GNU/Hurd doesn't boot after install

[Lukas Solanka]

Hi,

I installed Debian GNU/Hurd using crosshurd. When booting for the first
time to single user mode, I get this sequence of messages:

-----
/libexec/console-run: /dev/console: No such file or directory
/libexec/console-run: Using temporary console /tmp/console
/hurd/init: /libexec/runsystem terminated abnormally (Killed)
/libexec/console-run: /dev/console: No such file or directory
/libexec/console-run: /tmp/console: Device or resource busy
/libexec/console-run: using temporary console /tmp
/hurd/init: bin/sh teminated abnormally (Killed)
/libexec/console-run: /dev/console: No such file or directory
/libexec/console-run: /tmp/console: Not a directory
/libexec/console-run: /hurd/term: Not a directory
/libexec/console-run: /tmp: Device or resource busy
/hurd/init: /bin/shd terminated abnormally (Killed)
init: notifying ext2fs.static device: hd0s11 of shutdown...init:
Rebooting Mach(flags 0)...
----

And then after few seconds the maschine reboots.

I have an ide controller: VIA VT82C586B

cat /proc/interrupts:
          CPU0
  0:   60353596    IO-APIC-edge  timer
  1:     121079      IO-APIC-edge  i8042
  7:          4           IO-APIC-edge  parport0
  8:         12          IO-APIC-edge  rtc
  9:     376783      IO-APIC-level  acpi
 12:      61877      IO-APIC-edge  i8042
 14:     262059     IO-APIC-edge  ide0
 15:     250283     IO-APIC-edge  ide1
169:    1125003   IO-APIC-level  eth0
177:     723117    IO-APIC-level  ehci_hcd, uhci_hcd, uhci_hcd, uhci_hcd
185:          0         IO-APIC-level  yenta
193:          0         IO-APIC-level  yenta
201:          3         IO-APIC-level  ohci1394
209:    2624402   IO-APIC-level  VIA8233, VIA82XX-MODEM
NMI:          0
LOC:   60351841
ERR:         11
MIS:          0

the contents of my /boot/grub/menu.lst:

title                Debian GNU/Hurd
root                (hd0,10)
kernel            (hd0,10)/boot/gnumach.gz root=device:hd0s11 -s
module          (hd0,10)/hurd/ext2fs.static
--multiboot-command-line=${kernel-command-line}
--host-priv-port=${host-port} --device-master-port=${device-port}
--exec-server-task=${exec-task} -T typed ${root} $(task-create)
$(task-resume)
module          (hd0,10)/lib/ld.so.1 /hurd/exec $(exec-task=task-create)
boot


hope I gave you relevant information...

Thank you,
Lukas Solanka

-- 
Lukas Solanka
KPPV A03/511
Kolejni 2 
612 00 Brno

tel.cz: +420776 759439
tel.sk: +421910 124855