[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bug#27661] ISO-9660 image working and ready
From: |
Danny Milosavljevic |
Subject: |
[bug#27661] ISO-9660 image working and ready |
Date: |
Fri, 14 Jul 2017 09:55:21 +0200 |
Debugging:
$ qemu-system-x86_64 -bios $(guix build ovmf)/share/firmware/ovmf_x64.bin -m 1G
-enable-kvm -hda Zuefi -serial stdio
Then add "console=ttyS0" to Linux cmdline in grub menu edit.
I get:
[ 0.923605] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.926558] sd 0:0:0:0: [sda] 2215580 512-byte logical blocks: (1.13 GB/1.06
GiB)
[ 0.928683] sd 0:0:0:0: [sda] Write Protect is off
[ 0.930155] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.931705] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.934772] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+
PQ: 0 ANSI: 5
[ 0.949039] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 0.952674] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.955449] sda: sda1 sda2 sda3 sda4
[ 0.956995] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.959031] sr 1:0:0:0: Attached scsi generic sg1 type 5
GC Warning: Couldn't read /proc/stat
Welcome, this is GNU's early boot Guile.
Use '--repl' for an initrd REPL.
loading '/gnu/store/48d1w55iy2vpcm5ass5lsp8almghszv8-system/boot'...
[ 1.235733] attempt to access beyond end of device
[ 1.237066] sda1: rw=0, want=949216, limit=76376
[ 1.238565] attempt to access beyond end of device
[ 1.240115] sda1: rw=0, want=949216, limit=76376
[ 1.242095] attempt to access beyond end of device
[ 1.243545] sda1: rw=0, want=949216, limit=76376
ERROR: In procedure primitive-load:
ERROR: In procedure fport_fill_input: Input/output error
Partitions are:
Disk Zuefi: 1.1 GiB, 1134376960 bytes, 2215580 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: DB26D0AA-65F4-4CE1-87F8-85CAD51B5C94
Device Start End Sectors Size Type
Zuefi1 64 76439 76376 37.3M Microsoft basic data <----- here is a
suspect
Zuefi2 76440 82199 5760 2.8M EFI System
Zuefi3 82200 2214931 2132732 1G Apple HFS/HFS+
Zuefi4 2214932 2215531 600 300K Microsoft basic data
Backtrace:
Impossible. It did not actually enter the prompt.
- [bug#27661] ISO-9660 image working and ready, (continued)
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/12
- [bug#27661] ISO-9660 image working and ready, ng0, 2017/07/12
- [bug#27661] ISO-9660 image working and ready, Marius Bakke, 2017/07/13
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/14
- [bug#27661] ISO-9660 image working and ready, Ludovic Courtès, 2017/07/17
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/17
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/17
- [bug#27661] ISO-9660 image working and ready, Ludovic Courtès, 2017/07/18
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/18
- [bug#27661] ISO-9660 image working and ready, Ludovic Courtès, 2017/07/18
- [bug#27661] ISO-9660 image working and ready,
Danny Milosavljevic <=
- [bug#27661] ISO-9660 image working and ready, Ludovic Courtès, 2017/07/17
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/17
- [bug#27661] ISO-9660 image working and ready, Danny Milosavljevic, 2017/07/20