008-09-15 Felix Zielcke * util/update-grub_lib.in: Rename to ... * util/grub-mkconfig_lib.in: ... this. Update all users. * util/update-grub.in: Rename to ... * util/grub-mkconf.in: ... this. Update all users. Print generated config to stdout. (update_grub_dir): Rename to ... (grub_mkconf_dir): ... this. * conf/common.rmk (update-grub): Rename to ... (grub-mkconf): ... this. (update-grub_lib): Rename to ... (grub-mkconf_lib): ... this. (update-grub_SCRIPTS): Rename to ... (grub-mkconf_SCRIPTS): ... this. Update all users. (update-grub_DATA): Rename to ... (grub-mkconf_DATA): ... this. Index: Makefile.in =================================================================== --- Makefile.in (revision 1863) +++ Makefile.in (working copy) @@ -108,7 +108,7 @@ PKGLIB = $(pkglib_IMAGES) $(pkglib_MODUL $(pkglib_DATA) $(lib_DATA) PKGDATA = $(pkgdata_DATA) PROGRAMS = $(bin_UTILITIES) $(sbin_UTILITIES) -SCRIPTS = $(bin_SCRIPTS) $(sbin_SCRIPTS) $(update-grub_SCRIPTS) +SCRIPTS = $(bin_SCRIPTS) $(sbin_SCRIPTS) $(grub-mkconf_SCRIPTS) CLEANFILES = MOSTLYCLEANFILES = @@ -209,12 +209,12 @@ install-local: all $(HELP2MAN) --section=8 $(builddir)/$$file > $(DESTDIR)$(mandir)/man8/$$dest.8; \ done $(mkinstalldirs) $(DESTDIR)$(sysconfdir)/grub.d - @list='$(update-grub_SCRIPTS)'; for file in $$list; do \ + @list='$(grub-mkconf_SCRIPTS)'; for file in $$list; do \ if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \ dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \ $(INSTALL_SCRIPT) $$dir$$file $(DESTDIR)$(sysconfdir)/grub.d/$$dest; \ done - @list='$(update-grub_DATA)'; for file in $$list; do \ + @list='$(grub-mkconf_DATA)'; for file in $$list; do \ if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \ dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \ $(INSTALL_DATA) $$dir$$file $(DESTDIR)$(sysconfdir)/grub.d/$$dest; \ @@ -249,7 +249,7 @@ uninstall: dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \ rm -f $(DESTDIR)$(sbindir)/$$dest; \ done - @list='$(update-grub_SCRIPTS) $(update-grub_DATA)'; for file in $$list; do \ + @list='$(grub-mkconf_SCRIPTS) $(grub-mkconf_DATA)'; for file in $$list; do \ dest="`echo $$file | sed 's,.*/,,' | sed '$(transform)'`"; \ rm -f $(DESTDIR)$(sysconfdir)/grub.d/$$dest; \ done Index: conf/common.rmk =================================================================== --- conf/common.rmk (revision 1863) +++ conf/common.rmk (working copy) @@ -115,30 +115,30 @@ endif grub_pe2elf_SOURCES = util/grub-pe2elf.c util/misc.c CLEANFILES += grub-pe2elf -# For update-grub -update-grub: util/update-grub.in config.status +# For grub-mkconf +grub-mkconf: util/grub-mkconf.in config.status ./config.status --file=$@:$< chmod +x $@ -sbin_SCRIPTS += update-grub -CLEANFILES += update-grub +sbin_SCRIPTS += grub-mkconf +CLEANFILES += grub-mkconf -update-grub_lib: util/update-grub_lib.in config.status +grub-mkconf_lib: util/grub-mkconf_lib.in config.status ./config.status --file=$@:$< chmod +x $@ -lib_DATA += update-grub_lib -CLEANFILES += update-grub_lib +lib_DATA += grub-mkconf_lib +CLEANFILES += grub-mkconf_lib %: util/grub.d/%.in config.status ./config.status --file=$@:$< chmod +x $@ -update-grub_SCRIPTS = 00_header 10_linux 10_hurd 30_os-prober 40_custom +grub-mkconf_SCRIPTS = 00_header 10_linux 10_hurd 30_os-prober 40_custom ifeq ($(target_os), cygwin) -update-grub_SCRIPTS += 10_windows +grub-mkconf_SCRIPTS += 10_windows endif -CLEANFILES += $(update-grub_SCRIPTS) +CLEANFILES += $(grub-mkconf_SCRIPTS) -update-grub_DATA += util/grub.d/README +grub-mkconf_DATA += util/grub.d/README # Filing systems. Index: util/grub-mkconf.in =================================================================== --- util/grub-mkconf.in (revision 1863) +++ util/grub-mkconf.in (working copy) @@ -25,7 +25,7 @@ address@hidden@ address@hidden@ grub_prefix=`echo /boot/grub | sed ${transform}` grub_cfg=${grub_prefix}/grub.cfg -update_grub_dir=${sysconfdir}/grub.d +grub_mkconf_dir=${sysconfdir}/grub.d grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}` grub_probe=${sbindir}/`echo grub-probe | sed ${transform}` @@ -165,14 +165,7 @@ export GRUB_DEVICE GRUB_DEVICE_UUID GRUB # These are optional, user-defined variables. export GRUB_DEFAULT GRUB_TIMEOUT GRUB_DISTRIBUTOR GRUB_CMDLINE_LINUX GRUB_CMDLINE_LINUX_DEFAULT GRUB_TERMINAL GRUB_SERIAL_COMMAND GRUB_DISABLE_LINUX_UUID GRUB_GFXMODE -rm -f ${grub_cfg}.new -exec > ${grub_cfg}.new - -# Allow this to fail, since /boot/grub/ might need to be fatfs to support some -# firmware implementations (e.g. OFW or EFI). -chmod 444 ${grub_cfg}.new || true - -echo "Updating ${grub_cfg} ..." >&2 +echo "Generating grub.cfg ..." >&2 cat << EOF # @@ -183,7 +176,7 @@ cat << EOF # EOF -for i in ${update_grub_dir}/* ; do +for i in ${grub_mkconf_dir}/* ; do case "$i" in # emacsen backup files. FIXME: support other editors *~) ;; @@ -198,7 +191,4 @@ for i in ${update_grub_dir}/* ; do esac done -# none of the children aborted with error, install the new grub.cfg -mv -f ${grub_cfg}.new ${grub_cfg} - echo "done" >&2 Property changes on: util/grub-mkconf.in ___________________________________________________________________ Added: svn:mergeinfo Index: util/update-grub.in =================================================================== --- util/update-grub.in (revision 1863) +++ util/update-grub.in (working copy) @@ -1,204 +0,0 @@ -#! /bin/sh -e - -# Generate grub.cfg by inspecting /boot contents. -# Copyright (C) 2006,2007,2008 Free Software Foundation, Inc. -# -# GRUB is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# GRUB is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GRUB. If not, see . - -transform="@program_transform_name@" - address@hidden@ address@hidden@ address@hidden@ address@hidden@ address@hidden@ -grub_prefix=`echo /boot/grub | sed ${transform}` -grub_cfg=${grub_prefix}/grub.cfg -update_grub_dir=${sysconfdir}/grub.d - -grub_mkdevicemap=${sbindir}/`echo grub-mkdevicemap | sed ${transform}` -grub_probe=${sbindir}/`echo grub-probe | sed ${transform}` - -# Usage: usage -# Print the usage. -usage () { - cat <. -EOF -} - -# Check the arguments. -for option in "$@"; do - case "$option" in - -h | --help) - usage - exit 0 ;; - -v | --version) - echo "$0 (GNU GRUB ${PACKAGE_VERSION})" - exit 0 ;; - -y) - echo "$0: warning: Ignoring -y option (no longer needed)." >&2 - ;; - -*) - echo "Unrecognized option \`$option'" 1>&2 - usage - exit 1 - ;; - esac -done - -. ${libdir}/grub/update-grub_lib - -if [ "x$EUID" = "x" ] ; then - EUID=`id -u` -fi - -if [ "$EUID" != 0 ] ; then - root=f - case "`uname 2>/dev/null`" in - CYGWIN*) - # Cygwin: Assume root if member of admin group - for g in `id -G 2>/dev/null` ; do - case $g in - 0|544) root=t ;; - esac - done ;; - esac - if [ $root != t ] ; then - echo "$0: You must run this as root" >&2 - exit 1 - fi -fi - -set $grub_mkdevicemap dummy -if test -f "$1"; then - : -else - echo "$1: Not found." 1>&2 - exit 1 -fi - -set $grub_probe dummy -if test -f "$1"; then - : -else - echo "$1: Not found." 1>&2 - exit 1 -fi - -mkdir -p ${grub_prefix} - -if test -e ${grub_prefix}/device.map ; then : ; else - grub-mkdevicemap -fi - -# Device containing our userland. Typically used for root= parameter. -GRUB_DEVICE="`${grub_probe} --target=device /`" -GRUB_DEVICE_UUID="`${grub_probe} --device ${GRUB_DEVICE} --target=fs_uuid 2> /dev/null`" || true - -# Device containing our /boot partition. Usually the same as GRUB_DEVICE. -GRUB_DEVICE_BOOT="`${grub_probe} --target=device /boot`" -GRUB_DEVICE_BOOT_UUID="`${grub_probe} --device ${GRUB_DEVICE_BOOT} --target=fs_uuid 2> /dev/null`" || true - -# Filesystem for the device containing our userland. Used for stuff like -# choosing Hurd filesystem module. -GRUB_FS="`${grub_probe} --target=fs / 2> /dev/null || echo unknown`" - -if test -f ${sysconfdir}/default/grub ; then - . ${sysconfdir}/default/grub -fi - -case x${GRUB_TERMINAL} in - x) - # If this platform supports gfxterm, try to use it. - if test -e ${grub_prefix}/gfxterm.mod ; then - GRUB_TERMINAL=gfxterm - fi - ;; - xconsole | xserial | xofconsole | xgfxterm) ;; - *) echo "Invalid terminal \"${GRUB_TERMINAL}\"" >&2 ; exit 1 ;; -esac - -# check for terminals that require fonts -case ${GRUB_TERMINAL} in - gfxterm) - if path=`font_path` ; then - GRUB_FONT_PATH="${path}" - else - # fallback to the native terminal for this platform - unset GRUB_TERMINAL - fi - ;; -esac - -# does our terminal support utf-8 ? -case ${GRUB_TERMINAL} in - gfxterm) ;; - *) - # make sure all our children behave in conformance with ascii.. - export LANG=C - ;; -esac - -# These are defined in this script, export them here so that user can -# override them. -export GRUB_DEVICE GRUB_DEVICE_UUID GRUB_DEVICE_BOOT GRUB_DEVICE_BOOT_UUID GRUB_FS GRUB_FONT_PATH GRUB_PRELOAD_MODULES - -# These are optional, user-defined variables. -export GRUB_DEFAULT GRUB_TIMEOUT GRUB_DISTRIBUTOR GRUB_CMDLINE_LINUX GRUB_CMDLINE_LINUX_DEFAULT GRUB_TERMINAL GRUB_SERIAL_COMMAND GRUB_DISABLE_LINUX_UUID GRUB_GFXMODE - -rm -f ${grub_cfg}.new -exec > ${grub_cfg}.new - -# Allow this to fail, since /boot/grub/ might need to be fatfs to support some -# firmware implementations (e.g. OFW or EFI). -chmod 444 ${grub_cfg}.new || true - -echo "Updating ${grub_cfg} ..." >&2 - -cat << EOF -# -# DO NOT EDIT THIS FILE -# -# It is automatically generated by $0 using templates -# from ${update_grub_dir} and settings from ${sysconfdir}/default/grub -# -EOF - -for i in ${update_grub_dir}/* ; do - case "$i" in - # emacsen backup files. FIXME: support other editors - *~) ;; - *) - if grub_file_is_not_garbage "$i" && test -x "$i" ; then - echo - echo "### BEGIN $i ###" - "$i" - echo "### END $i ###" - fi - ;; - esac -done - -# none of the children aborted with error, install the new grub.cfg -mv -f ${grub_cfg}.new ${grub_cfg} - -echo "done" >&2 Index: util/grub-mkconf_lib.in =================================================================== --- util/grub-mkconf_lib.in (revision 1863) +++ util/grub-mkconf_lib.in (working copy) @@ -1,4 +1,4 @@ -# Helper library for update-grub +# Helper library for grub-mkconf # Copyright (C) 2007,2008 Free Software Foundation, Inc. # # GRUB is free software: you can redistribute it and/or modify Property changes on: util/grub-mkconf_lib.in ___________________________________________________________________ Added: svn:mergeinfo Index: util/update-grub_lib.in =================================================================== --- util/update-grub_lib.in (revision 1863) +++ util/update-grub_lib.in (working copy) @@ -1,173 +0,0 @@ -# Helper library for update-grub -# Copyright (C) 2007,2008 Free Software Foundation, Inc. -# -# GRUB is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# GRUB is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GRUB. If not, see . - -transform="@program_transform_name@" - address@hidden@ address@hidden@ address@hidden@ address@hidden@ address@hidden@ -pkgdatadir=${datadir}/`echo @PACKAGE_TARNAME@ | sed "${transform}"` - -grub_probe=${sbindir}/`echo grub-probe | sed ${transform}` - -make_system_path_relative_to_its_root () -{ - path=$1 - # abort if file doesn't exist - if test -e $path ; then : ;else - return 1 - fi - - # canonicalize - if path=`readlink -f $path` ; then : ; else - return 1 - fi - - # if not a directory, climb up to the directory containing it - if test -d $path ; then - dir=$path - else - dir=`echo $path | sed -e "s,/[^/]*$,,g"` - fi - - num=`stat -c %d $dir` - - # this loop sets $dir to the root directory of the filesystem we're inspecting - while : ; do - parent=`readlink -f $dir/..` - if [ "x`stat -c %d $parent`" = "x$num" ] ; then : ; else - # $parent is another filesystem; we found it. - break - fi - if [ "x$dir" = "x/" ] ; then - # / is our root. - break - fi - dir=$parent - done - - # This function never prints trailing slashes (so that its output can be - # appended a slash unconditionally). Each slash in $dir is considered a - # preceding slash, and therefore the root directory is an empty string. - if [ "$dir" = "/" ] ; then - dir="" - fi - - # XXX: This fails if $dir contains ','. - path=`echo "$path" | sed -e "s,^$dir,,g"` || return 1 - - case "`uname 2>/dev/null`" in - CYGWIN*) - # Cygwin: Check if regular or emulated mount. - if [ -z "$dir" ] || [ "`stat -c %D "$dir/.."`" != 620000 ] ; then - # Reached some mount point not below /cygdrive. - # GRUB does not know Cygwin's emulated mounts, - # convert to Win32 path and remove drive letter. - path=`cygpath -m "$path" | sed -n 's,^[A-Za-z]:,,p'` - test ! -z "$path" || return 1 - fi ;; - esac - - echo "$path" -} - -is_path_readable_by_grub () -{ - path=$1 - - # abort if path doesn't exist - if test -e $path ; then : ;else - return 1 - fi - - # abort if file is in a filesystem we can't read - if ${grub_probe} -t fs $path > /dev/null 2>&1 ; then : ; else - return 1 - fi - - return 0 -} - -convert_system_path_to_grub_path () -{ - path=$1 - - echo "Warning: convert_system_path_to_grub_path() is deprecated. Use prepare_grub_to_access_device() instead." >&2 - - # abort if GRUB can't access the path - if is_path_readable_by_grub ${path} ; then : ; else - return 1 - fi - - if drive=`${grub_probe} -t drive $path` ; then : ; else - return 1 - fi - - if relative_path=`make_system_path_relative_to_its_root $path` ; then : ; else - return 1 - fi - - echo ${drive}${relative_path} -} - -prepare_grub_to_access_device () -{ - device=$1 - - # Abstraction modules aren't auto-loaded. - abstraction="`${grub_probe} --device ${device} --target=abstraction`" - if [ "x${abstraction}" = "x" ] ; then : ; else - echo "insmod ${abstraction}" - fi - - # If there's a filesystem UUID that GRUB is capable of identifying, use it; - # otherwise set root as per value in device.map. - echo "set root=`${grub_probe} --device ${device} --target=drive`" - if fs_uuid="`${grub_probe} --device ${device} --target=fs_uuid 2> /dev/null`" ; then - echo "search --fs-uuid --set ${fs_uuid}" - fi -} - -font_path () -{ - for dir in ${pkgdatadir} /boot/grub /usr/share/grub ; do - # FIXME: We prefer ascii because loading complete fonts is too slow (and - # we don't yet provide the gettext magic that would make unicode useful). - for basename in ascii unicode unifont ; do - path="${dir}/${basename}.pff" - if is_path_readable_by_grub ${path} > /dev/null ; then - echo "${path}" - return 0 - fi - done - done - - return 1 -} - -grub_file_is_not_garbage () -{ - if test -f "$1" ; then - case "$1" in - *.dpkg-dist|*.dpkg-old|*.dpkg-tmp) return 1 ;; # debian dpkg - esac - else - return 1 - fi - return 0 -}