installation problems

[Madhu Srinivasan]

hi,

I`m a cfengine newcomer, `m trying to install the software in a SunOs
5.6.
I executed the configure script, it gave me three general  warnings....

src/conf.h is unchanged
configure: warning:
=====================================================
configure: warning:
configure: warning:  * DFS users should use --enable-DCE
configure: warning:
configure: warning:  * If compiling on older pre-POSIX or NT systems
configure: warning:  you might need librx compatibility lib from GNU
configure: warning:
configure: warning:  * This version requires Berkeley db version 3
configure: warning:  in /usr/local/BerkeleyDB from www.sleepycat.com.
configure: warning:
configure: warning:
=====================================================
Configuration done. Run make/gmake to build cfengine.


i`m not sure , what the berkleyDB is. Can you please tell me more on
that.

The problem dose`nt end there, i got hold of a copy of berkley and tried

installing it, it started giving out it`s share of error messages.. i`ve
attached a copy
of it`s error messages, in a file named "berk". The message says
something about
CC not working fine.... so, i tried the following in the command
prompt..


i3sn02 $ cc -o test.c
/usr/ucb/cc:  language optional software package not installed
i3sn02 $
i3sn02 $
i3sn02 $ gcc -o test.c
gcc: No input files

i could`nt figure out much though. the path to the LD_LIBRARY is also
set...
i`ve attached a copy of my .profile too.

Thanks so much,

Madhu

loading cache ./config.cache
checking host system type... sparc-sun-solaris2.6
checking target system type... sparc-sun-solaris2.6
checking build system type... sparc-sun-solaris2.6
checking for a BSD compatible install... ./install-sh -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking for gcc... (cached) gcc
checking whether the C compiler (gcc   -L/usr/local/lib) works... yes
checking whether the C compiler (gcc   -L/usr/local/lib) is a cross-compiler... 
no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking how to run the C preprocessor... (cached) gcc -E
checking for flex... (cached) lex
checking for flex... (cached) lex
checking for yywrap in -ll... (cached) yes
checking lex output file root... (cached) lex.yy
checking whether yytext is a pointer... (cached) no
checking for bison... no
checking for byacc... no
checking for ranlib... (cached) ranlib
checking for a BSD compatible install... ./install-sh -c
checking for latex... (cached) false
checking for texi2dvi... (cached) false
checking for dvips... (cached) false
checking for makeinfo... (cached) /c1disk1p0/ssicvs/cfengine-2.0.a6/missing 
makeinfo
checking for main in -lm... (cached) yes
checking for door_create... (cached) no
checking for setsockopt... (cached) no
checking for setsockopt in -lsocket... (cached) yes
checking for gethostent... (cached) no
checking for gethostent in -lnsl... (cached) yes
checking for yp_get_default_domain... (cached) yes
checking for db_create in -ldb... (cached) no
checking for main in -lrx... (cached) no
checking for main in -lcrypto... (cached) no
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for sys/mount.h... (cached) yes
checking for utime.h... (cached) yes
checking for time.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for malloc.h... (cached) yes
checking for vfs.h... (cached) no
checking for sys/vfs.h... (cached) no
checking for sys/sockio.h... (cached) yes
checking for sys/statvfs.h... (cached) yes
checking for sys/statfs.h... (cached) yes
checking for sys/param.h... (cached) no
checking for fcntl.h... (cached) yes
checking for sys/filesys.h... (cached) no
checking for dustat.h... (cached) no
checking for tcpd.h... (cached) no
checking for db.h... (cached) no
checking for regex.h... (cached) yes
checking for rxposix.h... (cached) no
checking for sys/systeminfo.h... (cached) yes
checking for sys/acl.h... (cached) yes
checking for openssl/des.h... (cached) no
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
checking for dirent.h that defines DIR... (cached) yes
checking for opendir in -ldir... (cached) no
checking for mode_t... (cached) yes
checking for size_t... (cached) yes
checking for uid_t in sys/types.h... (cached) yes
checking for pid_t... (cached) yes
checking for working const... (cached) yes
checking for getcwd... (cached) yes
checking for getnetgrent... (cached) yes
checking for waitpid... (cached) yes
checking for seteuid... (cached) yes
checking for setegid... (cached) yes
checking for setreuid... (cached) yes
checking for setregid... (cached) yes
checking for uname... (cached) yes
checking for gethostname... (cached) yes
checking for realpath... (cached) yes
checking for regcomp... (cached) yes
checking for chflags... (cached) no
checking for strstr... (cached) yes
checking for putenv... (cached) yes
checking for drand48... (cached) yes
checking for srand48... (cached) yes
checking for bcopy... (cached) yes
checking for mkfifo... (cached) yes
checking for statfs... (cached) yes
checking for statvfs... (cached) yes
checking for sysinfo... (cached) yes
checking for setsid... (cached) yes
checking for strdup... (cached) yes
checking for strrchr... (cached) yes
checking for strerror... (cached) yes
checking for either struct rtentry or struct ortentry... rtentry
checking for main in -lpthread... (cached) yes
checking for pthread.h... (cached) yes
checking for sched.h... (cached) yes
checking for lchown... (cached) yes
checking for pthread_attr_setstacksize... (cached) yes
checking for pthread_sigmask... (cached) yes
checking 8-bit support in Flex... no 8-bit support
checking for hostname... (cached) /usr/bin/hostname
creating ./config.status
creating pub/Makefile
creating doc/Makefile
creating src/Makefile
creating bin/Makefile
creating contrib/Makefile
creating inputs/Makefile
creating Makefile
creating doc/cfengine.8
creating bin/cfdaily
creating src/cflex.l
creating contrib/cfcron
creating contrib/vicf
creating src/conf.h
src/conf.h is unchanged
Configuration done. Run make/gmake to build cfengine.

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:578: checking host system type
configure:599: checking target system type
configure:617: checking build system type
configure:653: checking for a BSD compatible install
configure:706: checking whether build environment is sane
configure:763: checking whether make sets ${MAKE}
configure:809: checking for working aclocal
configure:822: checking for working autoconf
configure:835: checking for working automake
configure:848: checking for working autoheader
configure:861: checking for working makeinfo
configure:911: checking for gcc
configure:1024: checking whether the C compiler (gcc   -L/usr/local/lib) works
configure:1040: gcc -o conftest   -I/usr/local/include  -L/usr/local/lib 
conftest.c  1>&5
configure:1066: checking whether the C compiler (gcc   -L/usr/local/lib) is a 
cross-compiler
configure:1071: checking whether we are using GNU C
configure:1099: checking whether gcc accepts -g
configure:1132: checking how to run the C preprocessor
configure:1217: checking for flex
configure:1250: checking for flex
configure:1284: checking for yywrap in -ll
configure:1326: checking lex output file root
configure:1347: checking whether yytext is a pointer
configure:1393: checking for bison
configure:1393: checking for byacc
configure:1427: checking for ranlib
configure:1466: checking for a BSD compatible install
configure:1522: checking for latex
configure:1559: checking for texi2dvi
configure:1596: checking for dvips
configure:1633: checking for makeinfo
configure:1671: checking for main in -lm
configure:1714: checking for door_create
configure:1762: checking for setsockopt
configure:1808: checking for setsockopt in -lsocket
configure:1857: checking for gethostent
configure:1903: checking for gethostent in -lnsl
configure:1952: checking for yp_get_default_domain
configure:2047: checking for db_create in -ldb
configure:2094: checking for main in -lrx
configure:2136: checking for main in -lcrypto
configure:2185: checking for unistd.h
configure:2185: checking for stdlib.h
configure:2225: checking for sys/mount.h
configure:2265: checking for utime.h
configure:2305: checking for time.h
configure:2345: checking for sys/time.h
configure:2385: checking for malloc.h
configure:2425: checking for vfs.h
configure:2465: checking for sys/vfs.h
configure:2505: checking for sys/sockio.h
configure:2545: checking for sys/statvfs.h
configure:2585: checking for sys/statfs.h
configure:2625: checking for sys/param.h
configure:2665: checking for fcntl.h
configure:2705: checking for sys/filesys.h
configure:2745: checking for dustat.h
configure:2785: checking for tcpd.h
configure:2825: checking for db.h
configure:2825: checking for regex.h
configure:2825: checking for rxposix.h
configure:2865: checking for sys/systeminfo.h
configure:2905: checking for sys/acl.h
configure:2945: checking for openssl/des.h
configure:2983: checking for ANSI C header files
configure:3087: checking whether time.h and sys/time.h may both be included
configure:3122: checking for sys/wait.h that is POSIX.1 compatible
configure:3168: checking for dirent.h that defines DIR
configure:3206: checking for opendir in -ldir
configure:3292: checking for mode_t
configure:3325: checking for size_t
configure:3358: checking for uid_t in sys/types.h
configure:3392: checking for pid_t
configure:3428: checking for working const
configure:3507: checking for getcwd
configure:3507: checking for getnetgrent
configure:3507: checking for waitpid
configure:3507: checking for seteuid
configure:3507: checking for setegid
configure:3507: checking for setreuid
configure:3507: checking for setregid
configure:3562: checking for uname
configure:3562: checking for gethostname
configure:3562: checking for realpath
configure:3562: checking for regcomp
configure:3562: checking for chflags
configure:3617: checking for strstr
configure:3617: checking for putenv
configure:3617: checking for drand48
configure:3617: checking for srand48
configure:3672: checking for bcopy
configure:3672: checking for mkfifo
configure:3672: checking for statfs
configure:3672: checking for statvfs
configure:3727: checking for sysinfo
configure:3727: checking for setsid
configure:3727: checking for strdup
configure:3727: checking for strrchr
configure:3727: checking for strerror
configure:3783: checking for either struct rtentry or struct ortentry
configure:3818: checking for main in -lpthread
configure:3865: checking for pthread.h
configure:3905: checking for sched.h
configure:3944: checking for lchown
configure:3996: checking for pthread_attr_setstacksize
configure:4094: checking for pthread_sigmask
configure:4966: checking 8-bit support in Flex
configure:4987: checking for hostname

loading cache ./config.cache
checking for a BSD compatible install... ../dist/install-sh -c
checking host system type... sparc-sun-solaris2.6
checking if building in the top-level directory... no
checking if --disable-bigfile option specified... no
checking if --enable-compat185 option specified... no
checking if --enable-cxx option specified... no
checking if --enable-debug option specified... no
checking if --enable-debug_rop option specified... no
checking if --enable-debug_wop option specified... no
checking if --enable-diagnostic option specified... no
checking if --enable-dump185 option specified... no
checking if --enable-dynamic option specified... no
checking if --enable-java option specified... no
checking if --enable-posixmutexes option specified... no
checking if --enable-rpc option specified... no
checking if --enable-shared option specified... no
checking if --enable-tcl option specified... no
checking if --enable-test option specified... no
checking if --enable-uimutexes option specified... no
checking if --enable-umrw option specified... no
checking if --with-tcl option specified... no
checking for cc... cc
checking for gcc... (cached) cc
checking for gcc... (cached) cc
checking whether the C compiler (cc -O ) works... no

MAILCHECK=0
stty erase "^H" 
TERM=${TERM-vt100}; export TERM
PATH=/usr/bin:/usr/ccs/bin:/usr/ucb:/etc:/opt/bin:/usr/bin:/usr/ccs/bin:/usr/ucb:/etc:/opt/bin:/usr/local/bin:.
export PATH
ORACLE_TERM=vt100  export ORACLE_TERM
LD_LIBRARY_PATH=/usr/lib:/usr/openwin/lib:/usr/ucblib:$ORACLE_HOME/lib:.
export LD_LIBRARY_PATH ORACLE_SID
MENU5PATH=${ORACLE_HOME}/forms30/admin/resource
export MENU5PATH
ORATERMPATH=${ORACLE_HOME}/forms30/admin/resource
export ORATERMPATH
ORAENV_ASK=NO export ORAENV_ASK
MANPATH=/usr/share/man:/usr/openwin/man:$ORACLE_HOME/sqlplus/man export MANPATH
#. /opt/bin/oraenv
export TERM=vt100
PS1=`uname -n`" $ "
export PS1

Madhu.Srinivasan.vcf
Description: Card for Madhu Srinivasan