Re: [Linphone-users] Crash after call answered

[Simon Morlat]

Hi ,

"settcp opt failed" is not a debug message from linphone, nor exosip,
nor osip. I suppose this comes from the libc or other system library.
Getting a gdb backtrace would definitely help you to find what's the
root cause of this.

Simon

Le mardi 12 avril 2011 à 14:34 +0200, Stefano Cordibella a écrit :
> Hello,
>      we have updated our asterisk machine equipped with linhpone to an 
> open embedded distribution.
> We are using linphone 3.4.3 the machine is well configured and we can 
> emit calls, but when we try to answer a call or when a remote user 
> answer a call the linhpone crash.
> The last messages are:
> 
> ortp-message-CALL_ANSWERED
> 
> ortp-message-Found payload PCMA/8000 fmtp=
> ortp-message-Found payload telephone-event/8000 fmtp=0-16settcp opt failed
> ortp-message-Doing SDP offer/answer process
> ortp-message-Processing for stream 0
> ortp-message-DNS resolution with 127.0.0.1:5060
> ortp-message-getaddrinfo returned the following addresses:
> ortp-message-127.0.0.1 port 5060
> ortp-message-Message sent: (to dest=127.0.0.1:5060)
> ACK sip:address@hidden SIP/2.0
> Via: SIP/2.0/UDP 157.27.238.84:5061;rport;branch=z9hG4bK1396075546
> From: <sip:address@hidden>;tag=1588801693
> To: <sip:address@hidden>;tag=as612c3883
> Call-ID: 981703293
> CSeq: 21 ACK
> Contact: <sip:address@hidden:5061>
> Proxy-Authorization: Digest username="CTM022_1", realm="asterisk", 
> nonce="0e1bb6a0", uri="sip:address@hidden", 
> response="2c7b83a4428e99e6db72bd190dbc320e", algorithm=MD5
> Max-Forwards: 70
> User-Agent: Linphone/3.4.3 (eXosip2/3.3.0)
> Content-Length: 0
> 
> 
> ortp-message-Call 0x80a65a0: moving from state 
> LinphoneCallOutgoingRinging to LinphoneCallConnected
> Call 1 with <sip:address@hidden> connected.
> ortp-message-ms_filter_unlink: 
> MSFilePlayer:0x809f538,0-->MSDtmfGen:0x80a0548,0
> ortp-message-ms_filter_unlink: 
> MSDtmfGen:0x80a0548,0-->MSAlsaWrite:0x80a0768,0
> ortp-message-Audio (ring) MSTicker thread exiting
> ortp-message-Audio bandwidth for this call is 80
> settcp opt failed
> : Bad file descriptor
> 
> Any idea of the last message (error) "settcp opt failed" ?
> 
> Thanks in advance,
> Stefano.
>