[Linphone-users] Linephone - nox is not Firewall traversal

[patrick295767 patrick295767]

Hi,

It states here:

Q: Does linphone work behind firewalls ? What are the ports used ?

• A: Yes it works in most cases. The simplest way to achieve this is to active STUN support from the configuration box. You 'll need to enter the name of a STUN server, for example stunserver.org. If your firewall or gateway does UDP masquerading, it should work without problem.
  You may want to restrict the open ports on the firewall: you need at least to preserve the SIP port (udp/5060), the audio rtp port (udp/7078) and the video rtp port (udp/9078). All those ports are configurable from linphone, but keeping 5060 for SIP is highly recommended.
• Customising audio and video ports is recommended when using several linphone behind a same NAT so that they don't share same port numbers on the NAT. They must be even numbers.

My config is : 

[sound]

playback_dev_id=ALSA: VOIP USB Phone

ringer_dev_id=ALSA: VOIP USB Phone

capture_dev_id=ALSA: USB Device 0x46d:0x821

remote_ring=/usr/share/sounds/linphone/rings/oldphone.wav

local_ring=/usr/loca/share/sounds/linphone/rings/oldphone.wav

echocancellation=1

ec_delay=0

ec_tail_len=60

ec_frame_size=128

mic_gain=1.0

playback_gain_db=0.0

[video]

size=cif

enabled=0

display=0

capture=0

show_local=0

self_view=1

device=V4L2: /dev/video0

[net]

download_bw=1024

upload_bw=1024

firewall_policy=2

mtu=0

#STUN=2

stun_server=stun.ekiga.net

#Firewall=1

#nat_address=80.112.33.11

[sip]

sip_port=5060

guess_hostname=1

contact=sip:address@hidden

inc_timeout=15

use_info=0

use_rfc2833=0

use_ipv6=0

register_only_when_network_is_up=1

default_proxy=-1

keepalive_period=10

>

ping_with_options=1

auto_net_state_mon=1

[rtp]

audio_rtp_port=7078

video_rtp_port=9078

audio_jitt_comp=60

video_jitt_comp=0

nortp_timeout=30

[audio_codec_0]

mime=speex

rate=32000

enabled=1

recv_fmtp=vad=on

[video_codec_0]

mime=MP4V-ES

rate=90000

enabled=1

recv_fmtp=profile-level-id=3

[friend_0]

url="">

pol=accept

subscribe=1

[audio_codec_1]

mime=speex

rate=16000

enabled=1

[audio_codec_2]

mime=speex

rate=8000

enabled=1

[audio_codec_3]

mime=GSM

rate=8000

enabled=1

[audio_codec_4]

mime=PCMU

rate=8000

enabled=1

[audio_codec_5]

mime=PCMA

rate=8000

enabled=1

[video_codec_1]

mime=theora

rate=90000

enabled=1

[video_codec_2]

mime=H263-1998

rate=90000

enabled=1

recv_fmtp=CIF=1;QCIF=1

[video_codec_3]

mime=H263

rate=90000

enabled=1

[video_codec_4]

mime=x-snow

rate=90000

enabled=1

[proxy_0]

reg_proxy=sip:ekiga.net

reg_identity=sip:address@hidden

reg_expires=3600

reg_sendregister=1

publish=0

dial_escape_plus=0

[auth_info_0]

username=MYUSERNAME

userid=MYUSERNAME

passwd=XXXXXXXXXXXXXXXXXXXXX

realm="ekiga.net"

 

So the stun.ekiga.at does not work

If I do try to call linephoner from a voip phone it does not work to 

sip:address@hidden

but it works onto  : 

sip:address@hidden  (<<--- on the intranet)

by the way can we use WAV or MP3 for codec of the sound ?

Thus bug, !!   Linephoner is not Firewall traversal

5060 is not open. 

Anyhow ekiga and skype work well with my firewall but linephoner absolutely not

msg are even not working from the world , i.e. outside my intranet !!

I hope that a developer can help me 

I sniff, detect a big bug here ...

thank you

Sincerely