[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linphone-users] LinPhone & CME
From: |
BlastXng |
Subject: |
[Linphone-users] LinPhone & CME |
Date: |
Wed, 30 Jan 2013 12:50:41 -0800 |
User-agent: |
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:17.0) Gecko/20130107 Thunderbird/17.0.2 |
Hello Folks
I am presently working on getting LinPhone to connect to Cisco Call
Manager Express 9.X and presently have had no success.
According to Cisco, it needs to see the following when LinPhone (Windows
or Linux) attempts to register to the system.
Linphone sends a register message with a dn (Directory Number) that
matches one built/configured on the cme, then the cme will send a sip
401 Unauthorized message. At this point the linphone should send a
second register message with its username and password. If these
credentials match the CME config the cme will send a 200 ok message and
the LinPhone would be able to register..
Unfortunately this isn't happening.. Apparently there doesn't appear to
be a way to send the first register message with the DN in it to the
CME. I have tried this many times and have no success. Below is a
snippet of configuration from the LinPhoneRc file..
[sip]
media_encryption=none
default_proxy=0
guess_hostname=1
contact=<sip:address@hidden>
inc_timeout=15
use_info=0
use_rfc2833=0
use_ipv6=0
register_only_when_network_is_up=1
[proxy_0]
reg_proxy=sip:172.21.132.2
reg_route=sip:172.21.132.2
reg_identity=sip:address@hidden
reg_expires=3600
reg_sendregister=1
publish=0
dial_escape_plus=0
[auth_info_0]
address@hidden
address@hidden
passwd=123456
realm="cmereg.local"
Below is a snippet of CME Configuration
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface Loopback0
bind media source-interface Loopback0
registrar server
localhost dns:esrpd2.cmereg.local
no update-callerid
!
voice class codec 1
codec preference 1 g711ulaw
!
!
voice register global
mode cme
source-address 172.21.132.2 port 5060
max-dn 5
max-pool 5
authenticate register
authenticate realm cmereg.local
tftp-path flash:
create profile sync 0001409823080218
!
voice register dn 1
number 3711200
!
voice register dn 2
number 3711201
!
voice register template 1
!
voice register template 2
!
voice register pool 1
id mac 5C26.0A60.681A
number 1 1
template 1
voice-class codec 1
username blast password 123456
after-hour exempt
!
!
So my question is, has anyone every gotten LinPhone to work with Cisco
Call Manager Express?
Appreciate the help!
Cheers
BB
- [Linphone-users] LinPhone & CME,
BlastXng <=