Re: error: A BLAS library was detected but found incompatible with your Fortran 77

[crume]

hi
ok thanks
./configure  --enable-shared --prefix=$INSTALL_SUB_DIR  --disable-docs  
--with-blas=/work/logiciels/rh7/lapack/3.6.1/lib/libblas.so  
--with-lapack=/work/logiciels/rh7/lapack/3.6.1/lib/liblapack.so
make
make install

now all is ok
but when i launch octave y have this errors :


address@hidden bin\RH7 $./octave-4.2.0
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctgui.so.2)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctgui.so.2)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctgui.so.2)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctinterp.so.4)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctinterp.so.4)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctinterp.so.4)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.8' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctave.so.4)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctave.so.4)
/work/logiciels/rh7/octave/4.2.0/libexec/octave/4.2.0/exec/x86_64-pc-linux-gnu/octave-gui:
 /usr/lib64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by  
/work/logiciels/rh7/octave/4.2.0/lib/octave/4.2.0/liboctave.so.4)
address@hidden bin\RH7 $ldd octave-4.2.0
         linux-vdso.so.1 =>  (0x00007ffda47c9000)
         libX11.so.6 => /lib64/libX11.so.6 (0x00007f8d891f7000)
         libutil.so.1 => /lib64/libutil.so.1 (0x00007f8d88ff3000)
         libstdc++.so.6 =>  
/work/logiciels/rh7/gcc/6.3.0/lib64/libstdc++.so.6 (0x00007f8d88c72000)
         libm.so.6 => /lib64/libm.so.6 (0x00007f8d88970000)
         libgomp.so.1 =>  
/work/logiciels/rh7/gcc/6.3.0/lib64/libgomp.so.1 (0x00007f8d88742000)
         libgcc_s.so.1 =>  
/work/logiciels/rh7/gcc/6.3.0/lib64/libgcc_s.so.1 (0x00007f8d8852b000)
         libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f8d8830f000)
         libc.so.6 => /lib64/libc.so.6 (0x00007f8d87f4c000)
         libxcb.so.1 => /lib64/libxcb.so.1 (0x00007f8d87d2a000)
         libdl.so.2 => /lib64/libdl.so.2 (0x00007f8d87b26000)
         /lib64/ld-linux-x86-64.so.2 (0x00007f8d8955e000)
         libXau.so.6 => /lib64/libXau.so.6 (0x00007f8d87921000)
address@hidden bin\RH7 $ldd octave-4.2.0 | grep libstdc++.so.6
         libstdc++.so.6 =>  
/work/logiciels/rh7/gcc/6.3.0/lib64/libstdc++.so.6 (0x00007fd662c37000)



"tmacchant [via Octave]" <address@hidden> a écrit :

> ----- Original Message -----
>
>> From: crume 
>
>> To: address@hidden
>> Cc:
>> Date: 2017/3/10, Fri 17:43
>> Subject: Re: error: A BLAS library was detected but found  
>> incompatible with your Fortran 77
>>
>> hi
>> i have try
>> with and without export FFLAGS='-ff2c'
>>
>> it's the same behaviour
>>
>> best regards
>>
>
>
>>> If possible, can you upload config.log (Of course, It is better to  
>>> be compressed) to Nabble.
>>> config.log give us more information.
>
>
>
> How about config.log? Did you see it?
> config.log exists in your build directory
>
> Tatsuro
>
> _______________________________________________
> Help-octave mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/help-octave
>
>
>
>
> _______________________________________________
> If you reply to this email, your message will be added to the  
> discussion below:
> http://octave.1599824.n4.nabble.com/error-A-BLAS-library-was-detected-but-found-incompatible-with-your-Fortran-77-tp4682249p4682277.html
>
> To unsubscribe from error: A BLAS library was detected but found  
> incompatible with your Fortran 77, visit  
> http://octave.1599824.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=4682249&code=cGllcnJlLmNydW1leXJvbGxlQGMtcy5mcnw0NjgyMjQ5fC0xNDUxMTYxMDUz






--
View this message in context: 
http://octave.1599824.n4.nabble.com/error-A-BLAS-library-was-detected-but-found-incompatible-with-your-Fortran-77-tp4682249p4682283.html
Sent from the Octave - General mailing list archive at Nabble.com.