[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Noob with simple question about FORCE: (long)
|
From: |
Robert Webb |
|
Subject: |
Noob with simple question about FORCE: (long) |
|
Date: |
Wed, 02 Nov 2005 14:59:07 -0500 |
I have come across a Makefile that has two sections like
"include/asterisk/version.h: FORCE" in them. My issue is
that if I run a make install and the make aborts due to a
missing dependcy in the script and I then run a make clean
then any make command again, these two sections with FORCE
run and keep looping. If I remove the FORCE from the two
sections, the make clean runs as expected and cleans the
directories.
The Makefile is below:
#
# Asterisk -- A telephony toolkit for Linux.
#
# Top level Makefile
#
# Copyright (C) 1999-2005, Mark Spencer
#
# Mark Spencer <address@hidden>
#
# This program is free software, distributed under the
terms of
# the GNU General Public License
#
.EXPORT_ALL_VARIABLES:
# Create OPTIONS variable
OPTIONS=
# If cross compiling, define these to suit
#
CROSS_COMPILE=/opt/montavista/pro/devkit/arm/xscale_be/bin/xscale_be-
#
CROSS_COMPILE_BIN=/opt/montavista/pro/devkit/arm/xscale_be/bin/
#
CROSS_COMPILE_TARGET=/opt/montavista/pro/devkit/arm/xscale_be/target
CC=$(CROSS_COMPILE)gcc
HOST_CC=gcc
# CROSS_ARCH=Linux
# CROSS_PROC=arm
# SUB_PROC=xscale # or maverick
ifeq ($(CROSS_COMPILE),)
OSARCH=$(shell uname -s)
OSREV=$(shell uname -r)
else
OSARCH=$(CROSS_ARCH)
OSREV=$(CROSS_REV)
endif
# Remember the MAKELEVEL at the top
MAKETOPLEVEL?=$(MAKELEVEL)
######### More GSM codec optimization
######### Uncomment to enable MMXTM optimizations for x86
architecture CPU's
######### which support MMX instructions. This should be
newer pentiums,
######### ppro's, etc, as well as the AMD K6 and K7.
#K6OPT = -DK6OPT
#Overwite config files on "make samples"
OVERWRITE=y
#Tell gcc to optimize the code
OPTIMIZE+=-O6
#Include debug symbols in the executables (-g) and
profiling info (-pg)
DEBUG=-g #-pg
#Set NOCRYPTO to yes if you do not want to have crypto
support or
#dependencies
#NOCRYPTO=yes
# If you are running a radio application, define
RADIO_RELAX so that the DTMF
# will be received more reliably
#OPTIONS += -DRADIO_RELAX
# If you don't have a lot of memory (e.g. embedded
Asterisk), define LOW_MEMORY
# to reduce the size of certain static buffers
#ifneq ($(CROSS_COMPILE),)
#OPTIONS += -DLOW_MEMORY
#endif
# Optional debugging parameters
DEBUG_THREADS = #-DDUMP_SCHEDULER #-DDEBUG_SCHEDULER
#-DDEBUG_THREADS #-DDO_CRASH #-DDETECT_DEADLOCKS
# Uncomment next one to enable ast_frame tracing (for
debugging)
TRACE_FRAMES = #-DTRACE_FRAMES
# Uncomment next one to enable malloc debugging
# You can view malloc debugging with:
# *CLI> show memory allocations [filename]
# *CLI> show memory summary [filename]
#
MALLOC_DEBUG = #-include $(PWD)/include/asterisk/astmm.h
# Where to install asterisk after compiling
# Default -> leave empty
INSTALL_PREFIX?=
# Staging directory
# Files are copied here temporarily during the install
process
# For example, make DESTDIR=/tmp/asterisk woud put things
in
# /tmp/asterisk/etc/asterisk
DESTDIR=
# Original busydetect routine
BUSYDETECT = #-DBUSYDETECT
# Improved busydetect routine, comment the previous one if
you use this one
BUSYDETECT+= #-DBUSYDETECT_MARTIN
# Detect the busy signal looking only at tone lengths
# For example if you have 3 beeps 100ms tone, 100ms
silence separated by 500 ms of silence
BUSYDETECT+= #-DBUSYDETECT_TONEONLY
# Inforce the detection of busy singal (get rid of false
hangups)
# Don't use together with -DBUSYDETECT_TONEONLY
BUSYDETECT+= #-DBUSYDETECT_COMPARE_TONE_AND_SILENCE
ifneq (${OSARCH},SunOS)
ASTLIBDIR=$(INSTALL_PREFIX)/usr/lib/asterisk
ASTVARLIBDIR=$(INSTALL_PREFIX)/var/lib/asterisk
ASTETCDIR=$(INSTALL_PREFIX)/etc/asterisk
ASTSPOOLDIR=$(INSTALL_PREFIX)/var/spool/asterisk
ASTLOGDIR=$(INSTALL_PREFIX)/var/log/asterisk
ASTHEADERDIR=$(INSTALL_PREFIX)/usr/include/asterisk
ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
ASTBINDIR=$(INSTALL_PREFIX)/usr/bin
ASTSBINDIR=$(INSTALL_PREFIX)/usr/sbin
ASTVARRUNDIR=$(INSTALL_PREFIX)/var/run
ASTMANDIR=$(INSTALL_PREFIX)/usr/share/man
MODULES_DIR=$(ASTLIBDIR)/modules
AGI_DIR=$(ASTVARLIBDIR)/agi-bin
else
ASTLIBDIR=$(INSTALL_PREFIX)/opt/asterisk/lib
ASTVARLIBDIR=$(INSTALL_PREFIX)/var/opt/asterisk/lib
ASTETCDIR=$(INSTALL_PREFIX)/etc/opt/asterisk
ASTSPOOLDIR=$(INSTALL_PREFIX)/var/opt/asterisk/spool
ASTLOGDIR=$(INSTALL_PREFIX)/var/opt/asterisk/log
ASTHEADERDIR=$(INSTALL_PREFIX)/opt/asterisk/usr/include/asterisk
ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
ASTBINDIR=$(INSTALL_PREFIX)/opt/asterisk/usr/bin
ASTSBINDIR=$(INSTALL_PREFIX)/opt/asterisk/usr/sbin
ASTVARRUNDIR=$(INSTALL_PREFIX)/var/opt/asterisk/run
ASTMANDIR=$(INSTALL_PREFIX)/opt/asterisk/usr/share/man
MODULES_DIR=$(ASTLIBDIR)/modules
AGI_DIR=$(ASTVARLIBDIR)/agi-bin
endif
ASTCFLAGS=
# Pentium Pro Optimize
#PROC=i686
# Pentium & VIA processors optimize
#PROC=i586
#PROC=k6
#PROC=ppc
#Uncomment this to use the older DSP routines
#ASTCFLAGS+=-DOLD_DSP_ROUTINES
# Determine by a grep 'DocumentRoot' of your httpd.conf
file
HTTP_DOCSDIR=/var/www/html
# Determine by a grep 'ScriptAlias' of your httpd.conf
file
HTTP_CGIDIR=/var/www/cgi-bin
# If the file .asterisk.makeopts is present in your home
directory, you can
# include all of your favorite Makefile options so that
every time you download
# a new version of Asterisk, you don't have to edit the
makefile to set them.
# The file, /etc/asterisk.makeopts will also be included,
but can be overridden
# by the file in your home directory.
ifneq ($(wildcard /etc/asterisk.makeopts),)
include /etc/asterisk.makeopts
endif
ifneq ($(wildcard ~/.asterisk.makeopts),)
include ~/.asterisk.makeopts
endif
ifeq (${OSARCH},Linux)
ifeq ($(CROSS_COMPILE),)
PROC?=$(shell uname -m)
else
PROC=$(CROSS_PROC)
endif
ifeq ($(PROC),x86_64)
# You must have GCC 3.4 to use k8, otherwise use
athlon
PROC=k8
#PROC=athlon
OPTIONS+=-m64
endif
ifeq ($(PROC),sparc64)
#The problem with sparc is the best stuff is in newer
versions of gcc (post 3.0) only.
#This works for even old (2.96) versions of gcc and
provides a small boost either way.
#A ultrasparc cpu is really v9 but the stock debian
stable 3.0 gcc doesn't support it.
#So we go lowest common available by gcc and go a
step down, still a step up from
#the default as we now have a better instruction set
to work with. - Belgarath
PROC=ultrasparc
OPTIONS+=$(shell if $(CC) -mtune=$(PROC) -S -o
/dev/null -xc /dev/null >/dev/null 2>&1; then echo
"-mtune=$(PROC)"; fi)
OPTIONS+=$(shell if $(CC) -mcpu=v8 -S -o /dev/null
-xc /dev/null >/dev/null 2>&1; then echo "-mcpu=v8"; fi)
OPTIONS+=-fomit-frame-pointer
endif
ifeq ($(PROC),arm)
# The Cirrus logic is the only heavily shipping arm
processor with a real floating point unit
ifeq ($(SUB_PROC),maverick)
OPTIONS+=-fsigned-char -mcpu=ep9312
else
ifeq ($(SUB_PROC),xscale)
OPTIONS+=-fsigned-char -msoft-float -mcpu=xscale
else
OPTIONS+=-fsigned-char -msoft-float
endif
endif
endif
MPG123TARG=linux
endif
PWD=$(shell pwd)
GREP=grep
ifeq (${OSARCH},SunOS)
GREP=/usr/xpg4/bin/grep
M4=/usr/local/bin/m4
endif
INCLUDE+=-Iinclude -I../include
ASTCFLAGS+=-pipe -Wall -Wstrict-prototypes
-Wmissing-prototypes -Wmissing-declarations $(DEBUG)
$(INCLUDE) -D_REENTRANT -D_GNU_SOURCE
#-DMAKE_VALGRIND_HAPPY
ASTCFLAGS+=$(OPTIMIZE)
ifeq ($(findstring BSD,${OSARCH}),BSD)
PROC=$(shell uname -m)
ASTCFLAGS+=-I$(CROSS_COMPILE_TARGET)/usr/local/include
-L$(CROSS_COMPILE_TARGET)/usr/local/lib
endif
ifneq ($(PROC),ultrasparc)
ASTCFLAGS+=$(shell if $(CC) -march=$(PROC) -S -o
/dev/null -xc /dev/null >/dev/null 2>&1; then echo
"-march=$(PROC)"; fi)
endif
ifeq ($(PROC),ppc)
ASTCFLAGS+=-fsigned-char
endif
ifneq ($(wildcard
$(CROSS_COMPILE_TARGET)/usr/local/include/osp/osp.h),)
ASTCFLAGS+=-DOSP_SUPPORT
-I$(CROSS_COMPILE_TARGET)/usr/local/include/osp
else
ifneq ($(wildcard
$(CROSS_COMPILE_TARGET)/usr/include/osp/osp.h),)
ASTCFLAGS+=-DOSP_SUPPORT
-I$(CROSS_COMPILE_TARGET)/usr/include/osp
endif
endif
ifeq (${OSARCH},FreeBSD)
BSDVERSION=$(shell make -V OSVERSION -f
$(CROSS_COMPILE_TARGET)/usr/share/mk/bsd.port.subdir.mk)
ASTCFLAGS+=$(shell if test ${BSDVERSION} -lt 500016 ;
then echo "-D_THREAD_SAFE"; fi)
LIBS+=$(shell if test ${BSDVERSION} -lt 502102 ; then
echo "-lc_r"; else echo "-pthread"; fi)
ifneq ($(wildcard
$(CROSS_COMPILE_TARGET)/usr/local/include/spandsp),)
ASTCFLAGS+=-I$(CROSS_COMPILE_TARGET)/usr/local/include/spandsp
endif
MPG123TARG=freebsd
endif # FreeBSD
ifeq (${OSARCH},NetBSD)
ASTCFLAGS+=-pthread
INCLUDE+=-I$(CROSS_COMPILE_TARGET)/usr/pkg/include
MPG123TARG=netbsd
endif
ifeq (${OSARCH},OpenBSD)
ASTCFLAGS+=-pthread
endif
ifeq (${OSARCH},SunOS)
ASTCFLAGS+=-Wcast-align -DSOLARIS
INCLUDE+=-Iinclude/solaris-compat
-I$(CROSS_COMPILE_TARGET)/usr/local/ssl/include
endif
ifneq ($(wildcard
$(CROSS_COMPILE_TARGET)/usr/include/linux/zaptel.h)$(wildcard
$(CROSS_COMPILE_TARGET)/usr/local/include/zaptel.h)$(wildcard
$(CROSS_COMPILE_TARGET)/usr/pkg/include/zaptel.h),)
ASTCFLAGS+=-DZAPTEL_OPTIMIZATIONS
endif
LIBEDIT=editline/libedit.a
ifneq ($(wildcard .version),)
ASTERISKVERSION=$(shell cat .version)
ASTERISKVERSIONNUM=$(shell awk -F. '{printf
"%02d%02d%02d", $$1, $$2, $$3}' .version)
RPMVERSION=$(shell sed 's/[-\/:]/_/g' .version)
else
RPMVERSION=unknown
endif
ifneq ($(wildcard CVS),)
ASTERISKVERSIONNUM=999999
ifneq ($(wildcard CVS/Tag),)
ASTERISKVERSION=$(shell echo "CVS-`sed 's/^T//g'
CVS/Tag`-`date +"%D-%T"`")
else
ASTERISKVERSION=CVS HEAD
endif
else
ASTERISKVERSIONNUM=000000
endif
ASTCFLAGS+= $(DEBUG_THREADS)
ASTCFLAGS+= $(TRACE_FRAMES)
ASTCFLAGS+= $(MALLOC_DEBUG)
ASTCFLAGS+= $(BUSYDETECT)
ASTCFLAGS+= $(OPTIONS)
ASTCFLAGS+= -fomit-frame-pointer
SUBDIRS=res channels pbx apps codecs formats agi cdr funcs
utils stdtime
OBJS=io.o sched.o logger.o frame.o loader.o config.o
channel.o \
translate.o file.o say.o pbx.o cli.o md5.o term.o \
ulaw.o alaw.o callerid.o fskmodem.o image.o app.o \
cdr.o tdd.o acl.o rtp.o manager.o asterisk.o \
dsp.o chanvars.o indications.o autoservice.o db.o
privacy.o \
astmm.o enum.o srv.o dns.o aescrypt.o aestab.o aeskey.o \
utils.o plc.o jitterbuf.o dnsmgr.o devicestate.o \
netsock.o slinfactory.o ast_expr2.o ast_expr2f.o \
cryptostub.o
ifeq ($(wildcard
$(CROSS_COMPILE_TARGET)/usr/include/sys/poll.h),)
OBJS+= poll.o
ASTCFLAGS+=-DPOLLCOMPAT
endif
ifeq ($(wildcard
$(CROSS_COMPILE_TARGET)/usr/include/dlfcn.h),)
OBJS+= dlfcn.o
ASTCFLAGS+=-DDLFCNCOMPAT
endif
ifeq (${OSARCH},Linux)
LIBS+=-ldl -lpthread -lncurses -lm -lresolv #-lnjamd
else
LIBS+=-lncurses -lm
endif
ifeq (${OSARCH},Darwin)
LIBS+=-lresolv
ASTCFLAGS+=-D__Darwin__
AUDIO_LIBS=-framework CoreAudio
ASTLINK=-Wl,-dynamic
SOLINK=-dynamic -bundle -undefined suppress
-force_flat_namespace
else
#These are used for all but Darwin
ASTLINK=-Wl,-E
SOLINK=-shared -Xlinker -x
endif
ifeq (${OSARCH},FreeBSD)
LIBS+=-lcrypto
endif
ifeq (${OSARCH},NetBSD)
LIBS+=-lpthread -lcrypto -lm
-L$(CROSS_COMPILE_TARGET)/usr/pkg/lib -lncurses
endif
ifeq (${OSARCH},OpenBSD)
LIBS+=-lcrypto -lpthread -lm -lncurses
endif
ifeq (${OSARCH},SunOS)
LIBS+=-lpthread -ldl -lnsl -lsocket -lresolv
-L$(CROSS_COMPILE_TARGET)/usr/local/ssl/lib
OBJS+=strcompat.o
ASTLINK=
SOLINK=-shared -fpic
-L$(CROSS_COMPILE_TARGET)/usr/local/ssl/lib
endif
ifeq ($(MAKETOPLEVEL),$(MAKELEVEL))
CFLAGS+=$(ASTCFLAGS)
endif
LIBS+=-lssl
INSTALL=install
_all: all
@echo " +--------- Asterisk Build Complete ---------+"
@echo " + Asterisk has successfully been built, but +"
@echo " + cannot be run before being installed by +"
@echo " + running: +"
@echo " + +"
@echo " + $(MAKE) install +"
@echo " +-------------------------------------------+"
all: cleantest depend asterisk subdirs
#ifneq ($(wildcard tags),)
ctags: tags
#endif
ifneq ($(wildcard TAGS),)
all: TAGS
endif
noclean: depend asterisk subdirs
editline/config.h:
cd editline && unset CFLAGS LIBS && ./configure ; \
editline/libedit.a: FORCE
cd editline && unset CFLAGS LIBS && test -f config.h ||
./configure
$(MAKE) -C editline libedit.a
db1-ast/libdb1.a: FORCE
@if [ -d db1-ast ]; then \
$(MAKE) -C db1-ast libdb1.a ; \
else \
echo "You need to do a cvs update -d not just cvs
update"; \
exit 1; \
fi
ifneq ($(wildcard .depend),)
include .depend
endif
ifneq ($(wildcard .tags-depend),)
include .tags-depend
endif
ast_expr2.c:
bison -d --name-prefix=ast_yy ast_expr2.y -o ast_expr2.c
ast_expr2f.c:
flex --full ast_expr2.fl
testexpr2: ast_expr2f.c ast_expr2.c ast_expr2.h
gcc -g -c -DSTANDALONE ast_expr2f.c
gcc -g -c -DSTANDALONE ast_expr2.c
gcc -g -o testexpr2 ast_expr2f.o ast_expr2.o
rm ast_expr2.o ast_expr2f.o
manpage: asterisk.8
asterisk.8: asterisk.sgml
rm -f asterisk.8
docbook2man asterisk.sgml
mv ./*.8 asterisk.8
asterisk.pdf: asterisk.sgml
docbook2pdf asterisk.sgml
asterisk.ps: asterisk.sgml
docbook2ps asterisk.sgml
asterisk.html: asterisk.sgml
docbook2html asterisk.sgml
mv r1.html asterisk.html
asterisk.txt: asterisk.sgml
docbook2txt asterisk.sgml
defaults.h: FORCE
build_tools/make_defaults_h > address@hidden
if cmp -s address@hidden $@ ; then echo ; else \
mv address@hidden $@ ; \
fi
rm -f address@hidden
include/asterisk/build.h:
build_tools/make_build_h > address@hidden
if cmp -s address@hidden $@ ; then echo ; else \
mv address@hidden $@ ; \
fi
rm -f address@hidden
# only force 'build.h' to be made for a non-'install' run
ifeq ($(findstring install,$(MAKECMDGOALS)),)
include/asterisk/build.h: FORCE
endif
include/asterisk/version.h: FORCE
build_tools/make_version_h > address@hidden
if cmp -s address@hidden $@ ; then echo; else \
mv address@hidden $@ ; \
fi
rm -f address@hidden
stdtime/libtime.a: FORCE
@if [ -d stdtime ]; then \
$(MAKE) -C stdtime libtime.a ; \
else \
echo "You need to do a cvs update -d not just cvs
update"; \
exit 1; \
fi
asterisk: editline/libedit.a db1-ast/libdb1.a
stdtime/libtime.a $(OBJS)
$(CC) $(DEBUG) -o asterisk $(ASTLINK) $(OBJS) $(LIBEDIT)
db1-ast/libdb1.a stdtime/libtime.a $(LIBS)
muted: muted.o
$(CC) $(AUDIO_LIBS) -o muted muted.o
subdirs:
for x in $(SUBDIRS); do $(MAKE) -C $$x || exit 1 ; done
clean:
for x in $(SUBDIRS); do $(MAKE) -C $$x clean || exit 1 ;
done
rm -f *.o *.so asterisk .depend
rm -f defaults.h
rm -f include/asterisk/build.h
rm -f include/asterisk/version.h
rm -f .tags-depend .tags-sources tags TAGS
@if [ -f editline/Makefile ]; then $(MAKE) -C editline
distclean ; fi
@if [ -d mpg123-0.59r ]; then $(MAKE) -C mpg123-0.59r
clean; fi
$(MAKE) -C db1-ast clean
$(MAKE) -C stdtime clean
datafiles: all
if test $$(id -u) = 0; then sh mkpkgconfig
$(DESTDIR)/usr/lib/pkgconfig; fi
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/sounds/digits
mkdir -p
$(DESTDIR)$(ASTVARLIBDIR)/sounds/priv-callerintros
for x in sounds/digits/*.gsm; do \
if $(GREP) -q "^%`basename $$x`%" sounds.txt; then \
$(INSTALL) -m 644 $$x
$(DESTDIR)$(ASTVARLIBDIR)/sounds/digits ; \
else \
echo "No description for $$x"; \
exit 1; \
fi; \
done
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/sounds/dictate
for x in sounds/dictate/*.gsm; do \
if $(GREP) -q "^%`basename $$x`%" sounds.txt; then \
$(INSTALL) -m 644 $$x
$(DESTDIR)$(ASTVARLIBDIR)/sounds/dictate ; \
else \
echo "No description for $$x"; \
exit 1; \
fi; \
done
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/sounds/letters
for x in sounds/letters/*.gsm; do \
if $(GREP) -q "^%`basename $$x`%" sounds.txt; then \
$(INSTALL) -m 644 $$x
$(DESTDIR)$(ASTVARLIBDIR)/sounds/letters ; \
else \
echo "No description for $$x"; \
exit 1; \
fi; \
done
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/sounds/phonetic
for x in sounds/phonetic/*.gsm; do \
if $(GREP) -q "^%`basename $$x`%" sounds.txt; then \
$(INSTALL) -m 644 $$x
$(DESTDIR)$(ASTVARLIBDIR)/sounds/phonetic ; \
else \
echo "No description for $$x"; \
exit 1; \
fi; \
done
for x in sounds/demo-* sounds/vm-* sounds/transfer*
sounds/pbx-* sounds/ss-* sounds/beep* sounds/dir-*
sounds/conf-* sounds/agent-* sounds/invalid* sounds/tt-*
sounds/auth-* sounds/privacy-* sounds/queue-* sounds/spy-*
sounds/priv-* sounds/screen-* sounds/hello-*; do \
if $(GREP) -q "^%`basename $$x`%" sounds.txt; then \
$(INSTALL) -m 644 $$x $(DESTDIR)$(ASTVARLIBDIR)/sounds
; \
else \
echo "No description for $$x"; \
exit 1; \
fi; \
done
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/mohmp3
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/images
for x in images/*.jpg; do \
$(INSTALL) -m 644 $$x $(DESTDIR)$(ASTVARLIBDIR)/images ;
\
done
mkdir -p $(DESTDIR)$(AGI_DIR)
update:
@if [ -d CVS ]; then \
if [ -f patches/.applied ]; then \
patches=`cat patches/.applied`; \
fi; \
if [ ! -z "$$patches" ]; then \
for x in $$patches; do \
echo "Unapplying $$x..."; \
patch -R -p0 < patches/$$x; \
done; \
rm -f patches/.applied; \
fi ; \
echo "Updating from CVS..." ; \
cvs -q -z3 update -Pd | tee update.out; \
rm -f .version; \
if [ `grep -c ^C update.out` -gt 0 ]; then \
echo ; echo "The following files have conflicts:" ; \
grep ^C update.out | cut -d' ' -f2- ; \
fi ; \
rm -f update.out; \
if [ ! -z "$$patches" ]; then \
for x in $$patches; do \
if [ -f patches/$$x ]; then \
echo "Applying patch $$x..."; \
patch -p0 < patches/$$x; \
echo $$x >> patches/.applied; \
else \
echo "Patch $$x no longer relevant"; \
fi; \
done; \
fi; \
else \
echo "Not CVS"; \
fi
NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
OLDHEADERS=$(filter-out $(NEWHEADERS),$(notdir $(wildcard
$(DESTDIR)$(ASTHEADERDIR)/*.h)))
bininstall: all
mkdir -p $(DESTDIR)$(MODULES_DIR)
mkdir -p $(DESTDIR)$(ASTSBINDIR)
mkdir -p $(DESTDIR)$(ASTETCDIR)
mkdir -p $(DESTDIR)$(ASTBINDIR)
mkdir -p $(DESTDIR)$(ASTVARRUNDIR)
mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail
mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/dictate
mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/system
mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/tmp
mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/meetme
$(INSTALL) -m 755 asterisk $(DESTDIR)$(ASTSBINDIR)/
ln -sf asterisk $(DESTDIR)$(ASTSBINDIR)/rasterisk
$(INSTALL) -m 755 contrib/scripts/astgenkey
$(DESTDIR)$(ASTSBINDIR)/
$(INSTALL) -m 755 contrib/scripts/autosupport
$(DESTDIR)$(ASTSBINDIR)/
if [ ! -f $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ]; then \
cat contrib/scripts/safe_asterisk | sed
's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;' >
$(DESTDIR)$(ASTSBINDIR)/safe_asterisk ;\
chmod 755 $(DESTDIR)$(ASTSBINDIR)/safe_asterisk;\
fi
for x in $(SUBDIRS); do $(MAKE) -C $$x install || exit 1
; done
$(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)
$(INSTALL) -m 644 include/asterisk/*.h
$(DESTDIR)$(ASTHEADERDIR)
if [ -n "$(OLDHEADERS)" ]; then \
rm -f $(addprefix
$(DESTDIR)$(ASTHEADERDIR)/,$(OLDHEADERS)) ;\
fi
rm -f $(DESTDIR)$(ASTVARLIBDIR)/sounds/voicemail
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/sounds
mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-csv
mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-custom
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/keys
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/firmware
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/firmware/iax
mkdir -p $(DESTDIR)$(ASTMANDIR)/man8
$(INSTALL) -m 644 keys/iaxtel.pub
$(DESTDIR)$(ASTVARLIBDIR)/keys
$(INSTALL) -m 644 keys/freeworlddialup.pub
$(DESTDIR)$(ASTVARLIBDIR)/keys
$(INSTALL) -m 644 asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
$(INSTALL) -m 644 contrib/scripts/astgenkey.8
$(DESTDIR)$(ASTMANDIR)/man8
$(INSTALL) -m 644 contrib/scripts/autosupport.8
$(DESTDIR)$(ASTMANDIR)/man8
$(INSTALL) -m 644 contrib/scripts/safe_asterisk.8
$(DESTDIR)$(ASTMANDIR)/man8
if [ -d contrib/firmware/iax ]; then \
$(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin
$(DESTDIR)$(ASTVARLIBDIR)/firmware/iax/iaxy.bin; \
else \
echo "You need to do cvs update -d not just cvs update"
; \
fi
( cd $(DESTDIR)$(ASTVARLIBDIR)/sounds ; ln -s
$(ASTSPOOLDIR)/voicemail . )
if [ -f mpg123-0.59r/mpg123 ]; then $(MAKE) -C
mpg123-0.59r install; fi
@echo " +---- Asterisk Installation Complete -------+"
@echo " + +"
@echo " + YOU MUST READ THE SECURITY DOCUMENT +"
@echo " + +"
@echo " + Asterisk has successfully been installed. +"
@echo " + If you would like to install the sample +"
@echo " + configuration files (overwriting any +"
@echo " + existing config files), run: +"
@echo " + +"
@echo " + $(MAKE) samples +"
@echo " + +"
@echo " +----------------- or ---------------------+"
@echo " + +"
@echo " + You can go ahead and install the asterisk +"
@echo " + program documentation now or later run: +"
@echo " + +"
@echo " + $(MAKE) progdocs +"
@echo " + +"
@echo " + **Note** This requires that you have +"
@echo " + doxygen installed on your local system +"
@echo " +-------------------------------------------+"
@$(MAKE) -s oldmodcheck
NEWMODS=$(notdir $(wildcard */*.so))
OLDMODS=$(filter-out $(NEWMODS),$(notdir $(wildcard
$(DESTDIR)$(MODULES_DIR)/*.so)))
oldmodcheck:
@if [ -n "$(OLDMODS)" ]; then \
echo " WARNING WARNING WARNING" ;\
echo "" ;\
echo " Your Asterisk modules directory, located at" ;\
echo " $(DESTDIR)$(MODULES_DIR)" ;\
echo " contains modules that were not installed by this
" ;\
echo " version of Asterisk. Please ensure that these" ;\
echo " modules are compatible with this version before"
;\
echo " attempting to run Asterisk." ;\
echo "" ;\
for f in $(OLDMODS); do \
echo " $$f" ;\
done ;\
echo "" ;\
echo " WARNING WARNING WARNING" ;\
fi
install: all datafiles bininstall
@if [ -x /usr/sbin/asterisk-post-install ]; then \
/usr/sbin/asterisk-post-install $(DESTDIR) . ; \
fi
upgrade: all bininstall
adsi:
mkdir -p $(DESTDIR)$(ASTETCDIR)
for x in configs/*.adsi; do \
if [ ! -f $(DESTDIR)$(ASTETCDIRX)/$$x ]; then \
$(INSTALL) -m 644 $$x $(DESTDIR)$(ASTETCDIR)/`basename
$$x` ; \
fi ; \
done
samples: adsi
mkdir -p $(DESTDIR)$(ASTETCDIR)
for x in configs/*.sample; do \
if [ -f $(DESTDIR)$(ASTETCDIR)/`basename $$x .sample` ];
then \
if [ "$(OVERWRITE)" = "y" ]; then \
if cmp -s $(DESTDIR)$(ASTETCDIR)/`basename $$x
.sample` $$x ; then \
echo "Config file $$x is unchanged"; \
continue; \
fi ; \
mv -f $(DESTDIR)$(ASTETCDIR)/`basename $$x .sample`
$(DESTDIR)$(ASTETCDIR)/`basename $$x .sample`.old ; \
else \
echo "Skipping config file $$x"; \
continue; \
fi ;\
fi ; \
$(INSTALL) -m 644 $$x $(DESTDIR)$(ASTETCDIR)/`basename
$$x .sample` ;\
done
if [ "$(OVERWRITE)" = "y" ] || [ ! -f
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ]; then \
echo "[directories]" >
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astetcdir => $(ASTETCDIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astmoddir => $(MODULES_DIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astvarlibdir => $(ASTVARLIBDIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astagidir => $(AGI_DIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astspooldir => $(ASTSPOOLDIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astrundir => $(ASTVARRUNDIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "astlogdir => $(ASTLOGDIR)" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "" >> $(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo "; Changing the following lines may compromise your
security." >> $(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo ";[files]" >> $(DESTDIR)$(ASTETCDIR)/asterisk.conf
; \
echo ";astctlpermissions = 0660" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo ";astctlowner = root" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo ";astctlgroup = apache" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
echo ";astctl = asterisk.ctl" >>
$(DESTDIR)$(ASTETCDIR)/asterisk.conf ; \
else \
echo "Skipping asterisk.conf creation"; \
fi
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/sounds ; \
for x in sounds/demo-*; do \
if $(GREP) -q "^%`basename $$x`%" sounds.txt; then \
$(INSTALL) -m 644 $$x $(DESTDIR)$(ASTVARLIBDIR)/sounds
; \
else \
echo "No description for $$x"; \
exit 1; \
fi; \
done
mkdir -p $(DESTDIR)$(ASTVARLIBDIR)/mohmp3 ; \
for x in sounds/*.mp3; do \
$(INSTALL) -m 644 $$x $(DESTDIR)$(ASTVARLIBDIR)/mohmp3 ;
\
done
rm -f $(DESTDIR)$(ASTVARLIBDIR)/mohmp3/sample-hold.mp3
mkdir -p
$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX
:>
$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/unavail.gsm
for x in vm-theperson digits/1 digits/2 digits/3 digits/4
vm-isunavail; do \
cat $(DESTDIR)$(ASTVARLIBDIR)/sounds/$$x.gsm >>
$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/unavail.gsm
; \
done
:>
$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/busy.gsm
for x in vm-theperson digits/1 digits/2 digits/3 digits/4
vm-isonphone; do \
cat $(DESTDIR)$(ASTVARLIBDIR)/sounds/$$x.gsm >>
$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/busy.gsm ;
\
done
webvmail:
@[ -d $(DESTDIR)$(HTTP_DOCSDIR)/ ] || ( printf "http docs
directory not found.\nUpdate assignment of variable
HTTP_DOCSDIR in Makefile!\n" && exit 1 )
@[ -d $(DESTDIR)$(HTTP_CGIDIR) ] || ( printf "cgi-bin
directory not found.\nUpdate assignment of variable
HTTP_CGIDIR in Makefile!\n" && exit 1 )
$(INSTALL) -m 4755 -o root -g root
contrib/scripts/vmail.cgi
$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi
mkdir -p $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk
for x in images/*.gif; do \
$(INSTALL) -m 644 $$x
$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/; \
done
@echo " +--------- Asterisk Web Voicemail ----------+"
@echo " + +"
@echo " + Asterisk Web Voicemail is installed in +"
@echo " + your cgi-bin directory: +"
@echo " + $(DESTDIR)$(HTTP_CGIDIR)"
@echo " + IT USES A SETUID ROOT PERL SCRIPT, SO +"
@echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT! +"
@echo " + +"
@echo " + Other static items have been stored in: +"
@echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
@echo " + +"
@echo " + If these paths do not match your httpd +"
@echo " + installation, correct the definitions +"
@echo " + in your Makefile of HTTP_CGIDIR and +"
@echo " + HTTP_DOCSDIR +"
@echo " + +"
@echo " +-------------------------------------------+"
spec:
sed "s/^Version:.*/Version: $(RPMVERSION)/g"
redhat/asterisk.spec > asterisk.spec ; \
rpm: __rpm
__rpm: include/asterisk/version.h spec
rm -rf /tmp/asterisk ; \
mkdir -p /tmp/asterisk/redhat/RPMS/i386 ; \
$(MAKE) DESTDIR=/tmp/asterisk install ; \
$(MAKE) DESTDIR=/tmp/asterisk samples ; \
mkdir -p /tmp/asterisk/etc/rc.d/init.d ; \
cp -f redhat/asterisk /tmp/asterisk/etc/rc.d/init.d/ ; \
rpmbuild --rcfile /usr/lib/rpm/rpmrc:redhat/rpmrc -bb
asterisk.spec
progdocs:
doxygen contrib/asterisk-ng-doxygen
mpg123:
@wget -V >/dev/null || (echo "You need wget" ; false )
[ -f mpg123-0.59r.tar.gz ] || wget
http://www.mpg123.de/mpg123/mpg123-0.59r.tar.gz
[ -d mpg123-0.59r ] || tar xfz mpg123-0.59r.tar.gz
$(MAKE) -C mpg123-0.59r $(MPG123TARG)
config:
if [ -d /etc/rc.d/init.d ]; then \
$(INSTALL) -m 755 contrib/init.d/rc.redhat.asterisk
/etc/rc.d/init.d/asterisk; \
/sbin/chkconfig --add asterisk; \
elif [ -d /etc/init.d ]; then \
$(INSTALL) -m 755 init.asterisk /etc/init.d/asterisk; \
fi
dont-optimize:
$(MAKE) OPTIMIZE= K6OPT= install
valgrind: dont-optimize
depend: include/asterisk/build.h
include/asterisk/version.h .depend defaults.h
for x in $(SUBDIRS); do $(MAKE) -C $$x depend || exit 1 ;
done
.depend: include/asterisk/version.h
build_tools/mkdep ${CFLAGS} $(wildcard *.c)
.tags-depend:
@echo -n ".tags-depend: " > $@
@find . -maxdepth 1 -name \*.c -printf "\t%p \\\\\n" >>
$@
@find . -maxdepth 1 -name \*.h -printf "\t%p \\\\\n" >>
$@
@find ${SUBDIRS} -name \*.c -printf "\t%p \\\\\n" >> $@
@find ${SUBDIRS} -name \*.h -printf "\t%p \\\\\n" >> $@
@find include -name \*.h -printf "\t%p \\\\\n" >> $@
@echo >> $@
.tags-sources:
@rm -f $@
@find . -maxdepth 1 -name \*.c -print >> $@
@find . -maxdepth 1 -name \*.h -print >> $@
@find ${SUBDIRS} -name \*.c -print >> $@
@find ${SUBDIRS} -name \*.h -print >> $@
@find include -name \*.h -print >> $@
tags: .tags-depend .tags-sources
ctags -L .tags-sources -o $@
ctags: tags
TAGS: .tags-depend .tags-sources
etags -o $@ `cat .tags-sources`
etags: TAGS
FORCE:
%_env:
$(MAKE) -C $(shell echo $@ | sed "s/_env//g") env
env:
env
# If the cleancount has been changed, force a make clean.
# .cleancount is the global clean count, and .lastclean is
the
# last clean count we had
# We can avoid this by making noclean
cleantest:
if cmp -s .cleancount .lastclean ; then echo ; else \
$(MAKE) clean; cp -f .cleancount .lastclean;\
fi
patchlist:
@echo "Experimental Patches:"
@for x in patches/*; do \
patch=`basename $$x`; \
if [ "$$patch" = "CVS" ]; then \
continue; \
fi; \
if grep -q ^$$patch$$ patches/.applied; then \
echo "$$patch (applied)"; \
else \
echo "$$patch (available)"; \
fi; \
done
apply:
@if [ -z "$(PATCH)" ]; then \
echo "Usage: make PATCH=<patchname> apply"; \
elif grep -q ^$(PATCH)$$ patches/.applied 2>/dev/null;
then \
echo "Patch $(PATCH) is already applied"; \
elif [ -f "patches/$(PATCH)" ]; then \
echo "Applying patch $(PATCH)"; \
patch -p0 < patches/$(PATCH); \
echo "$(PATCH)" >> patches/.applied; \
else \
echo "No such patch $(PATCH) in patches directory"; \
fi
unapply:
@if [ -z "$(PATCH)" ]; then \
echo "Usage: make PATCH=<patchname> unapply"; \
elif grep -v -q ^$(PATCH)$$ patches/.applied 2>/dev/null;
then \
echo "Patch $(PATCH) is not applied"; \
elif [ -f "patches/$(PATCH)" ]; then \
echo "Un-applying patch $(PATCH)"; \
patch -p0 -R < patches/$(PATCH); \
rm -f patches/.tmpapplied || :; \
mv patches/.applied patches/.tmpapplied; \
cat patches/.tmpapplied | grep -v ^$(PATCH)$$ >
patches/.applied; \
rm -f patches/.tmpapplied; \
else \
echo "No such patch $(PATCH) in patches directory"; \
fi
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- Noob with simple question about FORCE: (long),
Robert Webb <=