[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-users] Linphone crash
From: |
Simon Morlat |
Subject: |
Re: [Linphone-users] Linphone crash |
Date: |
Tue, 02 Feb 2010 14:51:24 +0100 |
Hi Marcin,
I'm quite embarrassed because I'm unable to reproduce any crash under
the conditions you are describing with my Windows XP laptop.
Did you try with 3.2.1 instead of 3.2.0, just in case ?
Simon
Le mercredi 20 janvier 2010 à 09:47 +0100, iBMS - Marcin Wyrwas a
écrit :
> Hi
>
> It is also possible to replicate this bug using two Linphone clients.
> Just use the config given in previous post (H263-1998 + H264) on first client
> and on the other client use similar config but only leave H264 enabled.
> Then try to initiate connection from the one that has H263-1998 + H264 to the
> one with only H264.
>
> Best regards,
> Marcin Wyrwas
>
>
> Dnia Tue, 19 Jan 2010 17:06:47 +0100, iBMS - Marcin Wyrwas napisał(a):
>
> > Hi
> >
> > I have a crash to report.
> > Using Linphone 3.2.0 with msx264-1.3.0 plugin on Windows 7 32-bit (also
> > tested
> >
> > Windows XP - same results).
> > The crash manifests when attempting to initiate outgoing video call (with
> > attached linphonerc settings file) to 2N Helios IP video door phone
> >
> >
> > (http://www.2n.cz/products/door-lift-phones/door-entry-systems/ip-communication.html).
> >
> > This phone only supports H264 codec.
> > Incoming connections work correctly.
> >
> > Details:
> > It appears that it's these particular codecs selected (H263-1998 and H264)
> > triggering the crash.
> > Linphone doesn't crash if all possible codecs are enabled.
> >
> > ----------------------
> > linphonerc:
> >
> > [sound]
> > echocancelation=1
> > echolimiter=1
> >
> > [net]
> > download_bw=0
> > upload_bw=0
> > firewall_policy=0
> > mtu=0
> >
> > [sip]
> > sip_port=5060
> > guess_hostname=0
> > inc_timeout=600
> > use_info=0
> > use_ipv6=0
> > register_only_when_network_is_up=0
> > default_proxy=0
> >
> > [rtp]
> > audio_rtp_port=7078
> > video_rtp_port=9078
> > audio_jitt_comp=60
> > video_jitt_comp=60
> > nortp_timeout=5
> >
> > [audio_codec_0]
> > mime=speex
> > rate=16000
> > enabled=0
> >
> > [audio_codec_1]
> > mime=speex
> > rate=8000
> > enabled=0
> >
> > [audio_codec_2]
> > mime=PCMU
> > rate=8000
> > enabled=1
> >
> > [audio_codec_3]
> > mime=PCMA
> > rate=8000
> > enabled=1
> >
> > [audio_codec_4]
> > mime=GSM
> > rate=8000
> > enabled=0
> >
> > [video]
> > display=1
> > capture=1
> > show_local=1
> > size=cif
> >
> > [video_codec_0]
> > mime=H263
> > rate=90000
> > enabled=0
> > recv_fmtp=QCIF=2
> >
> > [video_codec_1]
> > mime=MP4V-ES
> > rate=90000
> > enabled=0
> > recv_fmtp=profile-level-id=3
> >
> > [video_codec_2]
> > mime=theora
> > rate=90000
> > enabled=0
> >
> > [video_codec_3]
> > mime=H263-1998
> > rate=90000
> > enabled=1
> > recv_fmtp=CIF=1;QCIF=1
> >
> > [video_codec_4]
> > mime=x-snow
> > rate=90000
> > enabled=0
> >
> > [video_codec_5]
> > mime=H264
> > rate=90000
> > enabled=1
> >
> > [video_codec_6]
> > mime=H264
> > rate=90000
> > enabled=0
> > recv_fmtp=packetization-mode=1
> >
> > [GtkUi]
> > uri0=sip:address@hidden:55004
> >
> > [auth_info_0]
> > username=401
> > passwd=ibms
> >
> > [proxy_0]
> > reg_proxy=sip:192.168.0.167:55004
> > reg_identity=sip:address@hidden:55004
> > reg_expires=3600
> > reg_sendregister=1
> > publish=0
> >
> >
> >
> > ----------------------
> > linphone-3.exe caused an Access Violation at location 77339b60 in module
> > msvcrt.dll Writing to location 04564000.
> >
> > Registers:
> > eax=0453972d ebx=0455f300 ecx=3fffecb8 edx=00000001 esi=0453e44c
> > edi=04564000
> > eip=77339b60 esp=0440fc00 ebp=0440fc08 iopl=0 nv up ei pl nz na po
> > nc
> > cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000
> > efl=00010206
> >
> > Call stack:
> > 77339B60 msvcrt.dll:77339B60 memcpy
> > 6B34189A libortp-8.dll:6B34189A msgpullup
> > 65F94783 libmediastreamer-0.dll:65F94783 dec_process_frame videodec.c:261
> >
> > 65F94B19 libmediastreamer-0.dll:65F94B19 ms_queue_get msqueue.h:42
> >
> > 65F82A4C libmediastreamer-0.dll:65F82A4C call_process msticker.c:179
> >
> > 65F82AD3 libmediastreamer-0.dll:65F82AD3 run_graph msticker.c:197
> >
> > 65F82B10 libmediastreamer-0.dll:65F82B10 run_graphs msticker.c:210
> >
> > 65F82C03 libmediastreamer-0.dll:65F82C03 ms_ticker_run msticker.c:326
> >
> > 6B341F8C libortp-8.dll:6B341F8C WIN_mutex_destroy
> > 77341287 msvcrt.dll:77341287 _itow_s
> > 77341328 msvcrt.dll:77341328 _endthreadex
> > 77481174 kernel32.dll:77481174 BaseThreadInitThunk
> > 77CDB3F5 ntdll.dll:77CDB3F5 RtlInitializeExceptionChain
> > 77CDB3C8 ntdll.dll:77CDB3C8 RtlInitializeExceptionChain
> > ----------------------
> >
> > Best regards,
> > Marcin Wyrwas
> >
> >
> >
> >
> >
> > _______________________________________________
> > Linphone-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/linphone-users
>
> _______________________________________________
> Linphone-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/linphone-users
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Linphone-users] Linphone crash,
Simon Morlat <=