Re: copy happening despite my rules.

[Adams, Russell L.]

Try being very explicit.

copy:
        any.!damworker4ref3::

Also, does the incorrect logic happen in any other actions (files,
dirs, editfiles, links, etc)?

Russell

On Fri, Sep 30, 2005 at 10:42:30AM -0400, David Cress wrote:
> From cfagent -p -v
> 
> Defined Classes = ( 10_188_129 10_188_129_85 192_9_200 192_9_200_22
> 192_9_200_23 192_9_200_24 32_bit Day30 Friday Hr10 Hr10_Q3 Min40_45
> Min41 Q3 SUNW_Sun_Fire_V240 September Yr2005 any cfengine_2 cfengine_2_1
> cfengine_2_1_15 compiled_on_solaris2_9 dam damref damworker4ref3
> damworker4ref3_mp1 damworker4ref3_mp1_turner_com damworker4ref3_mp2
> damworker4ref3_mp2_turner_com damworker4ref3_san01
> damworker4ref3_san01_turner_com damworker4ref3_turner_com damworkerref
> ipv4_10 ipv4_10_188 ipv4_10_188_129 ipv4_10_188_129_85 ipv4_192
> ipv4_192_9 ipv4_192_9_200 ipv4_192_9_200_22 ipv4_192_9_200_23
> ipv4_192_9_200_24 net_iface_bge0 net_iface_bge2 net_iface_bge2_1
> net_iface_bge3 net_iface_lo0 solaris sparc sun4u sunos_5_9 sunos_sun4u
> sunos_sun4u_5_9 sunos_sun4u_5_9_Generic_117171_17 )
> 
> Adams, Russell L. wrote:
> > Could it be a problem with the length of the hostname? What classes
> > does cfagent -v show being defined initially?
> > 
> > Russell
> > 
> > On Fri, Sep 30, 2005 at 09:30:16AM -0400, David Cress wrote:
> > 
> >>Some more info.
> >>
> >>The machine I'm having problems on is damworker4ref3.  After changing
> >>cf.copy to:
> >>  copy:
> >>    !damworker4ref3::
> >>      /master/copy/samba/dam/smb.conf
> >>        dest=/opt/samba/lib/smb.conf
> >>        owner=root group=other mode=644
> >>        type=checksum inform=true
> >>        verify=true server=$(filehost)
> >>
> >>I re-ran cfagent on damworker4ref3, it still tries to install
> >>/opt/samba/lib/smb.conf
> >>
> >>   [BEGIN InstallPending File Imaging:
> >>IsInstallable(!damworker4ref3) - true
> >>
> >>This makes no sense.  I've stated, I want /opt/samba/lib/smb.conf
> >>installed on any machine but, damworker4ref3.  When I run it on
> >>samworker4ref3, it gets installed.  Argh!!!  I've tried to make the
> >>statements as simple as possible, but it still does not do what I want.
> >> Somehow I telling it to do the wrong thing and I just do not see it.
> >>
> >>I even did an 'od' of cf.copy to see if there were any non-printing
> >>characters in there.  Nothing.
> >>
> >>
> >>David Cress wrote:
> >>
> >>>Here is the relevant part of my config for cfengine v2.1.15:
> >>>
> >>>cf.groups:
> >>>  damworkerref = ( damworker4ref1 damworker4ref2 damworker4ref3 )
> >>>
> >>>cf.copy:
> >>>  damworkerref.!damworker4ref3::
> >>>     /master/copy/samba/dam/smb.conf
> >>>        dest=/opt/samba/lib/smb.conf
> >>>        owner=root group=other mode=644
> >>>        type=checksum inform=true
> >>>        verify=true server=$(filehost)
> >>>
> >>>
> >>>When I run this config on damworker4ref3, (cfagent -d1 -q -n) I get the
> >>>following:
> >>>
> >>>NEW CLASS PREDICATE:: damworkerref.!damworker4ref3::
> >>>   (No actions pending in File Imaging:)
> >>>InitializeAction()
> >>>HandleClass(damworkerref.!damworker4ref3)
> >>>   (No actions pending in File Imaging:)
> >>>Compound class = (damworkerref.!damworker4ref3) with 2 members
> >>>VAROBJ /master/copy/samba/dam/smb.conf
> >>>IsVarString(/master/copy/samba/dam/smb.conf) - syntax verify
> >>>Found 0 variables in (/master/copy/samba/dam/smb.conf)
> >>>Handling Object = (/master/copy/samba/dam/smb.conf)
> >>>
> >>>
> >>>It's reading everything in OK.
> >>>
> >>>
> >>>   [BEGIN InstallPending File Imaging:
> >>>IsInstallable(damworkerref.!damworker4ref3) - true
> >>>InstallImageItem (/master/copy/samba/dam/smb.conf) (+644)(-7133)
> >>>(/opt/samba/lib/smb.conf), server=sunman.turner.com
> >>>ExpandVarstring(/master/copy/samba/dam/smb.conf)
> >>>ExpandVarstring(sunman.turner.com)
> >>>SplitStringAsItemList(sunman.turner.com,:)
> >>>Build2DListFromVarstring(/master/copy/samba/dam/smb.conf,sep=/)
> >>>SplitVarstring(/master/copy/samba/dam/smb.conf,:=58)
> >>>IsVarString(/master/copy/samba/dam/smb.conf) - syntax verify
> >>>Found 0 variables in (/master/copy/samba/dam/smb.conf)
> >>>AppendTwoDimItem(itemlist, sep=/)
> >>>Set2DLIst()
> >>>Get2DListEnt()
> >>>Get2DLIstEnt returns /master/copy/samba/dam/smb.conf
> >>>IncrementTwoDimList()
> >>>
> >>>
> >>>This should be false, not true.  Why is the "!", not functioning?
> >>>
> >>>On another box called 'sunman', it sees that it's not part of the
> >>>damworkerref class, and drops out just fine.
> >>>
> >>>
> >>>   [BEGIN InstallPending File Imaging:
> >>>IsInstallable(damworkerref.!damworker4ref3) - false
> >>>Not installing copy item, no match
> >>>(/master/copy/samba/dam/smb.conf,damworkerref.!damworker4ref3)
> >>>InitializeAction()
> >>>   END InstallPending]
> >>>
> >>>
> >>>I've got to be missing something something basic, and I just can not see 
> >>>it.
> >>>
> >>
> >>-- 
> >>David Cress
> >>Lead Engineer
> >>CNN Internet Technologies
> >>http://www.cnn.com
> >>--------------------
> >>(404) 878-1921
> >>
> >>What exists, exists; what is, is.
> >>
> >>
> >>_______________________________________________
> >>Help-cfengine mailing list
> >>Help-cfengine@gnu.org
> >>http://lists.gnu.org/mailman/listinfo/help-cfengine
> > 
> > 
> > 
> > _______________________________________________
> > Help-cfengine mailing list
> > Help-cfengine@gnu.org
> > http://lists.gnu.org/mailman/listinfo/help-cfengine
> > 
> > 
> 
> -- 
> David Cress
> Lead Engineer
> CNN Internet Technologies
> http://www.cnn.com
> --------------------
> (404) 878-1921
> 
> What exists, exists; what is, is.