Re: matrix plot how to?

[Marco Atzeri]

Am 08.01.2019 um 02:11 schrieb eugenia:
> Dear all,
> I have octave 4.2.2 running under Fedora.
>
> I want to visualize a 2x6x6067 matrix. It has the following aspect:
>
> > > CHIS1=ncread(fullfile(obsX, 'ChannelInfo_bS.nc'),'ChanAmpPhase')
> CHIS1 =
>
> ans(:,:,1) =
>
>     3.3208e-04   3.6136e-04   3.4397e-04   3.2282e-04   3.0488e-04
> 3.5576e-04
>     7.6304e+01   7.5384e+01   7.6021e+01   8.0571e+01   8.1593e+01
> 7.1823e+01
>
> ans(:,:,2) =
>
>     7.8157e-04   6.4418e-04   6.8477e-04   5.5001e-04   4.8390e-04
> 4.0325e-04
>     7.6915e+01   8.1935e+01   8.8335e+01   7.9364e+01   8.6596e+01
> 7.3393e+01
>
> ans(:,:,3) =
>
>     0.00039   0.00025   0.00046   0.00040   0.00039   0.00000
>     0.03458   0.07222   0.08307  -0.23317   0.26613   0.00000
> .
> .
> .
> ans(:,:,6066) =
>
>     3.8324e-04   3.4421e-04   3.7266e-04   3.9962e-04   2.6922e-04
> 2.5487e-04
>     1.1616e+02   1.1836e+02   1.0435e+02   1.1913e+02   1.1451e+02
> 1.1473e+02
>
> ans(:,:,6067) =
>
>     1.9845e-04   2.3307e-04   2.0106e-04   1.9758e-04   3.2063e-04
> 2.7223e-04
>     9.2338e+01   8.5952e+01   5.7616e+01   6.9950e+01   6.7347e+01
> 9.6147e+01
>
> > >
>
> I tried with scatter3, plot3 and surf but I do not know if they are the
> convenient instructions or if I wrote them well because I am new in Octave.
> I have no problems to plot 2D, but it is not a good idea.

How you want to plot them ?

You have 3 indexes and 1 value.
In a 3D drawing you have usually 2 indexes as X,Y and 1 Z value.
You have one index too much.



> Thanks in advance,
> Maria Eugenia
>
>
>
>
> --
> Sent from: http://octave.1599824.n4.nabble.com/Octave-General-f1599825.html

---
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus