help-gnunet
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: no peer visible

From: Schanzenbach, Martin
Subject: Re: no peer visible
Date: Tue, 4 Feb 2020 17:24:42 +0100 
Maybe you accidentally started gnunet as root at some point? Is your user in 
the gnunet group?
Try deleting the folder (as root) and then start gnunet again.

BR

> On 4. Feb 2020, at 17:14, Vikas Maurya <address@hidden> wrote:
> 
> No, it says permission denied.
> :/tmp/gnunet-system-runtime$ touch test
> touch: cannot touch 'test': Permission denied
> 
> only in gnunet-system-runtime directory
> 
> On Mon, Feb 3, 2020 at 9:34 PM Schanzenbach, Martin <address@hidden> wrote:
> This is very odd.
> Can you create any files in that directory? i.e. have you tried
> 
> $ mkdir /tmp/gnunet-system-runtime
> $ touch /tmp/gnunet-system-runtime/test
> 
> BR
> 
> > On 3. Feb 2020, at 19:53, Vikas Maurya <address@hidden> wrote:
> > 
> > Hi, 
> > I have uninstalled and reinstalled gnunet using the installation guide 
> > mentioned above https://gnunet.org/en/install.html 
> > I followed all the steps to completion.but I am still not able to run the 
> > services and logfile shows the same error messages. 
> > 
> > <snip>
> > $ gnunet-arm -I
> > Services (excluding stopped services):
> > (started: 5 / failed: 6 / stopped: 31)
> > gns (binary='gnunet-service-gns', status=failed, exit_status=255, 
> > restart_delay='183 ms')
> > zonemaster (binary='gnunet-service-zonemaster', status=started)
> > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', 
> > status=started)
> > nse (binary='gnunet-service-nse', status=failed, exit_status=255, 
> > restart_delay='218 ms')
> > fs (binary='gnunet-service-fs', status=failed, exit_status=255, 
> > restart_delay='223 ms')
> > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, 
> > restart_delay='225 ms')
> > revocation (binary='gnunet-service-revocation', status=failed, 
> > exit_status=255, restart_delay='206 ms')
> > topology (binary='gnunet-daemon-topology', status=started)
> > dht (binary='gnunet-service-dht', status=failed, exit_status=255, 
> > restart_delay='184 ms')
> > hostlist (binary='gnunet-daemon-hostlist', status=started)
> > namestore (binary='gnunet-service-namestore', status=started)
> > 
> > <snip>
> > <snip>
> > 1 Feb 03 19:47:57-490752 arm-8968 ERROR `mkdir' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-dns.sock' at 
> > gnunet-service-arm.c:467 with error: Permission denied
> >   2 Feb 03 19:47:57-491004 arm-8968 WARNING Unable to bind listening socket 
> > for service `dns' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-dns.sock': Address already in 
> > use
> >   3 Feb 03 19:47:57-491240 arm-8968 ERROR `mkdir' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-peerstore.sock' at 
> > gnunet-service-arm.c:467 with error: Permission denied
> >   4 Feb 03 19:47:57-491289 arm-8968 WARNING Unable to bind listening socket 
> > for service `peerstore' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-peerstore.sock': Permission     
> > denied
> >   5 Feb 03 19:47:57-491340 arm-8968 ERROR `mkdir' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-set.sock' at 
> > gnunet-service-arm.c:467 with error: Permission denied
> >   6 Feb 03 19:47:57-491382 arm-8968 WARNING Unable to bind listening socket 
> > for service `set' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-set.sock': Address already in 
> > use
> >   7 Feb 03 19:47:57-491472 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-transport.sock' at 
> > network.c:238 with error: Permission denied
> >   8 Feb 03 19:47:57-491502 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-transport.sock' at 
> > network.c:238 with error: Permission denied
> >   9 Feb 03 19:47:57-491522 arm-8968 WARNING Unable to bind listening socket 
> > for service `transport' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-transport.sock': Address alr    
> > eady in use
> >  10 Feb 03 19:47:57-491600 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-regex.sock' at network.c:238 
> > with error: Permission denied
> >  11 Feb 03 19:47:57-491620 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-regex.sock' at network.c:238 
> > with error: Permission denied
> >  12 Feb 03 19:47:57-491632 arm-8968 WARNING Unable to bind listening socket 
> > for service `regex' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-regex.sock': Address already in 
> >     use
> >  13 Feb 03 19:47:57-491665 arm-8968 ERROR `mkdir' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-nat.sock' at 
> > gnunet-service-arm.c:467 with error: Permission denied
> >  14 Feb 03 19:47:57-491703 arm-8968 WARNING Unable to bind listening socket 
> > for service `nat' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-nat.sock': Permission denied
> >  15 Feb 03 19:47:57-491762 arm-8968 ERROR `mkdir' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-dht.sock' at 
> > gnunet-service-arm.c:467 with error: Permission denied
> >  16 Feb 03 19:47:57-491799 arm-8968 WARNING Unable to bind listening socket 
> > for service `dht' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-dht.sock': Address already in 
> > use
> >  17 Feb 03 19:47:57-491858 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-conversation.sock' at 
> > network.c:238 with error: Permission denied
> >  18 Feb 03 19:47:57-491877 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-conversation.sock' at 
> > network.c:238 with error: Permission denied
> >  19 Feb 03 19:47:57-491889 arm-8968 WARNING Unable to bind listening socket 
> > for service `conversation' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-conversation.sock': Addre    ss 
> > already in use
> >  20 Feb 03 19:47:57-491948 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-namecache.sock' at 
> > network.c:238 with error: Permission denied
> >  21 Feb 03 19:47:57-491967 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-namecache.sock' at 
> > network.c:238 with error: Permission denied
> >  22 Feb 03 19:47:57-491978 arm-8968 WARNING Unable to bind listening socket 
> > for service `namecache' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-namecache.sock': Address alr    
> > eady in use
> >  23 Feb 03 19:47:57-492046 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-statistics.sock' at 
> > network.c:238 with error: Permission denied
> >  24 Feb 03 19:47:57-492064 arm-8968 WARNING `unlink' failed on file 
> > `/tmp/gnunet-system-runtime//gnunet-service-statistics.sock' at 
> > network.c:238 with error: Permission denied
> >  25 Feb 03 19:47:57-492085 arm-8968 WARNING Unable to bind listening socket 
> > for service `statistics' to address 
> > `/tmp/gnunet-system-runtime//gnunet-service-statistics.sock': Address a    
> > lready in use
> > <snip>
> > 
> > Thanks, 
> > Vikas 
> > 
> > On Mon, Feb 3, 2020 at 5:20 PM Schanzenbach, Martin <address@hidden> wrote:
> > Hi,
> > 
> > 0. make sure you kill all processes of gnunet.
> > 1. Then run ./configure again (so that you get the text at the end). Do 
> > what is written there.
> > 2. Run make and make install again.
> > 3. Try running it again.
> > 
> > 
> > Alternatively, maybe check of of the installation guides here: 
> > https://gnunet.org/en/install.html
> > They include the steps you have to take.
> > 
> > BR
> > Martin 
> > 
> > > On 3. Feb 2020, at 16:57, Vikas Maurya <address@hidden> wrote:
> > > 
> > > Hi, 
> > > I used the following installation guide (compiled and installed using 
> > > source code)
> > > https://docs.gnunet.org/tutorial/gnunet-tutorial.html/Installation.html#Installation
> > > 
> > > but I am not sure if I followed the ./configure steps 
> > > 
> > > what can I do now to correct it?
> > > 
> > > I tried running after killing all gnunet process, But wasn't able to run 
> > > all services and got same error messages in log file. 
> > > 
> > > Thanks, 
> > > Vikas 
> > > 
> > > On Mon, Feb 3, 2020 at 4:34 PM Schanzenbach, Martin <address@hidden> 
> > > wrote:
> > > Hi,
> > > 
> > > did you follow one of the installation guides?
> > > As what user are you trying to start GNUnet?
> > > Did you follow the instructions printed after you did './configure'?
> > > 
> > > My guess the issue is with one of the above.
> > > Also check if any gnunet processes are currently running and kill them 
> > > before you try again.
> > > 
> > > BR
> > > Martin
> > > 
> > > > On 3. Feb 2020, at 16:11, Vikas Maurya <address@hidden> wrote:
> > > > 
> > > > 
> > > > 
> > > > ---------- Forwarded message ---------
> > > > From: Vikas Maurya <address@hidden>
> > > > Date: Mon, Feb 3, 2020 at 4:09 PM
> > > > Subject: Re: no peer visible
> > > > To: Schanzenbach, Martin <address@hidden>
> > > > 
> > > > 
> > > > Hi, 
> > > > This is common sequence of errors in the log file. I have also attached 
> > > > log file for your reference. one more thing to mention when I run sudo 
> > > > ss -ntlp, I see that gnunet-service is already listening on port 2086, 
> > > > even before running gnunet-arm -s . Is this a common behaviour? because 
> > > > one of the error in log file says port already in used 
> > > > $ sudo ss -ntlp
> > > > State           Recv-Q           Send-Q                      Local 
> > > > Address:Port                      Peer Address:Port                     
> > > >                                             
> > > > LISTEN          0                5                                 
> > > > 0.0.0.0:2086                           0.0.0.0:*               
> > > > users:(("gnunet-service-",pid=2144,fd=12))           
> > > > LISTEN          0                80                              
> > > > 127.0.0.1:3306                           0.0.0.0:*               
> > > > users:(("mysqld",pid=1783,fd=21))                    
> > > > LISTEN          0                128                         
> > > > 127.0.0.53%lo:53                             0.0.0.0:*               
> > > > users:(("systemd-resolve",pid=891,fd=13))            
> > > > LISTEN          0                5                               
> > > > 127.0.0.1:631                            0.0.0.0:*               
> > > > users:(("cupsd",pid=12959,fd=7))                     
> > > > LISTEN          0                5                                    
> > > > [::]:2086                              [::]:*               
> > > > users:(("gnunet-service-",pid=2144,fd=11))           
> > > > LISTEN          0                5                                   
> > > > [::1]:631                               [::]:*               
> > > > users:(("cupsd",pid=12959,fd=6))                     
> > > > logfile output. 
> > > > 
> > > > <snip>
> > > > 60 Feb 03 16:00:25-207988 revocation-22631 ERROR `mkdir' failed on file 
> > > > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at 
> > > > service.c:1140 with error: Permission denied
> > > >  61 Feb 03 16:00:25-208096 nse-22642 ERROR Could not bind to any of the 
> > > > ports I was supposed to, refusing to run!
> > > >  62 Feb 03 16:00:25-208239 util-service-22631 ERROR `bind' failed at 
> > > > service.c:1405 with error: Permission denied
> > > >  63 Feb 03 16:00:25-208281 revocation-22631 ERROR `bind' failed at 
> > > > service.c:1558 with error: Success
> > > >  64 Feb 03 16:00:25-208304 revocation-22631 ERROR Could not bind to any 
> > > > of the ports I was supposed to, refusing to run!
> > > >  65 Feb 03 16:00:25-208924 arm-22628 WARNING Service `nse' terminated 
> > > > with status exit/255, will restart in 4 ms
> > > >  66 Feb 03 16:00:25-209153 arm-22628 WARNING Service `revocation' 
> > > > terminated with status exit/255, will restart in 1 ms
> > > >  67 Feb 03 16:00:25-215409 gns-22632 ERROR `mkdir' failed on file 
> > > > `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 
> > > > with error: Permission denied
> > > >  68 Feb 03 16:00:25-215592 util-service-22632 ERROR `bind' failed at 
> > > > service.c:1405 with error: Permission denied
> > > >  69 Feb 03 16:00:25-215627 gns-22632 ERROR `bind' failed at 
> > > > service.c:1558 with error: Success
> > > >  70 Feb 03 16:00:25-215648 gns-22632 ERROR Could not bind to any of the 
> > > > ports I was supposed to, refusing to run!
> > > >  71 Feb 03 16:00:25-216175 revocation-22643 ERROR `mkdir' failed on 
> > > > file `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at 
> > > > service.c:1140 with error: Permission denied
> > > >  72 Feb 03 16:00:25-216303 util-service-22643 ERROR `bind' failed at 
> > > > service.c:1405 with error: Permission denied
> > > >  73 Feb 03 16:00:25-216337 revocation-22643 ERROR `bind' failed at 
> > > > service.c:1558 with error: Success
> > > >  74 Feb 03 16:00:25-216358 revocation-22643 ERROR Could not bind to any 
> > > > of the ports I was supposed to, refusing to run!
> > > >  75 Feb 03 16:00:25-216345 arm-22628 WARNING Service `gns' terminated 
> > > > with status exit/255, will restart in 1 ms
> > > >  76 Feb 03 16:00:25-216747 arm-22628 WARNING Service `revocation' 
> > > > terminated with status exit/255, will restart in 2 ms
> > > >  77 Feb 03 16:00:25-219790 nse-22644 ERROR `mkdir' failed on file 
> > > > `/tmp/gnunet-system-runtime//gnunet-service-nse.sock' at service.c:1140 
> > > > with error: Permission denied
> > > >  78 Feb 03 16:00:25-219925 util-service-22644 ERROR `bind' failed at 
> > > > service.c:1405 with error: Permission denied
> > > >  79 Feb 03 16:00:25-219951 nse-22644 ERROR `bind' failed at 
> > > > service.c:1558 with error: Success
> > > >  80 Feb 03 16:00:25-219977 nse-22644 ERROR Could not bind to any of the 
> > > > ports I was supposed to, refusing to run!
> > > >  81 Feb 03 16:00:25-220458 arm-22628 WARNING Service `nse' terminated 
> > > > with status exit/255, will restart in 8 ms
> > > >  82 Feb 03 16:00:25-222676 gns-22645 ERROR `mkdir' failed on file 
> > > > `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 
> > > > with error: Permission denied
> > > >  83 Feb 03 16:00:25-222770 util-service-22645 ERROR `bind' failed at 
> > > > service.c:1405 with error: Permission denied
> > > >  84 Feb 03 16:00:25-222786 gns-22645 ERROR `bind' failed at 
> > > > service.c:1558 with error: Success
> > > >  85 Feb 03 16:00:25-222795 gns-22645 ERROR Could not bind to any of the 
> > > > ports I was supposed to, refusing to run!
> > > >  86 Feb 03 16:00:25-222919 revocation-22646 ERROR `mkdir' failed on 
> > > > file `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at 
> > > > service.c:1140 with error: Permission denied
> > > >  87 Feb 03 16:00:25-223009 util-service-22646 ERROR `bind' failed at 
> > > > service.c:1405 with error: Permission denied
> > > >  88 Feb 03 16:00:25-223025 revocation-22646 ERROR `bind' failed at 
> > > > service.c:1558 with error: Success
> > > > 
> > > > <snip> 
> > > > 
> > > > On Sun, Feb 2, 2020 at 10:55 PM Schanzenbach, Martin <address@hidden> 
> > > > wrote:
> > > > Hi,
> > > > 
> > > > it seems like your services fail to start. Can you post the output of 
> > > > your logfile(s)?
> > > > (~/.cache/gnunet/)
> > > > 
> > > > You may also open a bugreport on mantis if you want to attach files.
> > > > Or you just copy relevant parts here.
> > > > 
> > > > BR
> > > > Martin
> > > > 
> > > > > On 1. Feb 2020, at 21:37, Vikas Maurya <address@hidden> wrote:
> > > > > 
> > > > > Hi, 
> > > > > I have recently installed gnunet(trying for the first time) and was 
> > > > > trying single-user setup. 
> > > > > but after installation when I run gnunet-arm -s and gnunet-arm -I , I 
> > > > > see that most of the services are being stopped and when I run 
> > > > > gnunet-peerinfo -s, I do not see any output. also gnunet-peerinfo-gtk 
> > > > > does not display any information.
> > > > > 
> > > > > 
> > > > > <snip>
> > > > > $gnunet-arm -s 
> > > > > $gnunet-arm -I
> > > > > Services (excluding stopped services):
> > > > > (started: 4 / failed: 6 / stopped: 30)
> > > > > fs (binary='gnunet-service-fs', status=failed, exit_status=255, 
> > > > > restart_delay='6 m')
> > > > > revocation (binary='gnunet-service-revocation', status=failed, 
> > > > > exit_status=255, restart_delay='6 m')
> > > > > namestore (binary='gnunet-service-namestore', status=started)
> > > > > gns (binary='gnunet-service-gns', status=failed, exit_status=255, 
> > > > > restart_delay='6 m')
> > > > > dht (binary='gnunet-service-dht', status=failed, exit_status=255, 
> > > > > restart_delay='6 m')
> > > > > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, 
> > > > > restart_delay='6 m')
> > > > > zonemaster (binary='gnunet-service-zonemaster', status=started)
> > > > > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', 
> > > > > status=started)
> > > > > nse (binary='gnunet-service-nse', status=failed, exit_status=255, 
> > > > > restart_delay='6 m')
> > > > > topology (binary='gnunet-daemon-topology', status=started)
> > > > > 
> > > > > <snip>
> > > > > 
> > > > > can you please help me in identifying what I could have done wrong 
> > > > > here. 
> > > > > 
> > > > > Thanks, 
> > > > > Vikas
> > > > 
> > > 
> > 
>
reply via email to
[Prev in Thread] Current Thread [Next in Thread]