Re: [Linphone-users] video on raspberry

[Sylvain Berfini]

Hi Wlady,

I managed to get the camera working by loading the module bcm2835-uv4l 
manually (then I added it to /etc/modules for the system to do it itself 
at the boot).
I also installed the package uv4l-raspicam-extras for the /dev/video0 to 
be also created at boot (I didn't changed the script it uses).
If it still doesn't work, check your pi is updated to latest version 
(rpi-update) and you have the latest v4l2 driver.
By the way, I also use the LD_PRELOAD hack...

At the end, it's a bit laggy (I'll try to tweak my config a bit), but 
nevertheless I manage to receive video from the pi (both with linphone 
when using desktop mode and with linphonec in console only).

Best regards.

---
Sylvain Berfini
Software Engineer @ Belledonne Communications

Le 2014-04-10 16:50, Wlady a écrit :
> Hello everyone,
>
> did anyone managed to make work the camera modulo with raspberry and
> linphone ?
> I've successfully compiled linphone 3.7.0, It does normal calls but
> not with video. I see flashing red led on camera modulo for a second
> and then I get error:
>
> ortp-error-no such method on filter MSV4L2Capture, fid=16390 method
> index=0
> ortp-error-no such method on filter MSX264Enc, fid=16392 method
> index=0
> ortp-error-/dev/video0 does not support streaming i/o
>
> ortp-error-/dev/video0 does not support streaming i/o
>
> ortp-error-/dev/video0 does not support streaming i/o
>
> I was able to remove last error (streaming i/o) with LD_PRELOAD but
> first two errors persist. Any help would be very appreciated, thanks
>
> wlady
>  !DSPAM:5346afc317281527120464!
> _______________________________________________
> Linphone-users mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/linphone-users
>
>
> !DSPAM:5346afc317281527120464!