[bug#63943] The Shepherd on GNU/Hurd

[Janneke Nieuwenhuizen]

Ludovic Courtès writes:

> Ludovic Courtès <ludo@gnu.org> skribis:
>
>> To me it’s important so we can upgrade the Shepherd in use on GNU/Hurd
>> (it’s still stuck at 0.8 because so far Fibers lacked support for
>> non-Linux systems), which in turn means we can use the newer Shepherd
>> APIs in its config file.  Unfortunately, while shepherd cross-builds
>> and runs on GNU/Hurd, I’m not confident it “works”.  I’ll write more
>> in a separate message.
>
> The patch I ended up not including in this series is use of current
> Shepherd on GNU/Hurd (attached).
>
> Problems that I see are:
>
>   • ‘networking’ gets stuck in ‘starting’ state.  My guess is that it
>     uses ‘system*’ (the replacement provided by shepherd) and that one
>     does not return because we never get SIGCHLD.
>
>   • (@ (ice-9 threads) all-threads) says there are two threads.  That
>     was already the case with 0.8, but it’s no good.
>
> Also, I haven’t tried to run the Shepherd’s test suite natively on
> GNU/Hurd; I’m sure it’d uncover problems.
>
> Overall, I’m pessimistic about signal handling without ‘signalfd’.  We
> could try to get shepherd to kinda work without ‘signalfd’ (we could
> even test that code path on GNU/Linux), but that’s going to be brittle
> as we can already see.
>
> What d’ya think, comrades?

It would be great, if it works ;-)

While I'd like to test it and I'm still making progress building
natively on the Hurd but it's hard to predict when I'll get to building
fibers:

--8<---------------cut here---------------start------------->8---
root@guixydevel ~/src/guix/wip-hurd# ./pre-inst-env guix build 
guile-fibers@1.3.1
The following derivations will be built:
  /gnu/store/rc75bjs5pjni9w6dvhjvmik55vgdk501-guile-fibers-1.3.1.drv
  /gnu/store/l9pvk6ari19l5j8bvbjij4df8rx8a943-guile-fibers-1.3.1-checkout.drv
  /gnu/store/79j9l6rxqpayvrh2fmk665xiw6izfd9v-guile-fibers-1.3.1-checkout.drv
  /gnu/store/71lgpvpmgjb40n6r5qkrk7zp5cgmc67x-guile-json-4.7.3.drv
  /gnu/store/b8wcy6aw9zsd3s7rjp6idmzzh0slp9xn-module-import-compiled.drv
  /gnu/store/kkgkbhg583zplxd75kivl3s06xp3id7i-guile-gnutls-3.7.12.drv
  /gnu/store/2nnnqgifm6kwwaard67vmlxsqg9z4dbn-guile-gnutls-3.7.12.tar.xz.drv
  /gnu/store/lxhq4z01ihalnbxp592z4mm9iyjbvb3p-texinfo-6.8.drv
  /gnu/store/78nfa0r179gs408gxf50i0q0c2cd3mi7-texinfo-6.8.tar.xz.drv
  /gnu/store/p6hq43iga4kb4g09h2baq5mdca5m5h29-git-minimal-2.40.1.drv
  /gnu/store/7j5v82rv9ar36xxnh3sk5srw1dr48azn-curl-7.85.0.drv
  /gnu/store/74n0wvcc4c8qjdalf2mw77ij3my7amcc-nghttp2-1.49.0.drv
  /gnu/store/8z7cr0bgayis4qc97n72hia0qy2y7cx9-jansson-2.14.drv
  /gnu/store/cma9bgjc8a2wx4qfrzyxbzhwhyxpabdc-python-3.10.7.drv
  /gnu/store/00rah96n5lqi6ciz6xwnp1pxjh87sxak-sqlite-3.39.3.drv
  /gnu/store/6g1l3r6bz60rbpf589wldflgnv91aiql-sqlite-autoconf-3390300.tar.xz.drv
  /gnu/store/0mwhankh574hrcyjcbpiv4vzgz79fx3d-libxext-1.3.4.drv
  /gnu/store/agp5cags2viz3i03qpgwbrvsxwzq905j-tk-8.6.12.drv
  /gnu/store/479v3x0adq8i592v84b65zp4ssz9k3k6-libxft-2.3.4.drv
  /gnu/store/6zhyims30137hinkqki2fs1r7906nys6-fontconfig-minimal-2.14.0.drv
  /gnu/store/bfxx8cznlb4hszg1qm0limhyjsv7d7yr-font-dejavu-2.37.drv
  /gnu/store/svnq4kdgyvh6zp8vb0swcnrkj039wwqy-module-import-compiled.drv
  /gnu/store/qvqxdab06klfn40bdf4fmmmflrgaah6q-tk8.6.12-src.tar.xz.drv
  /gnu/store/jzjsa7b6ly6a4wz4a9k0s66fnxv0imb0-libev-4.33.drv
  /gnu/store/bhxa1vsdx7qm2cdqwqr0j7k6zdvhnv6l-mit-krb5-1.20.drv
  /gnu/store/a552az04c0fwd1hs936gsq6ivszhiimd-krb5-1.20.tar.xz.drv
  /gnu/store/pg26yqmmv4fz2if4k6fd5hbnh5xnqy2r-libevent-2.1.12.drv
  /gnu/store/3861750mi7r1faq24va47dc6dqr122pj-python-wrapper-3.10.7.drv
--8<---------------cut here---------------end--------------->8---

most (all?) of these dependencies are on my list working towards
a self-hosting guix.

Greetings,
janneke

-- 
Janneke Nieuwenhuizen <janneke@gnu.org>  | GNU LilyPond https://LilyPond.org
Freelance IT https://www.JoyOfSource.com | Avatar® https://AvatarAcademy.com