @MAN1EXT@ .
.
-.I \%@g@nroff
+.I @g@nroff
generates output via
.MR grotty @MAN1EXT@ ,
.IR groff 's
@@ -122,7 +122,7 @@ environment variable nor the
command-line option
(which overrides the environment variable)
specifies a (valid) device,
-.I \%@g@nroff
+.I @g@nroff
consults the locale to select an appropriate output device.
.
It first tries the
@@ -167,7 +167,7 @@ and
respectively;
.B \-c
is also interpreted directly by
-.IR \%@g@troff .
+.IR @g@troff .
.
In addition,
this implementation ignores the AT&T
@@ -194,7 +194,7 @@ are documented in
.
.B \-V
causes
-.I \%@g@nroff
+.I @g@nroff
to display the constructed
.I groff
command on the standard output stream,
@@ -204,7 +204,7 @@ but does not execute it.
and
.B \-\-version
show version information about
-.I \%@g@nroff
+.I @g@nroff
and the programs it runs,
while
.B \-\-help
@@ -216,7 +216,7 @@ all exit afterward.
.SH "Exit status"
.\" ====================================================================
.
-.I \%@g@nroff
+.I @g@nroff
exits with error
.RB status\~ 2
if there was a problem parsing its arguments,
@@ -256,7 +256,7 @@ executable before searching in
.IR PATH .
.
If unset,
-.I \%@BINDIR@
+.I @BINDIR@
is used.
.
.
@@ -290,7 +290,7 @@ or the values specified are invalid.
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:\%tty\-char\:.tmac
+.I @MACRODIR@/\:\%tty\-char\:.tmac
Character definitions from this file are loaded to replace
unrepresentable glyphs.
.
diff --git a/src/roff/troff/troff.1.man b/src/roff/troff/troff.1.man
index 77efd608..ea94b8b6 100644
--- a/src/roff/troff/troff.1.man
+++ b/src/roff/troff/troff.1.man
@@ -90,7 +90,7 @@ transforms
.MR groff @MAN7EXT@
language input into the device-independent output format described in
.MR groff_out @MAN5EXT@ ;
-.I \%@g@troff
+.I @g@troff
is thus the heart of the GNU
.I roff
document formatting system.
@@ -166,12 +166,12 @@ output are subject to change.
.TP
.B \-b
Write a backtrace reporting the state of
-.IR \%@g@troff 's
+.IR @g@troff 's
input parser to the standard error stream with each diagnostic message.
.
The line numbers given in the backtrace might not always be correct,
because
-.IR \%@g@troff 's
+.IR @g@troff 's
idea of line numbers can be confused by requests that append to strings
or macros.
.
@@ -220,7 +220,7 @@ identifier.
.TP
.B \-E
Inhibit
-.I \%@g@troff
+.I @g@troff
error messages;
implies
.BR \-Ww .
@@ -356,7 +356,7 @@ and
means print every page from
.IR n \~on.
.
-.I \%@g@troff
+.I @g@troff
stops processing and exits after formatting the last page enumerated in
.IR list .
.
@@ -459,7 +459,7 @@ Suppress formatted output.
.\" BEGIN Keep parallel with groff.texi node "Warnings".
.\" Caveat: the Texinfo manual sorts them by number, not name.
Warning diagnostics emitted by
-.I \%@g@troff
+.I @g@troff
are divided into named,
numbered categories.
.
@@ -749,7 +749,7 @@ it is a semicolon (;).
A list of directories in which to seek the selected output device's
directory of device and font description files.
.
-.I \%@g@troff
+.I @g@troff
will scan directories given as arguments to any specified
.B \-F
options before these,
@@ -766,7 +766,7 @@ after them.
.I GROFF_TMAC_PATH
A list of directories in which to search for macro files.
.
-.I \%@g@troff
+.I @g@troff
will scan directories given as arguments to any specified
.B \-M
options before these,
@@ -823,7 +823,7 @@ see
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:\%troffrc
+.I @MACRODIR@/\:\%troffrc
is an initialization macro file loaded before any macro packages
specified with
.B \-m
@@ -831,7 +831,7 @@ options.
.
.
.TP
-.I \%@MACRODIR@/\:\%troffrc\-end
+.I @MACRODIR@/\:\%troffrc\-end
is an initialization macro file loaded after all macro packages
specified with
.B \-m
@@ -839,19 +839,19 @@ options.
.
.
.TP
-.IR \%@MACRODIR@/\: name \:.tmac
+.IR @MACRODIR@/\: name \:.tmac
are macro files distributed with
.IR groff .
.
.
.TP
-.IR \%@FONTDIR@/\:\%dev name /\:DESC
+.IR @FONTDIR@/\:\%dev name /\:DESC
describes the output device
.IR name .
.
.
.TP
-.IR \%@FONTDIR@/\:\%dev name / F
+.IR @FONTDIR@/\:\%dev name / F
describes the font
.I F
of device
@@ -955,7 +955,7 @@ device and font description files.
.TP
.MR groff_out @MAN5EXT@
describes the format of
-.IR \%@g@troff 's
+.IR @g@troff 's
output.
.
.
diff --git a/src/utils/afmtodit/afmtodit.1.man
b/src/utils/afmtodit/afmtodit.1.man
index 6c2ced4d..02c8d223 100644
--- a/src/utils/afmtodit/afmtodit.1.man
+++ b/src/utils/afmtodit/afmtodit.1.man
@@ -191,7 +191,7 @@ it is best to access them with glyph names only.
.P
If the font is downloadable to the device as a file,
it may be listed in the file
-.IR \%@FONTDIR@/\:\%devps/\:\%download ;
+.IR @FONTDIR@/\:\%devps/\:\%download ;
see
.MR grops @MAN1EXT@ .
.
@@ -434,14 +434,14 @@ Don't use the built-in Adobe Glyph List.
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:DESC
+.I @FONTDIR@/\:\%devps/\:DESC
describes the
.B ps
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devps/ F
+.IR @FONTDIR@/\:\%devps/ F
describes the font known
.RI as\~ F
on device
@@ -449,13 +449,13 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:\%download
+.I @FONTDIR@/\:\%devps/\:\%download
lists fonts available for embedding within the PostScript document
(or download to the device).
.
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:text.enc
+.I @FONTDIR@/\:\%devps/\:text.enc
describes the encoding scheme used by most PostScript Type\~1 fonts;
the
.B \%encoding
@@ -466,7 +466,7 @@ device refers to it.
.
.
.TP
-.I \%@FONTDIR@/\:\%devps/\:\%generate/\:\%textmap
+.I @FONTDIR@/\:\%devps/\:\%generate/\:\%textmap
maps names in the Adobe Glyph List to
.I groff
special character identifiers.
diff --git a/src/utils/hpftodit/hpftodit.1.man
b/src/utils/hpftodit/hpftodit.1.man
index 81a03e0e..c2e7b456 100644
--- a/src/utils/hpftodit/hpftodit.1.man
+++ b/src/utils/hpftodit/hpftodit.1.man
@@ -391,14 +391,14 @@ the search order is reversed.
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:DESC
+.I @FONTDIR@/\:\%devlj4/\:DESC
describes the
.B lj4
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devlj4/ F
+.IR @FONTDIR@/\:\%devlj4/ F
describes the font known
.RI as\~ F
on device
@@ -406,7 +406,7 @@ on device
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%Makefile
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%Makefile
is a
.MR make 1
script that uses
@@ -418,7 +418,7 @@ font descriptions in the event the TFM files are updated.
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.awk
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.awk
is an
.MR awk 1
script that corrects the Intellifont-based height metrics for several
@@ -429,13 +429,13 @@ later.
.
.
.TP
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%special\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%symbol\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%symbol\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:text\:.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:text\:.map
.TQ
-.I \%@FONTDIR@/\:\%devlj4/\:\%generate/\:\%wingdings.map
+.I @FONTDIR@/\:\%devlj4/\:\%generate/\:\%wingdings.map
map MSL indices and HP Unicode Private Use Area assignments to
.I groff
special character identifiers.
diff --git a/src/utils/pfbtops/pfbtops.1.man b/src/utils/pfbtops/pfbtops.1.man
index 35b48b7f..a3e3f715 100644
--- a/src/utils/pfbtops/pfbtops.1.man
+++ b/src/utils/pfbtops/pfbtops.1.man
@@ -75,9 +75,9 @@ PostScript fonts for MS-DOS were historically supplied in PFB
format.
The resulting PFA font can be used with
.MR groff @MAN1EXT@
if it is first listed in
-.I \%@FONTDIR@/\:\%devps/\:\%download
+.I @FONTDIR@/\:\%devps/\:\%download
and
-.IR \%@FONTDIR@/\:\%devpdf/\:\%download .
+.IR @FONTDIR@/\:\%devpdf/\:\%download .
.
.
The
diff --git a/src/utils/tfmtodit/tfmtodit.1.man
b/src/utils/tfmtodit/tfmtodit.1.man
index 372c66ef..b74a50ba 100644
--- a/src/utils/tfmtodit/tfmtodit.1.man
+++ b/src/utils/tfmtodit/tfmtodit.1.man
@@ -270,14 +270,14 @@ directive to the font description file.
.\" ====================================================================
.
.TP
-.I \%@FONTDIR@/\:\%devdvi/\:DESC
+.I @FONTDIR@/\:\%devdvi/\:DESC
describes the
.B dvi
output device.
.
.
.TP
-.IR \%@FONTDIR@/\:\%devdvi/ F
+.IR @FONTDIR@/\:\%devdvi/ F
describes the font known
.RI as\~ F
on device
diff --git a/tmac/groff_man.7.man.in b/tmac/groff_man.7.man.in
index 6f7e39fd..490ca62e 100644
--- a/tmac/groff_man.7.man.in
+++ b/tmac/groff_man.7.man.in
@@ -1236,7 +1236,7 @@ URIs can be lengthy;
rendering them can result in jarring adjustment or variations in line
length,
or
-.I \%@g@troff
+.I @g@troff
warnings when a hyperlink is longer than an output line.
.
The application of non-printing break point escape sequences
@@ -2203,9 +2203,9 @@ _endif()dnl
.\" ====================================================================
.
When a preprocessor like
-.I \%@g@tbl
+.I @g@tbl
or
-.I \%@g@eqn
+.I @g@eqn
is needed,
a hint can be given to the man page librarian by making the first line
of a man page look like this:
@@ -2228,12 +2228,12 @@ The
.I word
consists of one letter for each needed preprocessor:
\(lqe\(rq for
-.IR \%@g@eqn ,
+.IR @g@eqn ,
\(lqr\(rq for
-.IR \%@g@refer ,
+.IR @g@refer ,
and
\(lqt\(rq for
-.IR \%@g@tbl .
+.IR @g@tbl .
.
Modern implementations of the
.I man
@@ -3462,7 +3462,7 @@ _endif()dnl
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:an\:.tmac
+.I @MACRODIR@/\:an\:.tmac
Most
.I man
macros are contained in this file.
@@ -3473,7 +3473,7 @@ It also loads the extensions from
.
.
.TP
-.I \%@MACRODIR@/\:\%andoc\:.tmac
+.I @MACRODIR@/\:\%andoc\:.tmac
This brief
.I groff
program detects whether the
@@ -3506,7 +3506,7 @@ reloads each macro package as necessary.
.
.
.TP
-.I \%@MACRODIR@/\:\%an\-ext\:.tmac
+.I @MACRODIR@/\:\%an\-ext\:.tmac
Definitions of macros described above as extensions
.RB ( .SY ,
.BR .YS ,
@@ -3559,19 +3559,19 @@ implementations that may give up their scan for
indexing material early.
.
.
.TP
-.I \%@MACRODIR@/\:man\:.tmac
+.I @MACRODIR@/\:man\:.tmac
This is a wrapper that loads
.IR an.tmac .
.
.
.TP
-.I \%@MACRODIR@/\:\%mandoc\:.tmac
+.I @MACRODIR@/\:\%mandoc\:.tmac
This is a wrapper that loads
.IR \%andoc.tmac .
.
.
.TP
-.I \%@LOCALMACRODIR@/\:\%man\:\%.local
+.I @LOCALMACRODIR@/\:\%man\:\%.local
Put site-local changes and customizations into this file.
_ifstyle()dnl
.
diff --git a/tmac/groff_ms.7.man b/tmac/groff_ms.7.man
index 108f980d..6ad24abb 100644
--- a/tmac/groff_ms.7.man
+++ b/tmac/groff_ms.7.man
@@ -1356,20 +1356,20 @@ Changes to either register take effect at the next
display boundary.
The
.I ms
package is often used with the
-.IR \%@g@tbl ,
-.IR \%@g@pic ,
-.IR \%@g@eqn ,
+.IR @g@tbl ,
+.IR @g@pic ,
+.IR @g@eqn ,
and
-.I \%@g@refer
+.I @g@refer
preprocessors.
.
The
.B \[rs]n[DD]
distance is also applied to regions of the document preprocessed with
-.IR \%@g@eqn ,
-.IR \%@g@pic ,
+.IR @g@eqn ,
+.IR @g@pic ,
and
-.IR \%@g@tbl .
+.IR @g@tbl .
.
Mark text meant for preprocessors by enclosing it in pairs of tokens as
follows,
@@ -1450,7 +1450,7 @@ its bibliographic database.
.
.P
When
-.I \%@g@refer
+.I @g@refer
emits collected references
(as might be done on a \[lq]Works Cited\[rq] page),
it interpolates the string
@@ -2562,7 +2562,7 @@ Names containing only uppercase letters and digits.
.\" ====================================================================
.
.TP
-.I \%@MACRODIR@/\:@TMAC_S_PREFIX@s\:.tmac
+.I @MACRODIR@/\:@TMAC_S_PREFIX@s\:.tmac
implements the package.
.
.
@@ -2575,7 +2575,7 @@ support for
.
.
.TP
-.I \%@MACRODIR@/\:ms\:.tmac
+.I @MACRODIR@/\:ms\:.tmac
is a wrapper enabling the package to be loaded with
.RB \[lq] "groff \-m ms" \[rq].
.
@@ -2606,9 +2606,9 @@ it may be compressed and/or available in additional
formats.
.
.
.TP
-.I \%@DOCDIR@/\:ms\:.ms
+.I @DOCDIR@/\:ms\:.ms
.TQ
-.I \%@DOCDIR@/\:ms\:.ps
+.I @DOCDIR@/\:ms\:.ps
\[lq]Using
.I groff
with the
@@ -2618,9 +2618,9 @@ Larry Kollar.
.
.
.TP
-.I \%@DOCDIR@/\:\%msboxes\:.ms
+.I @DOCDIR@/\:\%msboxes\:.ms
.TQ
-.I \%@DOCDIR@/\:\%msboxes\:.pdf
+.I @DOCDIR@/\:\%msboxes\:.pdf
\[lq]Using PDF boxes with
.I groff
and the
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [groff] 35/35: [man pages]: Fix markup nit.,
G. Branden Robinson <=