linphone-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linphone-users] Re: [Linphone-developers] How to enable video while Aud


From: Venu Vemulapally
Subject: [Linphone-users] Re: [Linphone-developers] How to enable video while Audio call is going on...
Date: Thu, 8 Apr 2010 03:21:06 -0700

Hi Simon,
   Thanks for your suggestion after reinstallation of the msx264-1.3.2 it is working fine.

Thanks,
Venu

On 7 April 2010 01:50, Simon Morlat <address@hidden> wrote:
I think the pc that is not working is using a wrong version of msx264.
Make sure that msx264-1.3.2 is installed on this pc, at the right place.
You should have a libmsx264.so at /usr/local/lib/mediastreamer/plugins
or /usr/lib/mediastreamer/plugins.

Simon

Le mercredi 07 avril 2010 à 00:40 -0700, Venu Vemulapally a écrit :
> Hi Simon,
>     I have ran the command as you mentioned below then I observed that
> in one Linphone PC it is running properly and showing the video but in
> another PC it is running but not showing the video and the log of not
> working PC is attached with this mail.
>
> I have tried with older version of msx264 but same issue is coming.
>
>
> Thanks,
> Anil.V
>
> On 6 April 2010 13:41, Simon Morlat <address@hidden> wrote:
>         Are you sure both linphones have the msx264-1.3.2 ?
>         Can you run this local test on both pcs (from linphone source
>         tree):
>         ./mediastreamer2/test/mediastream --local 8000 --remote
>         127.0.0.1:8000
>         --payload 102
>
>         This will capture video, encode, send as RTP, recv RTP, decode
>         and
>         display. And please tell me if it works, on each PC.
>
>         Simon
>
>         Le mardi 06 avril 2010 à 12:40 -0700, Venu Vemulapally a
>         écrit :
>
>         > Hi Simon,
>         >    Yes two linphones are calling each other. I have used
>         latest
>         > X264 ,ffmpeg and msx264.  While calling between two
>         linphones i have
>         > enabled video .
>         >
>         > My Hardware configuration is 1GHZ Intel processor and 512MB
>         RAM
>         >
>         > Please let me know if you need any further info.
>         >
>         > Thanks,
>         > Venu
>         >
>         > On 6 April 2010 05:26, Simon Morlat
>         <address@hidden> wrote:
>         >         Hi Venu,
>         >
>         >         What is this test doing exactly ? Two linphone
>         calling each
>         >         other ?
>         >         The logs make me think that the remote linphone is
>         compiled
>         >         with
>         >         msx264-1.3.1 on top of recent x264.
>         >         Can you tell more ?
>         >
>         >         Simon
>         >
>         >
>         >         Le lundi 05 avril 2010 à 15:07 -0700, Venu
>         Vemulapally a
>         >         écrit :
>         >
>         >         > Hi Simon,
>         >         >    While video call is going on linphone is
>         crashing and the
>         >         console
>         >         > is showing error messages from the h264 decoder
>         level. I
>         >         have
>         >         > installed the latest ffmpeg and x264  which are
>         fetched from
>         >         SVN.
>         >         > I have installed latest msx264-1.3.2.tar.gz plugin
>         >         > The console log can be downloaded from
>         >         >
>         >
>         https://sites.google.com/site/venuvemulapallyproject/have-a-fun/h264_issues.txt
>         >         >
>         >         > Thanks,
>         >         > Venu
>         >         >
>         >         > On 2 April 2010 02:19, Simon Morlat
>         >         <address@hidden> wrote:
>         >         >         Hi,
>         >         >
>         >         >         Enabling video during calls is a very
>         useful
>         >         feature, but
>         >         >         unfortunately
>         >         >         it not (yet) implemented.
>         >         >
>         >         >         Simon
>         >         >
>         >         >         Le lundi 29 mars 2010 à 01:12 -0700, Venu
>         >         Vemulapally a
>         >         >         écrit :
>         >         >
>         >         >         > Hi All,
>         >         >         >
>         >         >         >     I am using Linphone-3.2.1 with
>         linphone i have
>         >         observed
>         >         >         that when
>         >         >         > we want to do video calls from one PC to
>         anthother
>         >         PC the
>         >         >         source PC
>         >         >         > should be enabled in video mode then
>         only future
>         >         calls is
>         >         >         accepting
>         >         >         > video from destination PC. Could you
>         please
>         >         suggest me can't
>         >         >         we enable
>         >         >         > video dynamically  while audio call is
>         going on ?
>         >         >         >
>         >         >         >
>         >         >         > Thanks
>         >         >
>         >         >         >
>         _______________________________________________
>         >         >         > Linphone-developers mailing list
>         >         >         > address@hidden
>         >         >         >
>         >
>         http://lists.nongnu.org/mailman/listinfo/linphone-developers
>         >         >
>         >         >
>         >         >
>         >
>         >
>         >
>         >
>         >
>
>
>
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]