[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: glibc-2.33 fails to build on POWER9
From: |
Thiago Jung Bauermann |
Subject: |
Re: glibc-2.33 fails to build on POWER9 |
Date: |
Fri, 15 Jul 2022 13:04:41 -0300 |
Hello Tobias,
Tobias Platen <guix@platen-software.de> writes:
> I tried to build glibc-2.33 on my Talos II (no cross compile here),
> it fails because the compiler is likely outdated.
>
> checking if the target machine is at least POWER8... yes
> checking if the compiler supports -mno-gnu-attribute... yes
> checking if gcc compiles signbit with 128-bit floating point type...
> yes
> checking if gcc compiles with -mabi=ieeelongdouble and -mlong-double-
> 128... no
> checking for objcopy... objcopy
> checking version of objcopy... 2.37, ok
> configure: error: *** The compiler must support -mabi=ieeelongdouble
> and -mlongdouble simultaneously.
>
> guix --version shows
> guix (GNU Guix) 7c9ad54b0616112c7eea6dd02379616aef206490
> Copyright (C) 2022 the Guix authors
This commit is 5 months old. Have you tried a recent one? Though I don't
think the age of the commit is at issue here since I don't see the
problem on the guixp9 POWER9 KVM guest — neither with that commit nor
with one from yesterday:
--8<---------------cut here---------------start------------->8---
guixp9: guix time-machine --commit=7c9ad54b0616112c7eea6dd02379616aef206490 --
build --check glibc
The following derivations will be built:
/gnu/store/cg43qhijpkhlw9bbl8fzwxvxw5grakia-glibc-2.33.drv
/gnu/store/zab1v46cb0yl9ci7hmzja1aicdlv3izn-python-minimal-3.9.9.drv
/gnu/store/0zvyvz8r0h0bz3mn9n48zqxc4yiwsyiw-Python-3.9.9.tar.xz.drv
/gnu/store/94yfrx7z6k8b7skwmbs7z123lzf9rpv3-Python-3.9.9.tar.xz.drv
/gnu/store/zrad6w94ryw22hr39y0gvpkhcgrj47q0-glibc-2.33.tar.xz.drv
/gnu/store/ryk073aag63hdspb12aa6s23h372w3s3-glibc-2.33.tar.xz.drv
⋮
[lots of output]
⋮
phase `compress-documentation' succeeded after 1.0 seconds
successfully built /gnu/store/cg43qhijpkhlw9bbl8fzwxvxw5grakia-glibc-2.33.drv
successfully built /gnu/store/cg43qhijpkhlw9bbl8fzwxvxw5grakia-glibc-2.33.drv
successfully built /gnu/store/cg43qhijpkhlw9bbl8fzwxvxw5grakia-glibc-2.33.drv
successfully built /gnu/store/cg43qhijpkhlw9bbl8fzwxvxw5grakia-glibc-2.33.drv
/gnu/store/qgy2di20daf79dmm9hhr04f98m455qcr-glibc-2.33-debug
/gnu/store/86wp800dw0ad0g74zbm1hc9kfhwvpjmd-glibc-2.33
/gnu/store/dwfcbnw0xw655pxfnm4sw8iy9migk0yw-glibc-2.33-static
guixp9: guix build --check glibc
The following derivation will be built:
/gnu/store/60cs3rx5jax7ls11cv7ypx8czhrn4372-glibc-2.33.drv
building /gnu/store/60cs3rx5jax7ls11cv7ypx8czhrn4372-glibc-2.33.drv...
⋮
[lots of output]
⋮
phase `compress-documentation' succeeded after 0.8 seconds
successfully built /gnu/store/60cs3rx5jax7ls11cv7ypx8czhrn4372-glibc-2.33.drv
successfully built /gnu/store/60cs3rx5jax7ls11cv7ypx8czhrn4372-glibc-2.33.drv
successfully built /gnu/store/60cs3rx5jax7ls11cv7ypx8czhrn4372-glibc-2.33.drv
successfully built /gnu/store/60cs3rx5jax7ls11cv7ypx8czhrn4372-glibc-2.33.drv
/gnu/store/fn8p0craaydg7iis4xla5ab6pscjjl20-glibc-2.33-debug
/gnu/store/16pvidj4ikzxqwqkggnjfq7wyflkk0x0-glibc-2.33
/gnu/store/dvnpnrbxj2l8i94y3cyh3rx6xxhx4bhh-glibc-2.33-static
guixp9: guix describe
Generation 27 Jul 15 2022 01:56:51 (current)
guix 9238ba5
repository URL: https://git.savannah.gnu.org/git/guix.git
branch: master
commit: 9238ba58748d99970674e098c9b1b0ed8ca66c14
guixp9:
--8<---------------cut here---------------end--------------->8---
The last glibc build on the master branch also went well in the CI
(which also uses guixp9 so not really a different data point):
https://ci.guix.gnu.org/build/935110/details
Can you share more details that might be relevant about your environment
and how you are building the package?
--
Thanks
Thiago