RE: [Linphone-users] URGENT help

[Karthikeyan S]

Thanks,
I downloaded the latest driver code alsa-driver-0.9.0rc1 from ALSA.
I configured and compiled the code. However when i try to issue command

/sbin/modprobe snd-ac97-codec
i got the following error

/lib/modules/2.4.2-2/kernel/sound/acore/snd.o: unresolved symbol vsnprintf
/lib/modules/2.4.2-2/kernel/sound/acore/snd.o: insmod
/lib/modules/2.4.2-2/kernel/sound/acore/snd.o failed
/lib/modules/2.4.2-2/kernel/sound/acore/snd.o: insmod snd-ac97-codec failed

I think this is the problem for the unresolved symbol vsnprintf in my kernel
( probably that symbol is not exported).
In the INSTALL file they said the kernel has to be fully configured but
doesn't say anything if it doesn't what to do.

Can u pls tell me how to re-compile the kernel or to do appropriate steps to
make it work.

Will be grateful if u do so.
Thanx and regds
karthik


-----Original Message-----
From: Simon Morlat [mailto:address@hidden
Sent: Thursday,June 13, 2002 5:58 PM
To: address@hidden
Cc: linphone-users
Subject: Re: [Linphone-users] URGENT help


It is recommended to use alsa drivers (http://www.alsa-project.org) .
There are many problems with the intel ac97 driver of the linux kernel.
Do it, check that the snd-pcm-oss module is loaded, and then it will
work better. (I have intel ac97 also.)
Simon

Le jeu 13/06/2002 à 12:56, Karthikeyan S a écrit :
>
> ya i checked that now with the proper sipomatic, Unfortunately am not able
> to hear anything.
> It says the same -1 bytes written after it was connected. Am using ac'97
> intel sound card module.
> Pls provide me some directions. I used "sndconfig" to check the soundcard,
> the test is success.
> I also used "aumix" to increase the volume, but no use.
>
>
> Thanx and regds
> karthik
>
> Is it possible to use any other drivers for the same sound card?
> I think 0.8.0 is not interworking with 0.7.1, am not sure, will make sure
> that once and send u the report again. Mean while pls help me sound card
> related problem.
>
>
>
> -----Original Message-----
> From: Simon Morlat [mailto:address@hidden
> Sent: Thursday,June 13, 2002 12:55 PM
> To: address@hidden
> Cc: address@hidden
> Subject: RE: [Linphone-users] URGENT help
>
>
> Excuse me for the lo interface: you were right...
> I found the bug, it will be corrected in next release.
> However I noticed that the version of sipomatic used was not the one of
> linphone-0.8.0. The lastest sipomatic should answer those types of SDP
> messages:
>
> v=0
> o=robot 123456 654321 IN IP4 127.0.0.1
> s=A conversation
> c=IN IP4 127.0.0.1
> t=0 0
> m=audio 8888 RTP/AVP 0 8 3 115
> c=IN IP4 127.0.0.1
> a=rtpmap:pcmu/8000/1
> a=rtpmap:pcma/8000/1
> a=rtpmap:gsm/8000/1
> a=rtpmap:lpc10-15/8000/1
>
> Whereas your version of sipomatic answers sdp messages without a=rtpmap
> fields.
> Please verify that the sipomatic you are running is not the one of an
> older version.
> Thank you.
> Simon
>
>
***************************************************************************
> This message is proprietary to Future Software Limited (FSL)
> and is intended solely for the use of the individual to whom it
> is addressed. It may contain  privileged or confidential information
> and should not be circulated or used for any purpose other than for
> what it is intended.
>
> If you have received this message in error, please notify the
> originator immediately. If you are not the intended recipient,
> you are notified that you are strictly prohibited from using,
> copying, altering, or disclosing the contents of this message.
> FSL accepts no responsibility for loss or damage arising from
> the use of the information transmitted by this email including
> damage from virus.
>
***************************************************************************
>


***************************************************************************
This message is proprietary to Future Software Limited (FSL) 
and is intended solely for the use of the individual to whom it
is addressed. It may contain  privileged or confidential information 
and should not be circulated or used for any purpose other than for 
what it is intended. 

If you have received this message in error, please notify the
originator immediately. If you are not the intended recipient,
you are notified that you are strictly prohibited from using,
copying, altering, or disclosing the contents of this message. 
FSL accepts no responsibility for loss or damage arising from 
the use of the information transmitted by this email including
damage from virus.
***************************************************************************