[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: glpk problem,please check code
From: |
Ben Abbott |
Subject: |
Re: glpk problem,please check code |
Date: |
Sun, 12 Feb 2017 15:43:54 -0500 |
> On Feb 12, 2017, at 12:46 PM, saiko7 <address@hidden> wrote:
>
> i am posting the transpose of matrix 'a' ,since it will be easier to view
>
> a'=
>
> -1.35981 1.19186 -1.35835 -0.96627
> -0.07278 0.26615 -1.34016 -0.18523
> 2.53635 0.16648 1.77321 1.79299
> 1.37816 0.44815 0.37978 -0.86329
> -0.33832 0.06002 -0.50320 -0.01031
> 0.46239 -0.08236 1.80050 1.24720
> 0.23960 -0.07880 0.79146 0.23761
> 0.09870 0.08510 0.24768 0.37744
> 0.36379 -0.25543 -1.51465 -1.38702
> 0.09079 -0.16697 0.20764 -0.05495
> -0.55160 1.61273 0.62450 -0.22649
> -0.61780 1.06524 0.06608 0.17823
> -0.99139 0.48910 0.71729 0.50776
> -0.31117 -0.14377 -0.16595 -0.28792
> 1.46818 0.63556 2.34586 -0.63142
> -0.47040 0.46392 -2.89008 -1.05965
> 0.20797 -0.11480 1.10997 -0.68409
> 0.02579 -0.18336 -0.12136 1.96578
> 0.40399 -0.14578 -2.26186 -1.23262
> 0.25141 -0.06908 0.52498 -0.20804
> -0.01831 -0.22578 0.24800 -0.10830
> 0.27784 -0.63867 0.77168 0.00527
> -0.11047 0.10129 0.90941 -0.19032
> 0.06693 -0.33985 -0.68928 -1.17558
> 0.12854 0.16717 -0.32764 0.64738
> -0.18911 0.12589 -0.13910 -0.22193
> 0.13356 -0.00898 -0.05535 0.06272
> -0.02105 0.01472 -0.05975 0.06146
> 149.62000 2.69000 378.66000 123.50000
> 0.00000 0.00000 0.00000 0.00000
> As you can see a is a 4*30 matrix(hence the data i posted is 30*4)
> I am using octave 4.0.2 on windows 7
I can confirm your scirpt gives the error, but don’t know if the syntax is
correct. The problem I’m looking at is unrelated.
Ben
- glpk problem,please check code, saiko7, 2017/02/12
- Re: glpk problem,please check code, Ben Abbott, 2017/02/12
- Re: glpk problem,please check code, saiko7, 2017/02/12
- Re: glpk problem,please check code,
Ben Abbott <=
- Re: glpk problem,please check code, saiko7, 2017/02/12
- Re: glpk problem,please check code, Ben Abbott, 2017/02/12
- Re: glpk problem,please check code, siko1056, 2017/02/13
- Re: glpk problem,please check code, Ben Abbott, 2017/02/13
- Re: glpk problem,please check code, saiko7, 2017/02/14