Hi,
Linphone on Fedora 20 is not able to send REGISTER messages to the proxy server when using ipv6 over TCP. The following is the debug log from the phone. What am i doing wrong here. Any help is appreciated :)
About my setup : 3ffe::100 is my client, 2ffe::a66:b99b is my proxy server (OPENSIPs)
linphone-message : Using (r/w) config information from .linphonerc
linphone-message : Initializing LinphoneCore 3.6.1
linphone-message : srtp init
linphone-message : oRTP-0.22.0 initialized.
linphone-message : assigning PCMU/8000 payload type number 0
linphone-message : assigning GSM/8000 payload type number 3
linphone-message : assigning PCMA/8000 payload type number 8
linphone-message : assigning speex/8000 payload type number 110
linphone-message : assigning speex/16000 payload type number 111
linphone-message : assigning speex/32000 payload type number 112
linphone-message : assigning telephone-event/8000 payload type number 101
linphone-message : assigning G722/8000 payload type number 9
linphone-message : assigning GSM/11025 payload type number 96
linphone-message : assigning GSM/22050 payload type number 97
linphone-message : assigning H263/90000 payload type number 34
linphone-message : assigning theora/90000 payload type number 97
linphone-message : assigning H263-1998/90000 payload type number 98
linphone-message : assigning MP4V-ES/90000 payload type number 99
linphone-message : assigning H264/90000 payload type number 102
linphone-message : assigning VP8/90000 payload type number 103
linphone-message : assigning x-snow/90000 payload type number 100
linphone-message : assigning iLBC/8000 payload type number 104
linphone-message : assigning AMR/8000 payload type number 105
linphone-message : assigning AMR-WB/16000 payload type number 106
linphone-message : assigning 1015/8000 payload type number 107
linphone-message : assigning G726-16/8000 payload type number 108
linphone-message : assigning G726-24/8000 payload type number 109
linphone-message : assigning G726-32/8000 payload type number 113
linphone-message : assigning G726-40/8000 payload type number 114
linphone-message : assigning AAL2-G726-16/8000 payload type number 115
linphone-message : assigning AAL2-G726-24/8000 payload type number 116
linphone-message : assigning AAL2-G726-32/8000 payload type number 117
linphone-message : assigning AAL2-G726-40/8000 payload type number 118
linphone-message : assigning SILK/8000 payload type number 119
linphone-message : assigning SILK/12000 payload type number 120
linphone-message : assigning SILK/16000 payload type number 121
linphone-message : assigning SILK/24000 payload type number 122
linphone-message : assigning G729/8000 payload type number 18
linphone-message : assigning mpeg4-generic/22050 payload type number 123
linphone-message : assigning mpeg4-generic/44100 payload type number 124
linphone-message : assigning opus/48000 payload type number 125
linphone-message : assigning 1016/8000 payload type number 1
linphone-message : assigning GSM/8000 payload type number 3
linphone-message : assigning G723/8000 payload type number 4
linphone-message : assigning LPC/8000 payload type number 7
linphone-message : assigning PCMA/8000 payload type number 8
linphone-message : assigning G722/8000 payload type number 9
linphone-message : assigning L16/44100 payload type number 10
linphone-message : assigning L16/44100 payload type number 11
linphone-message : assigning G729/8000 payload type number 18
linphone-message : assigning H261/90000 payload type number 31
linphone-message : assigning MPV/90000 payload type number 32
linphone-message : assigning H263/90000 payload type number 34
linphone-message : Mediastreamer2 2.9.1 (git: 2.9.0-7-g51d3c20) starting.
linphone-message : ms_base_init() done
linphone-message : Registering all soundcard handlers
linphone-message : Card 'ALSA: default device' added
linphone-message : Card 'PulseAudio: default' added
linphone-message : New PulseAudio context state: PA_CONTEXT_CONNECTING
linphone-message : Registering all webcam handlers
linphone-message : Webcam StaticImage: Static picture added
linphone-message : ms_voip_init() done
linphone-message : Loading ms plugins from [/usr/lib64/mediastreamer/plugins]
linphone-message : Cannot open directory /usr/lib64/mediastreamer/plugins: No such file or directory
linphone-message : Cannot open directory /usr/lib/liblinphone/plugins: No suDEBUG: [get_output_if] connect: Network is unreachable
ch file or directory
linphone-message : linphone_core_set_playback_gain_db(): no active call.
linphone-message : linphone_core_set_mic_gain_db(): no active call.
linphone-message : Could not find encoder for 1016
linphone-message : Could not find decoder for 1016
linphone-message : Could not find encoder for G723
linphone-message : Could not find decoder for G723
linphone-message : Could not find encoder for LPC
linphone-message : Could not find decoder for LPC
linphone-message : Could not find encoder for G729
linphone-message : Could not find decoder for G729
linphone-message : Could not find encoder for telephone-event
linphone-message : Could not find decoder for telephone-event
linphone-message : Could not find encoder for iLBC
linphone-message : Could not find decoder for iLBC
linphone-message : Could not find encoder for AMR
linphone-message : Could not find decoder for AMR
linphone-message : Could not find encoder for AMR-WB
linphone-message : Could not find decoder for AMR-WB
linphone-message : Could not find encoder for 1015
linphone-message : Could not find decoder for 1015
linphone-message : Could not find encoder for SILK
linphone-message : Could not find decoder for SILK
linphone-message : Could not find encoder for SILK
linphone-message : Could not find decoder for SILK
linphone-message : Could not find encoder for SILK
linphone-message : Could not find decoder for SILK
linphone-message : Could not find encoder for SILK
linphone-message : Could not find decoder for SILK
linphone-message : Could not find encoder for mpeg4-generic
linphone-message : Could not find decoder for mpeg4-generic
linphone-message : Could not find encoder for mpeg4-generic
linphone-message : Could not find decoder for mpeg4-generic
linphone-message : Could not find encoder for H261
linphone-message : Could not find decoder for H261
linphone-message : Could not find encoder for MPV
linphone-message : Could not find decoder for MPV
linphone-message : Could not find encoder for H263
linphone-message : Could not find decoder for H263
linphone-message : Could not find encoder for H263-1998
linphone-message : Could not find decoder for H263-1998
linphone-message : Could not find encoder for MP4V-ES
linphone-message : Could not find decoder for MP4V-ES
linphone-message : Could not find encoder for x-snow
linphone-message : Could not find decoder for x-snow
linphone-message : Could not find encoder for H264
linphone-message : Could not find decoder for H264
linphone-message : DNS resolution with ::0:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : :: port 5060
linphone-message : eXosip: Reseting timer to 10s before waking up!
linphone-message : New PulseAudio context state: PA_CONTEXT_AUTHORIZING
linphone-message : New PulseAudio context state: PA_CONTEXT_SETTING_NAME
linphone-message : New PulseAudio context state: PA_CONTEXT_READY
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : New local ip address is 3ffe::100
linphone-message : Network state is now [UP]
linphone-message : Local interface to reach 2ffe::a66:b99b is 3ffe::100.
linphone-message : allocating transaction ressource 1 866090873
linphone-message : allocating NICT context
linphone-message : DNS resolution with 2ffe::a66:b99b:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : 2ffe::a66:b99b port 5060
linphone-message : New binding with 2ffe::a66:b99b:5060
linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress
linphone-message : cb_sndregister (id=1)
linphone-message : keep alive: 0
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress
linphone-message : eXosip: timer sec:0 usec:509938!
linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22]
linphone-message : DNS resolution with 2ffe::a66:b99b:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : 2ffe::a66:b99b port 5060
linphone-message : New binding with 2ffe::a66:b99b:5060
linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress
linphone-message : keep alive: 1
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress
linphone-message : eXosip: timer sec:1 usec:10000!
linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22]
linphone-message : DNS resolution with 2ffe::a66:b99b:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : 2ffe::a66:b99b port 5060
linphone-message : New binding with 2ffe::a66:b99b:5060
linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress
linphone-message : keep alive: 1
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress
linphone-message : eXosip: timer sec:2 usec:10000!
linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22]
linphone-message : DNS resolution with 2ffe::a66:b99b:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : 2ffe::a66:b99b port 5060
linphone-message : New binding with 2ffe::a66:b99b:5060
linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress
linphone-message : keep alive: 2
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress
linphone-message : eXosip: timer sec:4 usec:10000!
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22]
linphone-message : DNS resolution with 2ffe::a66:b99b:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : 2ffe::a66:b99b port 5060
linphone-message : New binding with 2ffe::a66:b99b:5060
linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress
linphone-message : keep alive: 4
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress
linphone-message : eXosip: timer sec:4 usec:10000!
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22]
linphone-message : DNS resolution with 2ffe::a66:b99b:5060
linphone-message : getaddrinfo returned the following addresses:
linphone-message : 2ffe::a66:b99b port 5060
linphone-message : New binding with 2ffe::a66:b99b:5060
linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress
linphone-message : cb_transport_error (id=1)
linphone-message : cb_nict_kill_transaction (id=1)
linphone-message : keep alive: 4
linphone-message : Cannot connect socket node / select timeout (0 ms)
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress
linphone-message : eXosip: Reseting timer to 10s before waking up!
linphone-message : linphone process event get a message 2
linphone-message : REGISTRATION_FAILURE
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : keep alive: 10
linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060 , socket 25 [pos=0], connected
linphone-message : eXosip: Reseting timer to 10s before waking up!
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100.
linphone-message : keep alive: 10