Re: no peer visible

[Schanzenbach, Martin]

Hi,

did you follow one of the installation guides?
As what user are you trying to start GNUnet?
Did you follow the instructions printed after you did './configure'?

My guess the issue is with one of the above.
Also check if any gnunet processes are currently running and kill them before 
you try again.

BR
Martin

> On 3. Feb 2020, at 16:11, Vikas Maurya <address@hidden> wrote:
> 
> 
> 
> ---------- Forwarded message ---------
> From: Vikas Maurya <address@hidden>
> Date: Mon, Feb 3, 2020 at 4:09 PM
> Subject: Re: no peer visible
> To: Schanzenbach, Martin <address@hidden>
> 
> 
> Hi, 
> This is common sequence of errors in the log file. I have also attached log 
> file for your reference. one more thing to mention when I run sudo ss -ntlp, 
> I see that gnunet-service is already listening on port 2086, even before 
> running gnunet-arm -s . Is this a common behaviour? because one of the error 
> in log file says port already in used 
> $ sudo ss -ntlp
> State           Recv-Q           Send-Q                      Local 
> Address:Port                      Peer Address:Port                           
>                                       
> LISTEN          0                5                                 
> 0.0.0.0:2086                           0.0.0.0:*               
> users:(("gnunet-service-",pid=2144,fd=12))           
> LISTEN          0                80                              
> 127.0.0.1:3306                           0.0.0.0:*               
> users:(("mysqld",pid=1783,fd=21))                    
> LISTEN          0                128                         127.0.0.53%lo:53 
>                             0.0.0.0:*               
> users:(("systemd-resolve",pid=891,fd=13))            
> LISTEN          0                5                               
> 127.0.0.1:631                            0.0.0.0:*               
> users:(("cupsd",pid=12959,fd=7))                     
> LISTEN          0                5                                    
> [::]:2086                              [::]:*               
> users:(("gnunet-service-",pid=2144,fd=11))           
> LISTEN          0                5                                   
> [::1]:631                               [::]:*               
> users:(("cupsd",pid=12959,fd=6))                     
> logfile output. 
> 
> <snip>
> 60 Feb 03 16:00:25-207988 revocation-22631 ERROR `mkdir' failed on file 
> `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at 
> service.c:1140 with error: Permission denied
>  61 Feb 03 16:00:25-208096 nse-22642 ERROR Could not bind to any of the ports 
> I was supposed to, refusing to run!
>  62 Feb 03 16:00:25-208239 util-service-22631 ERROR `bind' failed at 
> service.c:1405 with error: Permission denied
>  63 Feb 03 16:00:25-208281 revocation-22631 ERROR `bind' failed at 
> service.c:1558 with error: Success
>  64 Feb 03 16:00:25-208304 revocation-22631 ERROR Could not bind to any of 
> the ports I was supposed to, refusing to run!
>  65 Feb 03 16:00:25-208924 arm-22628 WARNING Service `nse' terminated with 
> status exit/255, will restart in 4 ms
>  66 Feb 03 16:00:25-209153 arm-22628 WARNING Service `revocation' terminated 
> with status exit/255, will restart in 1 ms
>  67 Feb 03 16:00:25-215409 gns-22632 ERROR `mkdir' failed on file 
> `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 with 
> error: Permission denied
>  68 Feb 03 16:00:25-215592 util-service-22632 ERROR `bind' failed at 
> service.c:1405 with error: Permission denied
>  69 Feb 03 16:00:25-215627 gns-22632 ERROR `bind' failed at service.c:1558 
> with error: Success
>  70 Feb 03 16:00:25-215648 gns-22632 ERROR Could not bind to any of the ports 
> I was supposed to, refusing to run!
>  71 Feb 03 16:00:25-216175 revocation-22643 ERROR `mkdir' failed on file 
> `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at 
> service.c:1140 with error: Permission denied
>  72 Feb 03 16:00:25-216303 util-service-22643 ERROR `bind' failed at 
> service.c:1405 with error: Permission denied
>  73 Feb 03 16:00:25-216337 revocation-22643 ERROR `bind' failed at 
> service.c:1558 with error: Success
>  74 Feb 03 16:00:25-216358 revocation-22643 ERROR Could not bind to any of 
> the ports I was supposed to, refusing to run!
>  75 Feb 03 16:00:25-216345 arm-22628 WARNING Service `gns' terminated with 
> status exit/255, will restart in 1 ms
>  76 Feb 03 16:00:25-216747 arm-22628 WARNING Service `revocation' terminated 
> with status exit/255, will restart in 2 ms
>  77 Feb 03 16:00:25-219790 nse-22644 ERROR `mkdir' failed on file 
> `/tmp/gnunet-system-runtime//gnunet-service-nse.sock' at service.c:1140 with 
> error: Permission denied
>  78 Feb 03 16:00:25-219925 util-service-22644 ERROR `bind' failed at 
> service.c:1405 with error: Permission denied
>  79 Feb 03 16:00:25-219951 nse-22644 ERROR `bind' failed at service.c:1558 
> with error: Success
>  80 Feb 03 16:00:25-219977 nse-22644 ERROR Could not bind to any of the ports 
> I was supposed to, refusing to run!
>  81 Feb 03 16:00:25-220458 arm-22628 WARNING Service `nse' terminated with 
> status exit/255, will restart in 8 ms
>  82 Feb 03 16:00:25-222676 gns-22645 ERROR `mkdir' failed on file 
> `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 with 
> error: Permission denied
>  83 Feb 03 16:00:25-222770 util-service-22645 ERROR `bind' failed at 
> service.c:1405 with error: Permission denied
>  84 Feb 03 16:00:25-222786 gns-22645 ERROR `bind' failed at service.c:1558 
> with error: Success
>  85 Feb 03 16:00:25-222795 gns-22645 ERROR Could not bind to any of the ports 
> I was supposed to, refusing to run!
>  86 Feb 03 16:00:25-222919 revocation-22646 ERROR `mkdir' failed on file 
> `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at 
> service.c:1140 with error: Permission denied
>  87 Feb 03 16:00:25-223009 util-service-22646 ERROR `bind' failed at 
> service.c:1405 with error: Permission denied
>  88 Feb 03 16:00:25-223025 revocation-22646 ERROR `bind' failed at 
> service.c:1558 with error: Success
> 
> <snip> 
> 
> On Sun, Feb 2, 2020 at 10:55 PM Schanzenbach, Martin <address@hidden> wrote:
> Hi,
> 
> it seems like your services fail to start. Can you post the output of your 
> logfile(s)?
> (~/.cache/gnunet/)
> 
> You may also open a bugreport on mantis if you want to attach files.
> Or you just copy relevant parts here.
> 
> BR
> Martin
> 
> > On 1. Feb 2020, at 21:37, Vikas Maurya <address@hidden> wrote:
> > 
> > Hi, 
> > I have recently installed gnunet(trying for the first time) and was trying 
> > single-user setup. 
> > but after installation when I run gnunet-arm -s and gnunet-arm -I , I see 
> > that most of the services are being stopped and when I run gnunet-peerinfo 
> > -s, I do not see any output. also gnunet-peerinfo-gtk does not display any 
> > information.
> > 
> > 
> > <snip>
> > $gnunet-arm -s 
> > $gnunet-arm -I
> > Services (excluding stopped services):
> > (started: 4 / failed: 6 / stopped: 30)
> > fs (binary='gnunet-service-fs', status=failed, exit_status=255, 
> > restart_delay='6 m')
> > revocation (binary='gnunet-service-revocation', status=failed, 
> > exit_status=255, restart_delay='6 m')
> > namestore (binary='gnunet-service-namestore', status=started)
> > gns (binary='gnunet-service-gns', status=failed, exit_status=255, 
> > restart_delay='6 m')
> > dht (binary='gnunet-service-dht', status=failed, exit_status=255, 
> > restart_delay='6 m')
> > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, 
> > restart_delay='6 m')
> > zonemaster (binary='gnunet-service-zonemaster', status=started)
> > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', 
> > status=started)
> > nse (binary='gnunet-service-nse', status=failed, exit_status=255, 
> > restart_delay='6 m')
> > topology (binary='gnunet-daemon-topology', status=started)
> > 
> > <snip>
> > 
> > can you please help me in identifying what I could have done wrong here. 
> > 
> > Thanks, 
> > Vikas
>